creof/doctrine2-spatial

View on GitHub
lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php

Summary

Maintainability
C
7 hrs
Test Coverage

Function validateArguments has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring.
Open

    protected function validateArguments(array $argv = null)
    {
        $argc = count($argv);

        if (1 == $argc && is_array($argv[0])) {
Severity: Minor
Found in lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php - About 2 hrs to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Method validateArguments has 26 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    protected function validateArguments(array $argv = null)
    {
        $argc = count($argv);

        if (1 == $argc && is_array($argv[0])) {
Severity: Minor
Found in lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php - About 1 hr to fix

Consider simplifying this complex logical expression.
Open

            if ((is_numeric($argv[0]) || is_string($argv[0])) && (is_numeric($argv[1]) || is_string($argv[1])) && (is_numeric($argv[2]) || is_null($argv[2]) || is_string($argv[2]))) {
                return $argv;
            }
Severity: Major
Found in lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php - About 1 hr to fix

The method validateArguments() has an NPath complexity of 1404. The configured NPath complexity threshold is 200.
Open

    protected function validateArguments(array $argv = null)
    {
        $argc = count($argv);

        if (1 == $argc && is_array($argv[0])) {

NPathComplexity

Since: 0.1

The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.

Example

class Foo {
    function bar() {
        // lots of complicated code
    }
}

Source https://phpmd.org/rules/codesize.html#npathcomplexity

The method validateArguments() has a Cyclomatic Complexity of 21. The configured cyclomatic complexity threshold is 10.
Open

    protected function validateArguments(array $argv = null)
    {
        $argc = count($argv);

        if (1 == $argc && is_array($argv[0])) {

CyclomaticComplexity

Since: 0.1

Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.

Example

// Cyclomatic Complexity = 11
class Foo {
1   public function example() {
2       if ($a == $b) {
3           if ($a1 == $b1) {
                fiddle();
4           } elseif ($a2 == $b2) {
                fiddle();
            } else {
                fiddle();
            }
5       } elseif ($c == $d) {
6           while ($c == $d) {
                fiddle();
            }
7        } elseif ($e == $f) {
8           for ($n = 0; $n < $h; $n++) {
                fiddle();
            }
        } else {
            switch ($z) {
9               case 1:
                    fiddle();
                    break;
10              case 2:
                    fiddle();
                    break;
11              case 3:
                    fiddle();
                    break;
                default:
                    fiddle();
                    break;
            }
        }
    }
}

Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity

The method validateArguments uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them.
Open

            } else {
                $value = sprintf('"%s"', $value);
            }

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setX($x)
    {
        $parser = new Parser($x);

        try {
Severity: Major
Found in lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php and 1 other location - About 1 hr to fix
lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php on lines 94..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setY($y)
    {
        $parser = new Parser($y);

        try {
Severity: Major
Found in lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php and 1 other location - About 1 hr to fix
lib/CrEOF/Spatial/PHP/Types/AbstractPoint.php on lines 65..78

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Avoid variables with short names like $y. Configured minimum length is 3.
Open

    protected $y;

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $x. Configured minimum length is 3.
Open

    protected $x;

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $x. Configured minimum length is 3.
Open

    protected function construct($x, $y, $srid = null)

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $y. Configured minimum length is 3.
Open

    public function setY($y)

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $x. Configured minimum length is 3.
Open

    public function setX($x)

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $y. Configured minimum length is 3.
Open

    protected function construct($x, $y, $srid = null)

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Line exceeds 120 characters; contains 147 characters
Open

        throw new InvalidValueException(sprintf('Invalid parameters passed to %s::%s: %s', get_class($this), '__construct', implode(', ', $argv)));

Line exceeds 120 characters; contains 183 characters
Open

            if ((is_numeric($argv[0]) || is_string($argv[0])) && (is_numeric($argv[1]) || is_string($argv[1])) && (is_numeric($argv[2]) || is_null($argv[2]) || is_string($argv[2]))) {

There are no issues that match your filters.

Category
Status