Method has too many lines. [116/25] Open
def read_shape(filename, index)
# TODO: For some reason, Gis::FACTORY does not seem to be the default factory, so we are being specific here, to get the lenient polygon tests. This gets us past the problem polygons, but does not actually deal with the problem.
# See http://dazuma.github.io/rgeo-shapefile/rdoc/RGeo/Shapefile/Reader.html for reader options.
# ne10 = RGeo::Shapefile::Reader.open('G:\Share\Downloads\PostgreSQL\PostGIS\10m_cultural\10m_cultural\ne_10m_admin_0_countries.shp', factory: Gis::FACTORY)
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Avoid more than 3 levels of block nesting. Open
s1 = i1.empty? ? '' : (i1 + ', ')
- Read upRead up
- Exclude checks
This cop checks for excessive nesting of conditional and looping constructs.
You can configure if blocks are considered using the CountBlocks
option. When set to false
(the default) blocks are not counted
towards the nesting level. Set to true
to count blocks as well.
The maximum level of nesting allowed is configurable.
Avoid more than 3 levels of block nesting. Open
s5 = i5.empty? ? '' : (i5 + ', ')
- Read upRead up
- Exclude checks
This cop checks for excessive nesting of conditional and looping constructs.
You can configure if blocks are considered using the CountBlocks
option. When set to false
(the default) blocks are not counted
towards the nesting level. Set to true
to count blocks as well.
The maximum level of nesting allowed is configurable.
Avoid more than 3 levels of block nesting. Open
s4 = i4.empty? ? '' : (i4 + ', ')
- Read upRead up
- Exclude checks
This cop checks for excessive nesting of conditional and looping constructs.
You can configure if blocks are considered using the CountBlocks
option. When set to false
(the default) blocks are not counted
towards the nesting level. Set to true
to count blocks as well.
The maximum level of nesting allowed is configurable.
Avoid more than 3 levels of block nesting. Open
s3 = i3.empty? ? '' : (i3 + ', ')
- Read upRead up
- Exclude checks
This cop checks for excessive nesting of conditional and looping constructs.
You can configure if blocks are considered using the CountBlocks
option. When set to false
(the default) blocks are not counted
towards the nesting level. Set to true
to count blocks as well.
The maximum level of nesting allowed is configurable.
Avoid more than 3 levels of block nesting. Open
s2 = i2.empty? ? '' : (i2 + ', ')
- Read upRead up
- Exclude checks
This cop checks for excessive nesting of conditional and looping constructs.
You can configure if blocks are considered using the CountBlocks
option. When set to false
(the default) blocks are not counted
towards the nesting level. Set to true
to count blocks as well.
The maximum level of nesting allowed is configurable.
TODO found Open
# TODO: For some reason, Gis::FACTORY does not seem to be the default factory, so we are being specific here, to get the lenient polygon tests. This gets us past the problem polygons, but does not actually deal with the problem.
- Exclude checks
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item['LEVEL1_COD']}, #{item['LEVEL1_NAM']}: #{item_type}, (#{count_geo} geometr#{ess})"
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item['LEVEL2_COD']}, #{item['LEVEL2_NAM']}, #{item['LEVEL1_NAM']}: #{item_type}, (#{count_geo} geometr#{ess})"
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
o2 = Time.at(elapsed).getgm.strftime '%H:%M:%S'
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item_type}#{'% 5d' % (item.index + 1)} (of #{count} items)(#{count_geo} geometr#{ess}) is called \'#{s5}#{s4}#{s3}#{s2}#{s1}#{item['NAME_0']}\'."
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
o2 = Time.at(elapsed).getgm.strftime '%H:%M:%S'
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.now
without zone. Use one of Time.zone.now
, Time.current
, Time.now.in_time_zone
, Time.now.utc
, Time.now.getlocal
, Time.now.xmlschema
, Time.now.iso8601
, Time.now.jisx0301
, Time.now.rfc3339
, Time.now.httpdate
, Time.now.to_i
, Time.now.to_f
instead. Open
time_then = Time.now
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
o1 = Time.at(time_then).strftime '%T'
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
o1 = Time.at(time_then).strftime '%T'
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item_type}#{'% 5d' % (item.index + 1)} (of #{count} items)(#{count_geo} geometr#{ess}) is called \'#{s5}#{s4}#{s3}#{s2}#{s1}#{item['NAME_0']}\'."
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item['LEVEL2_COD']}, #{item['LEVEL2_NAM']}, #{item['LEVEL1_NAM']}: #{item_type}, (#{count_geo} geometr#{ess})"
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.now
without zone. Use one of Time.zone.now
, Time.current
, Time.now.in_time_zone
, Time.now.utc
, Time.now.getlocal
, Time.now.xmlschema
, Time.now.iso8601
, Time.now.jisx0301
, Time.now.rfc3339
, Time.now.httpdate
, Time.now.to_i
, Time.now.to_f
instead. Open
puts "#{Time.now.strftime "%H:%M:%S"}: #{filename} contains #{count} item#{ess}."
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.at
without zone. Use one of Time.zone.at
, Time.current
, Time.at.in_time_zone
, Time.at.utc
, Time.at.getlocal
, Time.at.xmlschema
, Time.at.iso8601
, Time.at.jisx0301
, Time.at.rfc3339
, Time.at.httpdate
, Time.at.to_i
, Time.at.to_f
instead. Open
puts "#{Time.at(time_then).strftime "%T"}: #{Time.at(elapsed).getgm.strftime "%H:%M:%S"}: #{item['LEVEL1_COD']}, #{item['LEVEL1_NAM']}: #{item_type}, (#{count_geo} geometr#{ess})"
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone
Do not use Time.now
without zone. Use one of Time.zone.now
, Time.current
, Time.now.in_time_zone
, Time.now.utc
, Time.now.getlocal
, Time.now.xmlschema
, Time.now.iso8601
, Time.now.jisx0301
, Time.now.rfc3339
, Time.now.httpdate
, Time.now.to_i
, Time.now.to_f
instead. Open
snap = Time.now
- Read upRead up
- Exclude checks
This cop checks for the use of Time methods without zone.
Built on top of Ruby on Rails style guide (https://github.com/rubocop-hq/rails-style-guide#time) and the article http://danilenko.org/2012/7/6/rails_timezones/
Two styles are supported for this cop. When EnforcedStyle is 'strict' then only use of Time.zone is allowed.
When EnforcedStyle is 'flexible' then it's also allowed to use Time.intimezone.
Example: EnforcedStyle: strict
# `strict` means that `Time` should be used with `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# bad
Time.current
Time.at(timestamp).in_time_zone
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
Example: EnforcedStyle: flexible (default)
# `flexible` allows usage of `in_time_zone` instead of `zone`.
# bad
Time.now
Time.parse('2015-03-02 19:05:37')
# good
Time.zone.now
Time.zone.parse('2015-03-02 19:05:37')
# good
Time.current
Time.at(timestamp).in_time_zone