# TabbycatDebate/tabbycat

### Summary

C
1 day
F
10%

#### Cyclomatic complexity is too high in method run_allocation. (33) Open

``````    def run_allocation(self):

# Sort voting adjudicators in descending order by score
voting = [a for a in self.adjudicators if a._weighted_score >= self.min_voting_score and not a.trainee]
random.shuffle(voting)``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in class VotingHungarianAllocator. (33) Open

``````@register
class VotingHungarianAllocator(BaseHungarianAllocator):

key = "hungarian-voting"

``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Function `run_allocation` has a Cognitive Complexity of 31 (exceeds 8 allowed). Consider refactoring. Open

``````    def run_allocation(self):

# Sort voting adjudicators in descending order by score
voting = [a for a in self.adjudicators if a._weighted_score >= self.min_voting_score and not a.trainee]
random.shuffle(voting)``````

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Cyclomatic complexity is too high in method run_allocation. (17) Open

``````    def run_allocation(self):

# Sort voting adjudicators in descending order by score
voting = [a for a in self.adjudicators if a._weighted_score >= self.min_voting_score and not a.trainee]
random.shuffle(voting)``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in class ConsensusHungarianAllocator. (17) Open

``````@register
class ConsensusHungarianAllocator(BaseHungarianAllocator):

key = "hungarian-consensus"

``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Function `run_allocation` has a Cognitive Complexity of 10 (exceeds 8 allowed). Consider refactoring. Open

``````    def run_allocation(self):

# Sort voting adjudicators in descending order by score
voting = [a for a in self.adjudicators if a._weighted_score >= self.min_voting_score and not a.trainee]
random.shuffle(voting)``````

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Identical blocks of code found in 2 locations. Consider refactoring. Open

``````        if self.no_trainees:
trainees = []
else:
trainees = [a for a in self.adjudicators if a not in voting]
trainees.sort(key=lambda a: a._normalized_score, reverse=True)``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 1 hr to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Open

``````        if self.no_trainees:
trainees = []
else:
trainees = [a for a in self.adjudicators if a not in voting]
trainees.sort(key=lambda a: a._normalized_score, reverse=True)``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 1 hr to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Open

``````        for team in debate.teams:
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 1 hr to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Open

``````        if ntoolarge > 0:
warning_msg = ngettext(
"%(count)s score is larger than the maximum permitted adjudicator score (%(score).1f).",
"%(count)s scores are larger than the maximum permitted adjudicator score (%(score).1f).",
ntoolarge,``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 55 mins to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Open

``````        if ntoosmall > 0:
warning_msg = ngettext(
"%(count)s score is smaller than the minimum permitted adjudicator score (%(score).1f).",
"%(count)s scores are smaller than the minimum permitted adjudicator score (%(score).1f).",
ntoosmall,``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 55 mins to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Open

``````        if n_voting < n_debates:
warning_msg = _("There are %(debates_count)s debates but only "
'debates_count': n_debates,
'voting_count': n_voting,``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 35 mins to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Open

``````        if n_voting < n_debates:
warning_msg = _("There are %(debate_count)s debates but only %(adj_count)s "
self.user_warnings.append(warning_msg)
logger.warning(warning_msg)``````
Found in tabbycat/adjallocation/allocators/hungarian.py and 1 other location - About 35 mins to fix

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 51.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.