eduardoeof/Gollum

View on GitHub

Showing 148 of 148 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testIsVersionSelectedAlwaysC() {
        do {
            try gollum.registerVersions([GollumABTestAlwaysCVersion.a,
                GollumABTestAlwaysCVersion.b,
                GollumABTestAlwaysCVersion.c])
Severity: Major
Found in Workspace/Gollum/GollumTests/GollumTests.swift and 2 other locations - About 1 hr to fix
Workspace/Gollum/GollumTests/GollumTests.swift on lines 81..93
Workspace/Gollum/GollumTests/GollumTests.swift on lines 95..107

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testIsVersionSelectedAlwaysB() {
        do {
            try gollum.registerVersions([GollumABTestAlwaysBVersion.a,
                                         GollumABTestAlwaysBVersion.b,
                                         GollumABTestAlwaysBVersion.c])
Severity: Major
Found in Workspace/Gollum/GollumTests/GollumTests.swift and 2 other locations - About 1 hr to fix
Workspace/Gollum/GollumTests/GollumTests.swift on lines 81..93
Workspace/Gollum/GollumTests/GollumTests.swift on lines 109..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testIsVersionSelectedAlwaysA() {
        do {
            try gollum.registerVersions([GollumABTestAlwaysAVersion.a,
                                         GollumABTestAlwaysAVersion.b,
                                         GollumABTestAlwaysAVersion.c])
Severity: Major
Found in Workspace/Gollum/GollumTests/GollumTests.swift and 2 other locations - About 1 hr to fix
Workspace/Gollum/GollumTests/GollumTests.swift on lines 95..107
Workspace/Gollum/GollumTests/GollumTests.swift on lines 109..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testInitWithoutProbabilityValue() {
        do {
            version = try Version(value: "A")
        } catch GollumError.versionSyntaxError(let message) {
            XCTAssertEqual(message, "ABTest case expression must have name and probability values splitted by : (e.g. \"MyTestCaseA:0.5\")")
Severity: Major
Found in Workspace/Gollum/GollumTests/VersionTest.swift and 2 other locations - About 50 mins to fix
Workspace/Gollum/GollumTests/VersionTest.swift on lines 66..74
Workspace/Gollum/GollumTests/VersionTest.swift on lines 76..84

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testInitWithoutNameValue() {
        do {
            version = try Version(value: "0.5")
        } catch GollumError.versionSyntaxError(let message) {
            XCTAssertEqual(message, "ABTest case expression must have name and probability values splitted by : (e.g. \"MyTestCaseA:0.5\")")
Severity: Major
Found in Workspace/Gollum/GollumTests/VersionTest.swift and 2 other locations - About 50 mins to fix
Workspace/Gollum/GollumTests/VersionTest.swift on lines 56..64
Workspace/Gollum/GollumTests/VersionTest.swift on lines 76..84

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    func testInitWithProbabilityNotFloatValue() {
        do {
            version = try Version(value: "A:A")
        } catch GollumError.versionSyntaxError(let message) {
            XCTAssertEqual(message, "ABTest must have a probablity (e.g. 0.5)")
Severity: Major
Found in Workspace/Gollum/GollumTests/VersionTest.swift and 2 other locations - About 50 mins to fix
Workspace/Gollum/GollumTests/VersionTest.swift on lines 56..64
Workspace/Gollum/GollumTests/VersionTest.swift on lines 66..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 59.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    func testInitWithUnicodeScalarLiteralTypeValue() {
        version = Version(unicodeScalarLiteral: "A:0.3")
        
        XCTAssertEqual(version.name, "A")
        XCTAssertEqual(version.probability, 0.3)
Severity: Minor
Found in Workspace/Gollum/GollumTests/VersionTest.swift and 1 other location - About 30 mins to fix
Workspace/Gollum/GollumTests/VersionTest.swift on lines 29..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 41.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    func testInitWithExtendedGraphemeClusterLiteralTypeValue() {
        version = Version(extendedGraphemeClusterLiteral: "A:0.4")
        
        XCTAssertEqual(version.name, "A")
        XCTAssertEqual(version.probability, 0.4)
Severity: Minor
Found in Workspace/Gollum/GollumTests/VersionTest.swift and 1 other location - About 30 mins to fix
Workspace/Gollum/GollumTests/VersionTest.swift on lines 36..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 41.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function should have at least one blank line after it
Open

    }

function-whitespace

Every function and method declaration should have one blank line before and after itself. An exception to this rule are functions that are declared at the start of a file (only need one blank line after their declaration) or at the end of a file (only need one blank line before their declaration). Comments immediately before a function declaration (no blank lines between them and the function) are considered to be part of the declaration.

Preferred

func function1() {
  var text = 1
  var text = 2
}

function1()

// a comment
func function2() {
  // something goes here
}

struct SomeStruct {

  func function3() {
    // something goes here
  }

  func function4() {
    // something else goes here
  };

}

func function5() {
  // something goes here
}

Not Preferred

func function1() {
  var text = 1
  var text = 2
}
function1()
// a comment
func function2() {
  // something goes here
}

struct SomeStruct {
  func function3() {
    // something goes here
  }

  func function4() {
    // something else goes here
  };
}
func function5() {
  // something goes here
}

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

        

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

            
Severity: Minor
Found in Gollum/Gollum.swift by tailor

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

        
Severity: Minor
Found in Gollum/model/Version.swift by tailor

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬

Line should not have any trailing whitespace
Open

    

trailing-whitespace

Flag whitespace after the last non-whitespace character on each line until the newline.

Preferred

let number = 42¬

Not Preferred

let number = 42••¬
Severity
Category
Status
Source
Language