Showing 241 of 4,939 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            $shared_binary_ops = [
                flags\BINARY_BITWISE_OR => 'BINARY_BITWISE_OR',
                flags\BINARY_BITWISE_AND => 'BINARY_BITWISE_AND',
                flags\BINARY_BITWISE_XOR => 'BINARY_BITWISE_XOR',
                flags\BINARY_CONCAT => 'BINARY_CONCAT',
Severity: Major
Found in src/Phan/Debug.php and 1 other location - About 1 hr to fix
.phan/plugins/DuplicateExpressionPlugin.php on lines 195..209

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private const ASSIGN_OP_FLAGS = [
        flags\BINARY_BITWISE_OR => '|',
        flags\BINARY_BITWISE_AND => '&',
        flags\BINARY_BITWISE_XOR => '^',
        flags\BINARY_CONCAT => '.',
Severity: Major
Found in .phan/plugins/DuplicateExpressionPlugin.php and 1 other location - About 1 hr to fix
src/Phan/Debug.php on lines 351..365

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($parameter_list as $i => $parameter) {
            $old_type = $parameter->getNonVariadicUnionType();
            $type = $old_type->withSelfResolvedInContext($context);
            if ($type->hasStaticType()) {
                $type = $type->withType($this->getFQSEN()->asType());
Severity: Major
Found in src/Phan/Language/Element/Clazz.php and 1 other location - About 1 hr to fix
src/Phan/Language/Element/Clazz.php on lines 2819..2831

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($right_node instanceof Node) {
            $right_context = $this->analyzeAndGetUpdatedContext($context_with_left_condition, $node, $right_node);
            if ($right_node->kind === ast\AST_THROW) {
                return $this->postOrderAnalyze($context_with_false_left_condition, $node);
            }
Severity: Major
Found in src/Phan/BlockAnalysisVisitor.php and 1 other location - About 1 hr to fix
src/Phan/BlockAnalysisVisitor.php on lines 2719..2734

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($right_node instanceof Node) {
            $right_context = $this->analyzeAndGetUpdatedContext($context_with_false_left_condition, $node, $right_node);
            if ($right_node->kind === ast\AST_THROW) {
                return $this->postOrderAnalyze($context_with_true_left_condition, $node);
            }
Severity: Major
Found in src/Phan/BlockAnalysisVisitor.php and 1 other location - About 1 hr to fix
src/Phan/BlockAnalysisVisitor.php on lines 2650..2664

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            self::analyzeNodeUnionTypeCast(
                $args[$argcount - 1],
                $context,
                $code_base,
                CallableType::instance(false)->asPHPDocUnionType(),
Severity: Major
Found in src/Phan/Plugin/Internal/MiscParamPlugin.php and 2 other locations - About 1 hr to fix
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 602..618
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 620..636

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            self::analyzeNodeUnionTypeCast(
                $args[$argcount - 2],
                $context,
                $code_base,
                CallableType::instance(false)->asPHPDocUnionType(),
Severity: Major
Found in src/Phan/Plugin/Internal/MiscParamPlugin.php and 2 other locations - About 1 hr to fix
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 406..422
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 602..618

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            self::analyzeNodeUnionTypeCast(
                $args[$argcount - 1],
                $context,
                $code_base,
                CallableType::instance(false)->asPHPDocUnionType(),
Severity: Major
Found in src/Phan/Plugin/Internal/MiscParamPlugin.php and 2 other locations - About 1 hr to fix
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 406..422
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 620..636

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($parameter->isPassByReference() != $o_parameter->isPassByReference()) {
                $is_reference = $parameter->isPassByReference();
                self::emitSignatureRealMismatchIssue(
                    $code_base,
                    $method,
Severity: Major
Found in src/Phan/Analysis/ParameterTypesAnalyzer.php and 1 other location - About 1 hr to fix
src/Phan/Analysis/ParameterTypesAnalyzer.php on lines 881..894

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($file_list as $path_to_stub) {
            fwrite(STDERR, "Loading stub $path_to_stub\n");
            try {
                Analysis::parseFile($code_base, $path_to_stub, false, null, /* is_php_internal_stub = false, so that we actually parse phpdoc */ false);
            } catch (Exception $e) {
Severity: Major
Found in internal/lib/IncompatibleRealStubsSignatureDetector.php and 1 other location - About 1 hr to fix
internal/lib/IncompatibleStubsSignatureDetector.php on lines 156..164

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    $result = ($can_cast[1] = ($can_cast[1] ?? $assign_type->hasTypeMatchingCallback(static function (Type $other_type): bool {
                        if (!$other_type instanceof ArrayType) {
                            return false;
                        }
                        if ($other_type instanceof AssociativeArrayType) {
Severity: Major
Found in src/Phan/Analysis/AssignmentVisitor.php and 1 other location - About 1 hr to fix
src/Phan/Analysis/AssignmentVisitor.php on lines 1908..1920

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($parameter->isVariadic() != $o_parameter->isVariadic()) {
                $is_variadic = $parameter->isVariadic();
                self::emitSignatureRealMismatchIssue(
                    $code_base,
                    $method,
Severity: Major
Found in src/Phan/Analysis/ParameterTypesAnalyzer.php and 1 other location - About 1 hr to fix
src/Phan/Analysis/ParameterTypesAnalyzer.php on lines 864..877

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    $result = ($can_cast[0] = ($can_cast[0] ?? $assign_type->hasTypeMatchingCallback(static function (Type $other_type): bool {
                        if (!$other_type instanceof ArrayType) {
                            return false;
                        }
                        if ($other_type instanceof ListType) {
Severity: Major
Found in src/Phan/Analysis/AssignmentVisitor.php and 1 other location - About 1 hr to fix
src/Phan/Analysis/AssignmentVisitor.php on lines 1926..1938

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($file_list as $path_to_stub) {
            fwrite(STDERR, "Loading stub $path_to_stub\n");
            try {
                Analysis::parseFile($code_base, $path_to_stub, false, null, /* is_php_internal_stub = false, so that we actually parse phpdoc */ false);
            } catch (Exception $e) {
Severity: Major
Found in internal/lib/IncompatibleStubsSignatureDetector.php and 1 other location - About 1 hr to fix
internal/lib/IncompatibleRealStubsSignatureDetector.php on lines 167..175

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            } elseif (self::isRegularArray($parameter->getUnionType())) {
                $warning_closures[$i] = static function () use ($code_base, $parameter, $method, $i, &$inferred_types): void {
                    $suggestion = self::suggestionFromUnionTypeNotRegularArray($inferred_types[$i] ?? null);
                    self::emitIssueAndSuggestion(
                        $code_base,
Severity: Major
Found in .phan/plugins/UnknownElementTypePlugin.php and 1 other location - About 1 hr to fix
.phan/plugins/UnknownElementTypePlugin.php on lines 80..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $in_array_callback = static function (
            CodeBase $code_base,
            Context $context,
            FunctionInterface $unused_function,
            array $args,
Severity: Major
Found in src/Phan/Plugin/Internal/MiscParamPlugin.php and 1 other location - About 1 hr to fix
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 1152..1166

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $array_key_exists_callback = static function (
            CodeBase $code_base,
            Context $context,
            FunctionInterface $unused_function,
            array $args,
Severity: Major
Found in src/Phan/Plugin/Internal/MiscParamPlugin.php and 1 other location - About 1 hr to fix
src/Phan/Plugin/Internal/MiscParamPlugin.php on lines 1134..1148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($parameter->getUnionType()->isEmpty()) {
                $warning_closures[$i] = static function () use ($code_base, $parameter, $method, $i, &$inferred_types): void {
                    $suggestion = self::suggestionFromUnionType($inferred_types[$i] ?? null);
                    self::emitIssueAndSuggestion(
                        $code_base,
Severity: Major
Found in .phan/plugins/UnknownElementTypePlugin.php and 1 other location - About 1 hr to fix
.phan/plugins/UnknownElementTypePlugin.php on lines 92..104

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    'domdocument' => [
        'actualEncoding' => 'string',
        'config' => 'DOMConfiguration',
        'doctype' => 'DOMDocumentType',
        'documentElement' => 'DOMElement',
Severity: Major
Found in src/Phan/Language/Internal/PropertyMap.php and 1 other location - About 1 hr to fix
src/Phan/Language/Internal/PropertyMap.php on lines 274..294

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    'mysqli' => [
        'affected_rows' => 'int',
        'client_info' => 'string',
        'client_version' => 'int',
        'connect_errno' => 'int',
Severity: Major
Found in src/Phan/Language/Internal/PropertyMap.php and 1 other location - About 1 hr to fix
src/Phan/Language/Internal/PropertyMap.php on lines 150..170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language