codenautas/js-to-html

View on GitHub

Showing 164 of 181 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "src": {
        "tags": {
            "audio": {"description": "Address of the resource","value": "Valid non-empty URL potentially surrounded by spaces"},
            "embed": {"description": "Address of the resource","value": "Valid non-empty URL potentially surrounded by spaces"},
            "iframe": {"description": "Address of the resource","value": "Valid non-empty URL potentially surrounded by spaces"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 6 hrs to fix
src/js-to-html.ts on lines 1136..1149
src/js-to-html.ts on lines 1183..1196

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "disabled": {
        "tags": {
            "button": {"description": "Whether the form control is disabled","value": "Boolean attribute"},
            "menuitem": {"description": "Whether the form control is disabled","value": "Boolean attribute"},
            "fieldset": {"description": "Whether the form control is disabled","value": "Boolean attribute"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 6 hrs to fix
src/js-to-html.ts on lines 1183..1196
src/js-to-html.ts on lines 1662..1675

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "form": {
        "tags": {
            "button": {"description": "Associates the control with a form element","value": "ID*"},
            "fieldset": {"description": "Associates the control with a form element","value": "ID*"},
            "input": {"description": "Associates the control with a form element","value": "ID*"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 6 hrs to fix
src/js-to-html.ts on lines 1136..1149
src/js-to-html.ts on lines 1662..1675

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "width": {
        "tags": {
            "canvas": {"description": "Horizontal dimension","value": "Valid non-negative integer"},
            "embed": {"description": "Horizontal dimension","value": "Valid non-negative integer"},
            "iframe": {"description": "Horizontal dimension","value": "Valid non-negative integer"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 4 hrs to fix
src/js-to-html.ts on lines 1239..1250
src/js-to-html.ts on lines 1728..1739

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "title": {
        "tags": {
            "HTML elements": {"description": "Advisory information for the element","value": "Text"},
            "abbr": {"description": "Full term or expansion of abbreviation","value": "Text"},
            "dfn": {"description": "Full term or expansion of abbreviation","value": "Text"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 4 hrs to fix
src/js-to-html.ts on lines 1239..1250
src/js-to-html.ts on lines 1789..1800

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "height": {
        "tags": {
            "canvas": {"description": "Vertical dimension","value": "Valid non-negative integer"},
            "embed": {"description": "Vertical dimension","value": "Valid non-negative integer"},
            "iframe": {"description": "Vertical dimension","value": "Valid non-negative integer"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 4 hrs to fix
src/js-to-html.ts on lines 1728..1739
src/js-to-html.ts on lines 1789..1800

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "crossorigin": {
        "tags": {
            "audio": {"description": "How the element handles crossorigin requests","value": "\"anonymous\"; \"use-credentials\""},
            "img": {"description": "How the element handles crossorigin requests","value": "\"anonymous\"; \"use-credentials\""},
            "link": {"description": "How the element handles crossorigin requests","value": "\"anonymous\"; \"use-credentials\""},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 3 hrs to fix
src/js-to-html.ts on lines 986..995
src/js-to-html.ts on lines 1352..1361

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "autofocus": {
        "tags": {
            "button": {"description": "Automatically focus the form control when the page is loaded","value": "Boolean attribute"},
            "input": {"description": "Automatically focus the form control when the page is loaded","value": "Boolean attribute"},
            "keygen": {"description": "Automatically focus the form control when the page is loaded","value": "Boolean attribute"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 3 hrs to fix
src/js-to-html.ts on lines 1085..1094
src/js-to-html.ts on lines 1352..1361

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    "label": {
        "tags": {
            "menuitem": {"description": "User-visible label","value": "Text"},
            "menu": {"description": "User-visible label","value": "Text"},
            "optgroup": {"description": "User-visible label","value": "Text"},
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 3 hrs to fix
src/js-to-html.ts on lines 986..995
src/js-to-html.ts on lines 1085..1094

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface Attr4HTMLVideoElement extends Attr4HTMLElement {src?:any,crossorigin?:any,poster?:any,preload?:any,autoplay?:any,playsinline?:any,loop?:any,muted?:any,controls?:any,width?:any,height?:any,}
Severity: Major
Found in src/js-to-html.ts and 1 other location - About 2 hrs to fix
src/js-to-html.ts on lines 39..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface Attr4HTMLButtonElement extends Attr4HTMLElement {autofocus?:any,disabled?:any,form?:any,formaction?:any,formenctype?:any,formmethod?:any,formnovalidate?:any,formtarget?:any,name?:any,type?:any,value?:any,}
Severity: Major
Found in src/js-to-html.ts and 1 other location - About 2 hrs to fix
src/js-to-html.ts on lines 96..96

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface Attr4HTMLLinkElement extends Attr4HTMLElement {href?:any,crossorigin?:any,rel?:any,as?:any,media?:any,hreflang?:any,type?:any,sizes?:any,referrerpolicy?:any,integrity?:any,}
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 57..57
src/js-to-html.ts on lines 58..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface Attr4HTMLImageElement extends Attr4HTMLElement {alt?:any,src?:any,srcset?:any,crossorigin?:any,usemap?:any,ismap?:any,width?:any,height?:any,decoding?:any,referrerpolicy?:any,}
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 57..57
src/js-to-html.ts on lines 63..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export interface Attr4HTMLIFrameElement extends Attr4HTMLElement {src?:any,srcdoc?:any,name?:any,sandbox?:any,allowfullscreen?:any,allowpaymentrequest?:any,allowusermedia?:any,width?:any,height?:any,referrerpolicy?:any,}
Severity: Major
Found in src/js-to-html.ts and 2 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 58..58
src/js-to-html.ts on lines 63..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    "href": {
        "tags": {
            "a": {"description": "Address of the hyperlink","value": "Valid URL potentially surrounded by spaces"},
            "area": {"description": "Address of the hyperlink","value": "Valid URL potentially surrounded by spaces"},
            "link": {"description": "Address of the hyperlink","value": "Valid non-empty URL potentially surrounded by spaces"},
Severity: Major
Found in src/js-to-html.ts and 3 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 977..985
src/js-to-html.ts on lines 1023..1031
src/js-to-html.ts on lines 1719..1727

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    "autocomplete": {
        "tags": {
            "form": {"description": "Default setting for autofill feature for controls in the form","value": "\"on\"; \"off\""},
            "input": {"description": "Hint for form autofill feature","value": "Autofill field name and related tokens*"},
            "select": {"description": "Hint for form autofill feature","value": "Autofill field name and related tokens*"},
Severity: Major
Found in src/js-to-html.ts and 3 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 1023..1031
src/js-to-html.ts on lines 1263..1271
src/js-to-html.ts on lines 1719..1727

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    "target": {
        "tags": {
            "a": {"description": "Browsing context for hyperlink navigation","value": "Valid browsing context name or keyword"},
            "area": {"description": "Browsing context for hyperlink navigation","value": "Valid browsing context name or keyword"},
            "base": {"description": "Default browsing context for hyperlink navigation and form submission","value": "Valid browsing context name or keyword"},
Severity: Major
Found in src/js-to-html.ts and 3 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 977..985
src/js-to-html.ts on lines 1023..1031
src/js-to-html.ts on lines 1263..1271

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    "cite": {
        "tags": {
            "blockquote": {"description": "Link to the source of the quotation or more information about the edit","value": "Valid URL potentially surrounded by spaces"},
            "del": {"description": "Link to the source of the quotation or more information about the edit","value": "Valid URL potentially surrounded by spaces"},
            "ins": {"description": "Link to the source of the quotation or more information about the edit","value": "Valid URL potentially surrounded by spaces"},
Severity: Major
Found in src/js-to-html.ts and 3 other locations - About 2 hrs to fix
src/js-to-html.ts on lines 977..985
src/js-to-html.ts on lines 1263..1271
src/js-to-html.ts on lines 1719..1727

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface Attr4HTMLSelectElement extends Attr4HTMLElement {autocomplete?:any,autofocus?:any,disabled?:any,form?:any,multiple?:any,name?:any,required?:any,size?:any,}
Severity: Major
Found in src/js-to-html.ts and 1 other location - About 1 hr to fix
src/js-to-html.ts on lines 69..69

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export interface Attr4HTMLObjectElement extends Attr4HTMLElement {data?:any,type?:any,typemustmatch?:any,name?:any,usemap?:any,form?:any,width?:any,height?:any,}
Severity: Major
Found in src/js-to-html.ts and 1 other location - About 1 hr to fix
src/js-to-html.ts on lines 80..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language