Sign upLogin

grafana/grafana-polystat-panel

View on GitHub
Star

Showing 34 of 189 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  const arrayMove = (arr: any, oldIndex: number, newIndex: number) => {
    if (newIndex >= arr.length) {
      let k = newIndex - arr.length + 1;
      while (k--) {
        arr.push(undefined);
Severity: Major
Found in src/components/overrides/OverrideEditor.tsx and 1 other location - About 3 hrs to fix
src/components/composites/CompositeEditor.tsx on lines 77..85

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          <Field label="Stat" description="The statistic to be displayed" disabled={!override.enabled}>
            <Select
              menuShouldPortal={true}
              value={operatorName}
              onChange={(v) => {
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 1 other location - About 3 hrs to fix
src/components/composites/CompositeItem.tsx on lines 153..167

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 104.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          <Field label="Open URL in New Tab" description="Open link in new tab" disabled={!override.enabled}>
            <Switch
              transparent={false}
              value={override.clickThroughOpenNewTab}
              disabled={!override.enabled}
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 3 other locations - About 3 hrs to fix
src/components/composites/CompositeItem.tsx on lines 105..112
src/components/composites/CompositeItem.tsx on lines 141..152
src/components/composites/CompositeItem.tsx on lines 183..190

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          <Field label="Sanitize URL" description="Sanitize URL before evaluating" disabled={!override.enabled}>
            <Switch
              transparent={false}
              disabled={!override.enabled}
              value={override.clickThroughSanitize}
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 1 other location - About 3 hrs to fix
src/components/composites/CompositeItem.tsx on lines 175..182

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  if (mappingType === 1) {
    for (let i = 0; i < panel.valueMaps.length; i++) {
      const map = panel.valueMaps[i];
      mappings.push(
        upgradeOldAngularValueMapping(
Severity: Major
Found in src/data/valueMappingsWrapper/v8/valueMappings.ts and 1 other location - About 3 hrs to fix
src/data/valueMappingsWrapper/v8/valueMappings.ts on lines 244..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  } else if (mappingType === 2) {
    for (let i = 0; i < panel.rangeMaps.length; i++) {
      const map = panel.rangeMaps[i];
      mappings.push(
        upgradeOldAngularValueMapping(
Severity: Major
Found in src/data/valueMappingsWrapper/v8/valueMappings.ts and 1 other location - About 3 hrs to fix
src/data/valueMappingsWrapper/v8/valueMappings.ts on lines 230..258

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

          <Field label="Suffix" description="Apply text to end of metric" disabled={!override.enabled}>
            <Input
              value={override.suffix}
              placeholder=""
              onChange={(e) => setOverride({ ...override, suffix: e.currentTarget.value })}
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 5 other locations - About 2 hrs to fix
src/components/overrides/OverrideItem.tsx on lines 82..92
src/components/overrides/OverrideItem.tsx on lines 171..177
src/components/overrides/OverrideItem.tsx on lines 185..191
src/components/composites/CompositeItem.tsx on lines 90..96
src/components/composites/CompositeItem.tsx on lines 168..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

          <Field label="Clickthrough URL" description="URL to Open on Click" disabled={!override.enabled}>
            <Input
              value={override.clickThrough}
              placeholder="https://"
              onChange={(e) => setOverride({ ...override, clickThrough: e.currentTarget.value })}
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 5 other locations - About 2 hrs to fix
src/components/overrides/OverrideItem.tsx on lines 82..92
src/components/overrides/OverrideItem.tsx on lines 171..177
src/components/overrides/OverrideItem.tsx on lines 178..184
src/components/composites/CompositeItem.tsx on lines 90..96
src/components/composites/CompositeItem.tsx on lines 168..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

          <Field
            label="Label"
            description="Sets the name of the override in the configuration editor."
            disabled={!override.enabled}
          >
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 5 other locations - About 2 hrs to fix
src/components/overrides/OverrideItem.tsx on lines 171..177
src/components/overrides/OverrideItem.tsx on lines 178..184
src/components/overrides/OverrideItem.tsx on lines 185..191
src/components/composites/CompositeItem.tsx on lines 90..96
src/components/composites/CompositeItem.tsx on lines 168..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

          <Field label="Prefix" description="Apply text to beginning of metric" disabled={!override.enabled}>
            <Input
              value={override.prefix}
              placeholder=""
              onChange={(e) => setOverride({ ...override, prefix: e.currentTarget.value })}
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 5 other locations - About 2 hrs to fix
src/components/overrides/OverrideItem.tsx on lines 82..92
src/components/overrides/OverrideItem.tsx on lines 178..184
src/components/overrides/OverrideItem.tsx on lines 185..191
src/components/composites/CompositeItem.tsx on lines 90..96
src/components/composites/CompositeItem.tsx on lines 168..174

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 91.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const numericalFrameA = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: '02', type: FieldType.number, values: [200, 210, 220], config: field },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 1 other location - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 66..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const casedFrameA = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: 'series-a1', type: FieldType.number, values: [200, 210, 220], config: field },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 1 other location - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 39..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  const getOperator = (operatorName: string) => {
    const keys = OperatorOptions.keys();
    for (const aKey of keys) {
      if (OperatorOptions[aKey].value === operatorName) {
        return OperatorOptions[aKey];
Severity: Major
Found in src/components/overrides/OverrideItem.tsx and 1 other location - About 2 hrs to fix
src/components/composites/CompositeItem.tsx on lines 12..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const numericalFrameB = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: '03', type: FieldType.number, values: [500, 510, 520] },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 4 other locations - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 28..33
src/__mocks__/models/models.ts on lines 55..60
src/__mocks__/models/models.ts on lines 74..79
src/__mocks__/models/models.ts on lines 82..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const frameC = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: 'C-series01', type: FieldType.number, values: [333, 444, 555] },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 4 other locations - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 47..52
src/__mocks__/models/models.ts on lines 55..60
src/__mocks__/models/models.ts on lines 74..79
src/__mocks__/models/models.ts on lines 82..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const numericalFrameC = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: '01', type: FieldType.number, values: [333, 444, 555] },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 4 other locations - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 28..33
src/__mocks__/models/models.ts on lines 47..52
src/__mocks__/models/models.ts on lines 74..79
src/__mocks__/models/models.ts on lines 82..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const casedFrameC = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: 'series-A2', type: FieldType.number, values: [333, 444, 555] },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 4 other locations - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 28..33
src/__mocks__/models/models.ts on lines 47..52
src/__mocks__/models/models.ts on lines 55..60
src/__mocks__/models/models.ts on lines 74..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

const casedFrameB = toDataFrame({
  fields: [
    { name: 'time', type: FieldType.time, values: [time, time + 1, time + 2] },
    { name: 'series-a3', type: FieldType.number, values: [500, 510, 520] },
  ],
Severity: Major
Found in src/__mocks__/models/models.ts and 4 other locations - About 2 hrs to fix
src/__mocks__/models/models.ts on lines 28..33
src/__mocks__/models/models.ts on lines 47..52
src/__mocks__/models/models.ts on lines 55..60
src/__mocks__/models/models.ts on lines 82..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

const InlineSVG = ({ src }: { src: string }) => {
  // testId will be the file name without extension (e.g. `public/img/icons/angle-double-down.svg` -> `angle-double-down`)
  const testId = src.replace(SVG_FILE_NAME_REGEX, '$2');
  return <svg xmlns="http://www.w3.org/2000/svg" data-testid={testId} viewBox="0 0 24 24" />;
};
Severity: Major
Found in .config/jest/mocks/react-inlinesvg.tsx and 1 other location - About 2 hrs to fix
.config/mocks/react-inlinesvg.tsx on lines 19..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

const InlineSVG = ({ src }: { src: string }) => {
  // testId will be the file name without extension (e.g. `public/img/icons/angle-double-down.svg` -> `angle-double-down`)
  const testId = src.replace(SVG_FILE_NAME_REGEX, '$2');
  return <svg xmlns="http://www.w3.org/2000/svg" data-testid={testId} viewBox="0 0 24 24" />;
};
Severity: Major
Found in .config/mocks/react-inlinesvg.tsx and 1 other location - About 2 hrs to fix
.config/jest/mocks/react-inlinesvg.tsx on lines 19..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language