This cop tries to produce a complexity score that's a measure of the complexity the reader experiences when looking at a method. For that reason it considers when nodes as something that doesn't add as much complexity as an if or a &&. Except if it's one of those special case/when constructs where there's no expression after case. Then the cop treats it as an if/elsif/elsif... and lets all the when nodes count. In contrast to the CyclomaticComplexity cop, this cop considers else nodes as adding complexity.

Example:

def my_method                   # 1
  if cond                       # 1
    case var                    # 2 (0.8 + 4 * 0.2, rounded)
    when 1 then func_one
    when 2 then func_two
    when 3 then func_three
    when 4..10 then func_other
    end
  else                          # 1
    do_something until a && b   # 2
  end                           # ===
end                             # 7 complexity points

This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.

An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

This cop checks the indentation of the right hand side operand in binary operations that span more than one line.

Example:

# bad
if a +
b
  something
end

# good
if a +
   b
  something
end

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}

This cop checks for uses of class variables. Offenses are signaled only on assignment to class variables to reduce the number of offenses that would be reported.

This cop checks for the use of the hasandbelongstomany macro.

Example:

# bad
# has_and_belongs_to_many :ingredients

# good
# has_many :ingredients, through: :recipe_ingredients

This cop checks hash literal syntax.

It can enforce either the use of the class hash rocket syntax or the use of the newer Ruby 1.9 syntax (when applicable).

A separate offense is registered for each problematic pair.

The supported styles are:

• ruby19 - forces use of the 1.9 syntax (e.g. {a: 1}) when hashes have all symbols for keys
• hash_rockets - forces use of hash rockets for all hashes
• nomixedkeys - simply checks for hashes with mixed syntaxes
• ruby19nomixed_keys - forces use of ruby 1.9 syntax and forbids mixed syntax hashes

Example: EnforcedStyle: ruby19 (default)

# bad
{:a => 2}
{b: 1, :c => 2}

# good
{a: 2, b: 1}
{:c => 2, 'd' => 2} # acceptable since 'd' isn't a symbol
{d: 1, 'e' => 2} # technically not forbidden

Example: EnforcedStyle: hash_rockets

# bad
{a: 1, b: 2}
{c: 1, 'd' => 5}

# good
{:a => 1, :b => 2}

Example: EnforcedStyle: nomixedkeys

# bad
{:a => 1, b: 2}
{c: 1, 'd' => 2}

# good
{:a => 1, :b => 2}
{c: 1, d: 2}

Example: EnforcedStyle: ruby19nomixed_keys

# bad
{:a => 1, :b => 2}
{c: 2, 'd' => 3} # should just use hash rockets

# good
{a: 1, b: 2}
{:c => 3, 'd' => 4}