Sign upLogin

AndyObtiva/glimmer-dsl-swt

View on GitHub
Star

Showing 166 of 401 total issues

Similar blocks of code found in 9 locations. Consider refactoring.
Open

            @line_oval1 = oval {
              x          <= [@line, :x1_value, on_read: ->(val) {val - 5}]
              y          <= [@line, :y1_value, on_read: ->(val) {val - 5}]
              width 10
              height 10
Severity: Major
Found in samples/hello/hello_canvas_data_binding.rb and 8 other locations - About 35 mins to fix
samples/hello/hello_canvas_data_binding.rb on lines 275..281
samples/hello/hello_canvas_data_binding.rb on lines 509..515
samples/hello/hello_canvas_data_binding.rb on lines 517..523
samples/hello/hello_canvas_data_binding.rb on lines 525..531
samples/hello/hello_canvas_data_binding.rb on lines 792..798
samples/hello/hello_canvas_data_binding.rb on lines 800..806
samples/hello/hello_canvas_data_binding.rb on lines 808..814
samples/hello/hello_canvas_data_binding.rb on lines 816..822

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

            @quad_oval3 = oval {
              x          <= [@quad, :x2_value, on_read: ->(val) {val - 5}]
              y          <= [@quad, :y2_value, on_read: ->(val) {val - 5}]
              width 10
              height 10
Severity: Major
Found in samples/hello/hello_canvas_data_binding.rb and 8 other locations - About 35 mins to fix
samples/hello/hello_canvas_data_binding.rb on lines 267..273
samples/hello/hello_canvas_data_binding.rb on lines 275..281
samples/hello/hello_canvas_data_binding.rb on lines 509..515
samples/hello/hello_canvas_data_binding.rb on lines 517..523
samples/hello/hello_canvas_data_binding.rb on lines 792..798
samples/hello/hello_canvas_data_binding.rb on lines 800..806
samples/hello/hello_canvas_data_binding.rb on lines 808..814
samples/hello/hello_canvas_data_binding.rb on lines 816..822

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 9 locations. Consider refactoring.
Open

            @cubic_oval2 = oval {
              x          <= [@cubic, :cx1_value, on_read: ->(val) {val - 5}]
              y          <= [@cubic, :cy1_value, on_read: ->(val) {val - 5}]
              width 10
              height 10
Severity: Major
Found in samples/hello/hello_canvas_data_binding.rb and 8 other locations - About 35 mins to fix
samples/hello/hello_canvas_data_binding.rb on lines 267..273
samples/hello/hello_canvas_data_binding.rb on lines 275..281
samples/hello/hello_canvas_data_binding.rb on lines 509..515
samples/hello/hello_canvas_data_binding.rb on lines 517..523
samples/hello/hello_canvas_data_binding.rb on lines 525..531
samples/hello/hello_canvas_data_binding.rb on lines 792..798
samples/hello/hello_canvas_data_binding.rb on lines 808..814
samples/hello/hello_canvas_data_binding.rb on lines 816..822

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            background <= [self, :base_color, on_read: ->(color_value) {
              unless color_value.nil?
                color = color(color_value)
                rgb(color.red + 4*BEVEL_CONSTANT, color.green + 4*BEVEL_CONSTANT, color.blue + 4*BEVEL_CONSTANT)
              end
Severity: Minor
Found in samples/elaborate/tetris/view/bevel.rb and 1 other location - About 35 mins to fix
samples/elaborate/tetris/view/bevel.rb on lines 56..61

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def default_width?
          return false unless current_parameter_name?(:width)
          width = self.width
          (width.nil? || width == :default || width == 'default' || (width.is_a?(Array) && (width.first.to_s == :default || width.first.to_s == 'default')))
Severity: Minor
Found in lib/glimmer/swt/custom/shape.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/custom/shape.rb on lines 1194..1197

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def default_height?
          return false unless current_parameter_name?(:height)
          height = self.height
          (height.nil? || height == :default || height == 'default' || (height.is_a?(Array) && (height.first.to_s == :default || height.first.to_s == 'default')))
Severity: Minor
Found in lib/glimmer/swt/custom/shape.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/custom/shape.rb on lines 1188..1191

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def interpret(parent, keyword, *args, &block)
          options = args.last.is_a?(Hash) ? args.pop : {}
            UI::CustomShape.for(keyword).new(parent, *args, options, &block).tap do |new_custom_shape|
            new_custom_shape.body_root.paint_pixel_by_pixel(&block) if block&.parameters&.count == 2
Severity: Minor
Found in lib/glimmer/dsl/swt/custom_shape_expression.rb and 1 other location - About 35 mins to fix
lib/glimmer/dsl/swt/custom_widget_expression.rb on lines 48..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            background <= [self, :base_color, on_read: ->(color_value) {
              unless color_value.nil?
                color = color(color_value)
                rgb(color.red - 2*BEVEL_CONSTANT, color.green - 2*BEVEL_CONSTANT, color.blue - 2*BEVEL_CONSTANT)
              end
Severity: Minor
Found in samples/elaborate/tetris/view/bevel.rb and 1 other location - About 35 mins to fix
samples/elaborate/tetris/view/bevel.rb on lines 40..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        menu {
          text '&Archived'
          
          menu_item {
            text 'File 3'
Severity: Minor
Found in samples/hello/hello_pop_up_context_menu.rb and 2 other locations - About 35 mins to fix
samples/hello/hello_menu_bar.rb on lines 69..89
samples/hello/hello_pop_up_context_menu.rb on lines 42..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

      menu {
        text 'Open &Recent'

        menu_item {
          text 'File 1'
Severity: Minor
Found in samples/hello/hello_menu_bar.rb and 2 other locations - About 35 mins to fix
samples/hello/hello_pop_up_context_menu.rb on lines 42..62
samples/hello/hello_pop_up_context_menu.rb on lines 68..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                table_editor_widget_proxy = spinner(*args) {
                  selection model.send(property)
                  focus true
                  on_focus_lost {
                    table_proxy.finish_edit!
Severity: Minor
Found in lib/glimmer/swt/table_proxy.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/table_proxy.rb on lines 65..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        menu {
          text '&Recent'
          
          menu_item {
            text 'File 1'
Severity: Minor
Found in samples/hello/hello_pop_up_context_menu.rb and 2 other locations - About 35 mins to fix
samples/hello/hello_menu_bar.rb on lines 69..89
samples/hello/hello_pop_up_context_menu.rb on lines 68..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                table_editor_widget_proxy = text(*args) {
                  text model.send(property)
                  focus true
                  on_focus_lost {
                    table_proxy.finish_edit!
Severity: Minor
Found in lib/glimmer/swt/table_proxy.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/table_proxy.rb on lines 227..238

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def absolute_x
          absolute_x_dependencies = [calculated_x, parent.is_a?(Shape) && parent.absolute_x]
          if absolute_x_dependencies != @absolute_x_dependencies
            # do not repeat calculations
            calculated_x, parent_absolute_x = @absolute_x_dependencies = absolute_x_dependencies
Severity: Minor
Found in lib/glimmer/swt/custom/shape.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/custom/shape.rb on lines 1416..1427

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def absolute_y
          absolute_y_dependencies = [calculated_y, parent.is_a?(Shape) && parent.absolute_y]
          if absolute_y_dependencies != @absolute_y_dependencies
            calculated_y, parent_absolute_y = @absolute_y_dependencies = absolute_y_dependencies
            y = calculated_y
Severity: Minor
Found in lib/glimmer/swt/custom/shape.rb and 1 other location - About 35 mins to fix
lib/glimmer/swt/custom/shape.rb on lines 1401..1413

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    animation {
      every 0.01 # in seconds (one hundredth)
            
      frame { |index| # frame block loops indefinitely (unless frame_count is set to an integer)
        oval(0, 0, 400, 400) { # x, y, width, height
Severity: Minor
Found in samples/hello/hello_canvas_animation_multi.rb and 1 other location - About 35 mins to fix
samples/hello/hello_canvas_animation_multi.rb on lines 33..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 34.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    animation {
      every 0.01 # in seconds (one hundredth)
            
      frame { |index| # frame block loops indefinitely (unless frame_count is set to an integer)
        oval(0, 0, 400, 400) { # x, y, width, height
Severity: Minor
Found in samples/hello/hello_canvas_animation_multi.rb and 1 other location - About 35 mins to fix
samples/hello/hello_canvas_animation_multi.rb on lines 96..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 34.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      before_body do
        self.location_x ||= 0
        self.location_y ||= 0
        self.rectangle_width ||= rectangle_height || cube_height || DEFAULT_SIZE
        self.rectangle_height ||= rectangle_width || cube_height || DEFAULT_SIZE
Severity: Minor
Found in samples/elaborate/quarto/view/cube.rb and 1 other location - About 30 mins to fix
samples/elaborate/quarto/view/cylinder.rb on lines 32..38

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      before_body do
        self.location_x ||= 0
        self.location_y ||= 0
        self.oval_width ||= oval_height || cylinder_height || DEFAULT_SIZE
        self.oval_height ||= oval_width || cylinder_height || DEFAULT_SIZE
Severity: Minor
Found in samples/elaborate/quarto/view/cylinder.rb and 1 other location - About 30 mins to fix
samples/elaborate/quarto/view/cube.rb on lines 32..38

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def set_attribute(attribute_name, *args)
          excluded_attributes = ['selection']
          unless excluded_attributes.include?(attribute_name.to_s)
            (@composites.to_a + @radios.to_a + @labels.to_a).each do |widget_proxy|
              widget_proxy.set_attribute(attribute_name, *args) if widget_proxy.has_attribute?(attribute_name, *args)
Severity: Minor
Found in lib/glimmer/swt/custom/radio_group.rb and 1 other location - About 30 mins to fix
lib/glimmer/swt/custom/checkbox_group.rb on lines 122..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language