Method find
has 52 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function find($value): array
{
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
return [];
}
Function find
has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring. Open
public function find($value): array
{
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
return [];
}
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
The method find() has an NPath complexity of 348. The configured NPath complexity threshold is 200. Open
public function find($value): array
{
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
return [];
}
- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}
Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method find() has a Cyclomatic Complexity of 12. The configured cyclomatic complexity threshold is 10. Open
public function find($value): array
{
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
return [];
}
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Missing class import via use statement (line '83', column '15'). Open
throw new \App\Exceptions\AppException('Error with connection |' . $response->getReasonPhrase() . '|' . $response->getBody());
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '79', column '21'). Open
$response = (new \GuzzleHttp\Client(\App\RequestHttp::getOptions()))
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Avoid using static access to class '\App\Log' in method 'find'. Open
\App\Log::error('Error - ' . $ex->getMessage(), __CLASS__);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Map\Address' in method 'find'. Open
}
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\RequestUtil' in method 'find'. Open
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Config' in method 'find'. Open
'accept-language' => \App\Language::getLanguage() . ',' . \App\Config::main('default_language') . ',en-US',
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Config\Components\AddressFinder' in method 'find'. Open
$mainMapping = \Config\Components\AddressFinder::nominatimRemapping();
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Config\Components\AddressFinder' in method 'find'. Open
$countryMapping = \Config\Components\AddressFinder::nominatimRemappingForCountry();
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Log' in method 'find'. Open
\App\Log::endProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'find'. Open
$body = \App\Json::isEmpty($body) ? [] : \App\Json::decode($body);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Language' in method 'find'. Open
'accept-language' => \App\Language::getLanguage() . ',' . \App\Config::main('default_language') . ',en-US',
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Json' in method 'find'. Open
$body = \App\Json::isEmpty($body) ? [] : \App\Json::decode($body);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\RequestHttp' in method 'find'. Open
$response = (new \GuzzleHttp\Client(\App\RequestHttp::getOptions()))
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\App\Log' in method 'find'. Open
\App\Log::beginProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Define a constant instead of duplicating this literal "address" 23 times. Open
if (isset($row['address']['country_code'], $countryMapping[strtoupper($row['address']['country_code'])])) {
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "label" 3 times. Open
'label' => 'LBL_COUNTRY_CODES',
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "country_code" 5 times. Open
if (isset($row['address']['country_code'], $countryMapping[strtoupper($row['address']['country_code'])])) {
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "map_url" 3 times. Open
'map_url' => [
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Define a constant instead of duplicating this literal "country_codes" 3 times. Open
'country_codes' => [
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
function run() { prepare('action1'); // Non-Compliant - 'action1' is duplicated 3 times execute('action1'); release('action1'); }
Compliant Solution
ACTION_1 = 'action1'; function run() { prepare(ACTION_1); execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Avoid unused private methods such as 'parseRow'. Open
private function parseRow(array $row): array
{
return [
'addresslevel1' => [$row['address']['country'] ?? '', strtoupper($row['address']['country_code'] ?? '')],
'addresslevel2' => $row['address']['state'] ?? '',
- Read upRead up
- Exclude checks
UnusedPrivateMethod
Since: 0.2
Unused Private Method detects when a private method is declared but is unused.
Example
class Something
{
private function foo() {} // unused
}
Source https://phpmd.org/rules/unusedcode.html#unusedprivatemethod
Reference to undeclared property \App\Map\Address\NominatimGeocoder->config
Open
if (!empty($this->config['country_codes'])) {
- Exclude checks
Reference to undeclared property \App\Map\Address\NominatimGeocoder->config
Open
$url = $this->config['map_url'] . '?' . http_build_query($params);
- Exclude checks
Class extends undeclared class \App\Map\Address\Base
(Did you mean class \App\Base or class \App\Cache\Base or class \App\Cli\Base or class \App\Controller\Base or class \App\Controller\View\Base or class \App\Db\Importers\Base or class \Tests\Base) Open
class NominatimGeocoder extends Base
- Exclude checks
Call to method request
from undeclared class \GuzzleHttp\Client
Open
$response = (new \GuzzleHttp\Client(\App\RequestHttp::getOptions()))
- Exclude checks
Call to method endProfile
from undeclared class \App\Log
Open
\App\Log::endProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Exclude checks
Call to method nominatimRemappingForCountry
from undeclared class \Config\Components\AddressFinder
Open
$countryMapping = \Config\Components\AddressFinder::nominatimRemappingForCountry();
- Exclude checks
Reference to undeclared property \App\Map\Address\NominatimGeocoder->config
Open
return !empty($this->config['map_url']);
- Exclude checks
Call to method nominatimRemapping
from undeclared class \Config\Components\AddressFinder
Open
$mainMapping = \Config\Components\AddressFinder::nominatimRemapping();
- Exclude checks
Call to method error
from undeclared class \App\Log
Open
\App\Log::error('Error - ' . $ex->getMessage(), __CLASS__);
- Exclude checks
Reference to static property nominatimMapUrlCustomOptions
from undeclared class \Config\Components\AddressFinder
Open
if (!empty(\Config\Components\AddressFinder::$nominatimMapUrlCustomOptions)) {
- Exclude checks
Reference to undeclared property \App\Map\Address\NominatimGeocoder->config
Open
$params['countrycodes'] = $this->config['country_codes'];
- Exclude checks
Reference to static property nominatimMapUrlCustomOptions
from undeclared class \Config\Components\AddressFinder
Open
$options = \Config\Components\AddressFinder::$nominatimMapUrlCustomOptions;
- Exclude checks
Call to method beginProfile
from undeclared class \App\Log
Open
\App\Log::beginProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Exclude checks
Call to method __construct
from undeclared class \GuzzleHttp\Client
Open
$response = (new \GuzzleHttp\Client(\App\RequestHttp::getOptions()))
- Exclude checks
Identical blocks of code found in 2 locations. Consider refactoring. Open
private function parseRow(array $row): array
{
return [
'addresslevel1' => [$row['address']['country'] ?? '', strtoupper($row['address']['country_code'] ?? '')],
'addresslevel2' => $row['address']['state'] ?? '',
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 297.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if ($body) {
$mainMapping = \Config\Components\AddressFinder::nominatimRemapping();
if (!\is_callable($mainMapping)) {
$mainMapping = [$this, 'parseRow'];
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 208.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Spaces must be used to indent lines; tabs are not allowed Open
public $customFields = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'typeofdata' => 'V~O',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'map_url' => [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'label' => 'LBL_COUNTRY_CODES',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'url' => 'https://wikipedia.org/wiki/List_of_ISO_3166_country_codes',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
]
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'uitype' => 1,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
throw new \App\Exceptions\AppException('Error with connection |' . $response->getReasonPhrase() . '|' . $response->getBody());
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'typeofdata' => 'V~M'
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public function find($value): array
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$rows = [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
try {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'label' => $row['display_name'],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'localnumber' => $row['address']['local_number'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'maximumlength' => '100',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'format' => 'json',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Line exceeds 120 characters; contains 142 characters Open
throw new \App\Exceptions\AppException('Error with connection |' . $response->getReasonPhrase() . '|' . $response->getBody());
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if ($body) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (isset($row['address']['country_code'], $countryMapping[strtoupper($row['address']['country_code'])])) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'coordinates' => ['lat' => $row['lat'], 'lon' => $row['lon']],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public $docUrl = 'https://nominatim.org/release-docs/develop/';
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'link' => [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'q' => $value,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (200 !== $response->getStatusCode()) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$countryMapping = \Config\Components\AddressFinder::nominatimRemappingForCountry();
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'country_codes' => [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'label' => 'LBL_MAP_URL',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return !empty($this->config['map_url']);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel5' => $row['address']['city'] ?? $row['address']['town'] ?? $row['address']['village'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel6' => $row['address']['hamlet'] ?? $row['address']['suburb'] ?? $row['address']['neighbourhood'] ?? $row['address']['city_district'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'buildingnumber' => $row['address']['house_number'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'tooltip' => 'LBL_COUNTRY_CODES_PLACEHOLDER',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'uitype' => 17,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addressdetails' => 1,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$mainMapping = [$this, 'parseRow'];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
foreach ($body as $row) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
} catch (\Throwable $ex) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
* @return array
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel3' => $row['address']['county'] ?? $row['address']['state_district'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'purifyType' => \App\Purifier::TEXT,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
->request('GET', $url, $options);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
\App\Log::endProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return $rows;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'title' => 'LBL_COUNTRY_CODES_INFO',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'purifyType' => \App\Purifier::URL,
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$mappingFunction = $mainMapping;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$rows[] = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
*
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
private function parseRow(array $row): array
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'company_name_' => $row['address']['office'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'maximumlength' => '200',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (!empty($this->config['country_codes'])) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$options = [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$options = \Config\Components\AddressFinder::$nominatimMapUrlCustomOptions;
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$body = $response->getBody();
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$mappingFunction = $countryMapping[strtoupper($row['address']['country_code'])];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
* Main function to parse information about address.
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (empty($value) || !\App\RequestUtil::isNetConnection()) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$url = $this->config['map_url'] . '?' . http_build_query($params);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel1' => [$row['address']['country'] ?? '', strtoupper($row['address']['country_code'] ?? '')],
- Exclude checks
Line exceeds 120 characters; contains 164 characters Open
'addresslevel6' => $row['address']['hamlet'] ?? $row['address']['suburb'] ?? $row['address']['neighbourhood'] ?? $row['address']['city_district'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel7' => $row['address']['postcode'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
return [];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Line exceeds 120 characters; contains 127 characters Open
if (isset($row['address']['country_code'], $countryMapping[strtoupper($row['address']['country_code'])])) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
*
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
\App\Log::beginProfile("GET|NominatimGeocoder::find|{$url}", __NAMESPACE__);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'address' => \call_user_func_array($mappingFunction, [$row]),
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
\App\Log::error('Error - ' . $ex->getMessage(), __CLASS__);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/**
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params['countrycodes'] = $this->config['country_codes'];
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
*/
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
public function isConfigured()
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
/** {@inheritdoc} */
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (!empty(\Config\Components\AddressFinder::$nominatimMapUrlCustomOptions)) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
}
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel2' => $row['address']['state'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'limit' => \App\Map\Address::getConfig()['global']['result_num'],
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'accept-language' => \App\Language::getLanguage() . ',' . \App\Config::main('default_language') . ',en-US',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$response = (new \GuzzleHttp\Client(\App\RequestHttp::getOptions()))
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$body = \App\Json::isEmpty($body) ? [] : \App\Json::decode($body);
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$mainMapping = \Config\Components\AddressFinder::nominatimRemapping();
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
* @param array $row
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel4' => $row['address']['municipality'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'addresslevel8' => $row['address']['road'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
$params = [
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
if (!\is_callable($mainMapping)) {
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
'countryCode' => $row['address']['country_code'] ?? '',
- Exclude checks
Spaces must be used to indent lines; tabs are not allowed Open
{
- Exclude checks