h2non/riprova

View on GitHub

Showing 14 of 14 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in examples/exponential_backoff.py and 1 other location - About 5 hrs to fix
examples/constant_backoff.py on lines 0..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in examples/constant_backoff.py and 1 other location - About 5 hrs to fix
examples/exponential_backoff.py on lines 0..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

@riprova.retry(error_evaluator=error_evaluator)
def mul2(x):
    global calls

    if calls < 3:
Severity: Major
Found in examples/blacklisting_errors.py and 1 other location - About 4 hrs to fix
examples/whitelisting_errors.py on lines 38..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

@riprova.retry(error_evaluator=error_evaluator)
def mul2(x):
    global calls

    if calls < 3:
Severity: Major
Found in examples/whitelisting_errors.py and 1 other location - About 4 hrs to fix
examples/blacklisting_errors.py on lines 36..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function __init__ has 7 arguments (exceeds 4 allowed). Consider refactoring.
Open

    def __init__(self,
Severity: Major
Found in riprova/async_retrier.py - About 50 mins to fix

    Function __init__ has 6 arguments (exceeds 4 allowed). Consider refactoring.
    Open

        def __init__(self,
    Severity: Minor
    Found in riprova/retrier.py - About 45 mins to fix

      Function retry has 6 arguments (exceeds 4 allowed). Consider refactoring.
      Open

      def retry(timeout=0, backoff=None, evaluator=None,
      Severity: Minor
      Found in riprova/retry.py - About 45 mins to fix

        Function retry has a Cognitive Complexity of 8 (exceeds 5 allowed). Consider refactoring.
        Open

        def retry(timeout=0, backoff=None, evaluator=None,
                  error_evaluator=None, on_retry=None, **kw):
            """
            Decorator function that wraps function, method or coroutine function that
            would be retried on failure capabilities.
        Severity: Minor
        Found in riprova/retry.py - About 45 mins to fix

        Cognitive Complexity

        Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

        A method's cognitive complexity is based on a few simple rules:

        • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
        • Code is considered more complex for each "break in the linear flow of the code"
        • Code is considered more complex when "flow breaking structures are nested"

        Further reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

        try:
            mul2(2)
        except Exception as err:
            print('Blacklisted error: {}'.format(err))
            print('Retry attempts: {}'.format(calls))
        Severity: Minor
        Found in examples/blacklisting_errors.py and 1 other location - About 40 mins to fix
        examples/whitelisting_errors.py on lines 54..58

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 34.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Similar blocks of code found in 2 locations. Consider refactoring.
        Open

        try:
            mul2(2)
        except ReferenceError as err:
            print('Whitelisted error: {}'.format(err))
            print('Retry attempts: {}'.format(calls))
        Severity: Minor
        Found in examples/whitelisting_errors.py and 1 other location - About 40 mins to fix
        examples/blacklisting_errors.py on lines 52..56

        Duplicated Code

        Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

        Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

        When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

        Tuning

        This issue has a mass of 34.

        We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

        The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

        If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

        See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

        Refactorings

        Further Reading

        Function __init__ has 5 arguments (exceeds 4 allowed). Consider refactoring.
        Open

            def __init__(self,
        Severity: Minor
        Found in riprova/strategies/exponential.py - About 35 mins to fix

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          with retrier as retry:
              calls = 0
              result = retry.run(mul2, 8)
              print('Result 3: {}'.format(result))
          Severity: Minor
          Found in examples/context_manager.py and 1 other location - About 30 mins to fix
          examples/context_manager.py on lines 29..32

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 32.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          with retrier as retry:
              calls = 0
              result = retry.run(mul2, 4)
              print('Result 2: {}'.format(result))
          Severity: Minor
          Found in examples/context_manager.py and 1 other location - About 30 mins to fix
          examples/context_manager.py on lines 34..37

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 32.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Avoid too many return statements within this function.
          Open

                  return err
          Severity: Major
          Found in riprova/retrier.py - About 30 mins to fix
            Severity
            Category
            Status
            Source
            Language