SquirrelJME/SquirrelJME

View on GitHub

Showing 54 of 178 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public String toUpperCase()
    {
        // If this string is uppercased already do not mess with it
        if ((this._quickflags & String._QUICK_ISUPPER) != 0)
            return this;
Severity: Major
Found in modules/cldc-compact/src/main/java/java/lang/String.java and 1 other location - About 1 hr to fix
modules/cldc-compact/src/main/java/java/lang/String.java on lines 1247..1285

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 183.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectByte.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectDouble.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectInteger.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectLong.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectShort.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectByte.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectDouble.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectFloat.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectLong.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectShort.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectByte.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectFloat.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectInteger.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectLong.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectShort.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectByte.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectDouble.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectFloat.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectInteger.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectLong.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectDouble.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectFloat.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectInteger.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectLong.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectShort.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectByte.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectDouble.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectFloat.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectInteger.java on lines 1..125
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/SpringArrayObjectShort.java on lines 1..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static CharSequence[] fieldSplit(char __delim,
        CharSequence __s)
        throws NullPointerException
    {
        if (__s == null)
modules/strings/src/main/java/net/multiphasicapps/strings/CharSequenceUtils.java on lines 42..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 163.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static final CharSequence[] fieldSplit(char __delim,
        CharSequence __s)
        throws NullPointerException
    {
        if (__s == null)
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharSequenceUtils.java on lines 42..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 163.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
modules/tool-classfile/src/main/java/dev/shadowtail/classfile/xlate/ExceptionClassEnqueueAndTable.java on lines 1..91

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
modules/tool-classfile/src/main/java/dev/shadowtail/classfile/xlate/ExceptionClassStackAndTable.java on lines 1..91

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/FloatBuffer.java and 2 other locations - About 1 hr to fix
modules/cldc/src/main/java/java/nio/IntBuffer.java on lines 1..113
modules/cldc/src/main/java/java/nio/ShortBuffer.java on lines 1..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 160.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/IntBuffer.java and 2 other locations - About 1 hr to fix
modules/cldc/src/main/java/java/nio/FloatBuffer.java on lines 1..114
modules/cldc/src/main/java/java/nio/ShortBuffer.java on lines 1..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 160.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/ShortBuffer.java and 2 other locations - About 1 hr to fix
modules/cldc/src/main/java/java/nio/FloatBuffer.java on lines 1..114
modules/cldc/src/main/java/java/nio/IntBuffer.java on lines 1..113

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 160.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/exceptions/SpringClassNotFoundException.java on lines 1..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
emulators/springcoat-vm/src/main/java/cc/squirreljme/vm/springcoat/exceptions/SpringClassFormatException.java on lines 1..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public Point(String __s)
        throws IllegalArgumentException, NullPointerException
    {
        if (__s == null)
            throw new NullPointerException("NARG");
modules/squirrel-quarrel/src/main/java/net/multiphasicapps/squirrelquarrel/util/Dimension.java on lines 53..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public Dimension(String __s)
        throws IllegalArgumentException, NullPointerException
    {
        if (__s == null)
            throw new NullPointerException("NARG");
modules/squirrel-quarrel/src/main/java/net/multiphasicapps/squirrelquarrel/util/Point.java on lines 53..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 150.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
modules/cldc-compact/src/main/java/java/util/__AbstractMapValues__.java on lines 1..132

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
modules/cldc-compact/src/main/java/java/util/__AbstractMapKeySet__.java on lines 1..132

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language