Sign upLogin

WeAreFarmGeek/diplomat

View on GitHub
Star

Showing 19 of 64 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def read(id, options = {}, not_found = :reject, found = :return)
      @options = options
      custom_params = []
      custom_params << use_consistency(options)
Severity: Major
Found in lib/diplomat/role.rb and 2 other locations - About 2 hrs to fix
lib/diplomat/policy.rb on lines 14..44
lib/diplomat/role.rb on lines 53..83

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 99.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def read(id, options = {}, not_found = :reject, found = :return)
      @options = options
      custom_params = []
      custom_params << use_consistency(options)
Severity: Major
Found in lib/diplomat/policy.rb and 2 other locations - About 2 hrs to fix
lib/diplomat/role.rb on lines 14..44
lib/diplomat/role.rb on lines 53..83

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 99.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def read_name(name, options = {}, not_found = :reject, found = :return)
      @options = options
      custom_params = []
      custom_params << use_consistency(options)
Severity: Major
Found in lib/diplomat/role.rb and 2 other locations - About 2 hrs to fix
lib/diplomat/policy.rb on lines 14..44
lib/diplomat/role.rb on lines 14..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 99.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def create(value, options = {})
      blacklist = ['ID', 'iD', 'Id', :ID, :iD, :Id] & value.keys
      raise Diplomat::RoleMalformed, 'ID should not be specified' unless blacklist.empty?

      id = value[:Name] || value['Name']
Severity: Major
Found in lib/diplomat/role.rb and 1 other location - About 2 hrs to fix
lib/diplomat/policy.rb on lines 84..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def create(value, options = {})
      blacklist = ['ID', 'iD', 'Id', :ID, :iD, :Id] & value.keys
      raise Diplomat::PolicyMalformed, 'ID should not be specified' unless blacklist.empty?

      id = value[:Name] || value['Name']
Severity: Major
Found in lib/diplomat/policy.rb and 1 other location - About 2 hrs to fix
lib/diplomat/role.rb on lines 123..140

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def update(value, options = {})
      id = value[:ID] || value['ID']
      raise Diplomat::IdParameterRequired if id.nil?

      role_name = value[:Name] || value['Name']
Severity: Major
Found in lib/diplomat/role.rb and 1 other location - About 1 hr to fix
lib/diplomat/policy.rb on lines 62..77

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def update(value, options = {})
      id = value[:ID] || value['ID']
      raise Diplomat::IdParameterRequired if id.nil?

      policy_name = value[:Name] || value['Name']
Severity: Major
Found in lib/diplomat/policy.rb and 1 other location - About 1 hr to fix
lib/diplomat/role.rb on lines 101..116

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def checks(s, options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]
      custom_params << use_named_parameter('filter', options[:filter]) if options[:filter]
Severity: Minor
Found in lib/diplomat/health.rb and 1 other location - About 1 hr to fix
lib/diplomat/health.rb on lines 13..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def node(n, options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]
      custom_params << use_named_parameter('filter', options[:filter]) if options[:filter]
Severity: Minor
Found in lib/diplomat/health.rb and 1 other location - About 1 hr to fix
lib/diplomat/health.rb on lines 26..32

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if meta && ret.headers
        meta[:index] = ret.headers['x-consul-index'] if ret.headers['x-consul-index']
        meta[:knownleader] = ret.headers['x-consul-knownleader'] if ret.headers['x-consul-knownleader']
        meta[:lastcontact] = ret.headers['x-consul-lastcontact'] if ret.headers['x-consul-lastcontact']
      end
Severity: Major
Found in lib/diplomat/health.rb and 2 other locations - About 50 mins to fix
lib/diplomat/datacenter.rb on lines 15..19
lib/diplomat/service.rb on lines 24..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if meta && ret.headers
        meta[:index] = ret.headers['x-consul-index'] if ret.headers['x-consul-index']
        meta[:knownleader] = ret.headers['x-consul-knownleader'] if ret.headers['x-consul-knownleader']
        meta[:lastcontact] = ret.headers['x-consul-lastcontact'] if ret.headers['x-consul-lastcontact']
      end
Severity: Major
Found in lib/diplomat/service.rb and 2 other locations - About 50 mins to fix
lib/diplomat/datacenter.rb on lines 15..19
lib/diplomat/health.rb on lines 52..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

      if meta && ret.headers
        meta[:index] = ret.headers['x-consul-index'] if ret.headers['x-consul-index']
        meta[:knownleader] = ret.headers['x-consul-knownleader'] if ret.headers['x-consul-knownleader']
        meta[:lastcontact] = ret.headers['x-consul-lastcontact'] if ret.headers['x-consul-lastcontact']
      end
Severity: Major
Found in lib/diplomat/datacenter.rb and 2 other locations - About 50 mins to fix
lib/diplomat/health.rb on lines 52..56
lib/diplomat/service.rb on lines 24..28

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def node(name, options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]
      raw = send_get_request(@conn, ["/v1/session/node/#{name}"], options, custom_params)
      JSON.parse(raw.body).map { |session| OpenStruct.new session }
Severity: Minor
Found in lib/diplomat/session.rb and 1 other location - About 35 mins to fix
lib/diplomat/session.rb on lines 59..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def info(id, options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]
      raw = send_get_request(@conn, ["/v1/session/info/#{id}"], options, custom_params)
      JSON.parse(raw.body).map { |session| OpenStruct.new session }
Severity: Minor
Found in lib/diplomat/session.rb and 1 other location - About 35 mins to fix
lib/diplomat/session.rb on lines 70..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def get_all(options = {})
      custom_params = options[:dc] ? use_named_parameter('dc', options[:dc]) : nil
      ret = send_get_request(@conn, ['/v1/catalog/nodes'], options, custom_params)
      JSON.parse(ret.body).map { |service| OpenStruct.new service }
Severity: Minor
Found in lib/diplomat/node.rb and 2 other locations - About 30 mins to fix
lib/diplomat/nodes.rb on lines 18..21
lib/diplomat/query.rb on lines 21..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def get_all(options = {})
      custom_params = options[:dc] ? use_named_parameter('dc', options[:dc]) : nil
      ret = send_get_request(@conn, ['/v1/catalog/nodes'], options, custom_params)
      JSON.parse(ret.body).map { |service| OpenStruct.new service }
Severity: Minor
Found in lib/diplomat/nodes.rb and 2 other locations - About 30 mins to fix
lib/diplomat/node.rb on lines 21..24
lib/diplomat/query.rb on lines 21..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def get_all(options = {})
      custom_params = options[:dc] ? use_named_parameter('dc', options[:dc]) : nil
      ret = send_get_request(@conn, ['/v1/query'], options, custom_params)
      JSON.parse(ret.body).map { |query| OpenStruct.new query }
Severity: Minor
Found in lib/diplomat/query.rb and 2 other locations - About 30 mins to fix
lib/diplomat/node.rb on lines 21..24
lib/diplomat/nodes.rb on lines 18..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def get_configuration(options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]

      ret = send_get_request(@conn, ['/v1/operator/autopilot/configuration'], options, custom_params)
Severity: Minor
Found in lib/diplomat/autopilot.rb and 1 other location - About 20 mins to fix
lib/diplomat/autopilot.rb on lines 22..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def get_health(options = {})
      custom_params = []
      custom_params << use_named_parameter('dc', options[:dc]) if options[:dc]

      ret = send_get_request(@conn, ['/v1/operator/autopilot/health'], options, custom_params)
Severity: Minor
Found in lib/diplomat/autopilot.rb and 1 other location - About 20 mins to fix
lib/diplomat/autopilot.rb on lines 11..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language