Sign upLogin

hackedteam/core-blackberry

View on GitHub
Star

Showing 1,089 of 2,662 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public void decrypt(final byte[] ct, final byte[] pt) {
        /*
         * map byte array block to cipher state and add initial round key:
         */
        int k = 0, v;
Severity: Major
Found in RCSBlackBerry/src/blackberry/crypto/Rijndael.java and 1 other location - About 2 days to fix
RCSBlackBerry/src/blackberry/crypto/Rijndael.java on lines 327..388

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 1363.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public void encrypt(final byte[] pt, final byte[] ct) {
        /*
         * map byte array block to cipher state and add initial round key:
         */
        int k = 0, v;
Severity: Major
Found in RCSBlackBerry/src/blackberry/crypto/Rijndael.java and 1 other location - About 2 days to fix
RCSBlackBerry/src/blackberry/crypto/Rijndael.java on lines 204..265

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 1363.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

//#preprocessor
package blackberry.utils;

import java.util.Vector;
Severity: Major
Found in InjectionFramework/src/blackberry/utils/StringUtils.java and 1 other location - About 2 days to fix
RCSBlackBerry/src/blackberry/utils/StringUtils.java on lines 1..310

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 1099.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

//#preprocess

/* *************************************************
 * Copyright (c) 2010 - 2012
 * HT srl,   All rights reserved.
Severity: Major
Found in RCSBlackBerry/src/blackberry/utils/StringUtils.java and 1 other location - About 2 days to fix
InjectionFramework/src/blackberry/utils/StringUtils.java on lines 1..302

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 1099.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private static final int[] STACK_POP_COUNTS = new int[]
    {
        0, // nop
        0, // aconst_null
        0, // iconst_m1
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java and 1 other location - About 6 hrs to fix
bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 453..657

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 414.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private static final int[] STACK_PUSH_COUNTS = new int[]
    {
        0, // nop
        1, // aconst_null
        1, // iconst_m1
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java and 1 other location - About 6 hrs to fix
bb-tools/proguard4.7/src/proguard/classfile/instruction/Instruction.java on lines 244..448

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 414.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static boolean walk(String[] menus, Screen screen, boolean simple) {
        //#ifdef DEBUGWALK
        final Debug debug = new Debug("walk", DebugLevel.VERBOSE);
        debug.trace("walk, active screen:" + UiApplication.getUiApplication().getActiveScreen() + " Screen: " + screen);
Severity: Major
Found in InjectionFramework/src/blackberry/injection/MenuWalker.java and 1 other location - About 6 hrs to fix
RCSBlackBerry/src/blackberry/injection/MenuWalker.java on lines 56..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 413.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static boolean walk(String[] menus, Screen screen, boolean simple) {
        //#ifdef DEBUGWALK
        final Debug debug = new Debug("walk", DebugLevel.VERBOSE);
        debug.trace("walk, active screen:"
                + UiApplication.getUiApplication().getActiveScreen()
Severity: Major
Found in RCSBlackBerry/src/blackberry/injection/MenuWalker.java and 1 other location - About 6 hrs to fix
InjectionFramework/src/blackberry/injection/MenuWalker.java on lines 35..120

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 413.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

package blackberry.injection;

import net.rim.device.api.system.Application;
import net.rim.device.api.system.EventInjector;
import net.rim.device.api.system.EventInjector.KeyCodeEvent;
Severity: Major
Found in InjectionFramework/src/blackberry/injection/KeyInjector.java and 1 other location - About 6 hrs to fix
RCSBlackBerry/src/blackberry/injection/KeyInjector.java on lines 1..137

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 384.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

//#preprocess

/* *************************************************
 * Copyright (c) 2010 - 2012
 * HT srl,   All rights reserved.
Severity: Major
Found in RCSBlackBerry/src/blackberry/injection/KeyInjector.java and 1 other location - About 6 hrs to fix
InjectionFramework/src/blackberry/injection/KeyInjector.java on lines 1..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 384.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/DoubleValue.java and 1 other location - About 6 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/FloatValue.java on lines 1..359

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 379.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/FloatValue.java and 1 other location - About 6 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/DoubleValue.java on lines 1..359

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 379.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/SpecificDoubleValue.java and 1 other location - About 5 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/SpecificFloatValue.java on lines 1..186

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 359.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/SpecificFloatValue.java and 1 other location - About 5 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/SpecificDoubleValue.java on lines 1..186

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 359.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static boolean walk(String menuItemText, Screen screen, boolean simple) {
        final Debug debug = new Debug("walk", DebugLevel.INFORMATION);

        debug.trace("walk: " + menuItemText + " screen: " + screen);
        boolean ret = false;
Severity: Major
Found in InjectionFramework/src/blackberry/injection/MenuWalker.java and 1 other location - About 5 hrs to fix
BBMInjectDemo/src/com/rim/samples/device/bbminjectdemo/MenuWalker.java on lines 32..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 321.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    static boolean walk(String menuItemText, Screen screen, boolean simple) {
        final Debug debug = new Debug("walk", DebugLevel.INFORMATION);

        debug.trace("walk: " + menuItemText + " screen: " + screen);
        boolean ret = false;
Severity: Major
Found in BBMInjectDemo/src/com/rim/samples/device/bbminjectdemo/MenuWalker.java and 1 other location - About 5 hrs to fix
InjectionFramework/src/blackberry/injection/MenuWalker.java on lines 122..182

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 321.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                do
                {
                    if (isBranchOrExceptionTarget(offset))
                    {
                        System.out.println("Branch target from ["+branchOriginValues[offset]+"]:");
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/optimize/evaluation/PartialEvaluator.java and 1 other location - About 3 hrs to fix
bb-tools/proguard4.7/src/proguard/optimize/evaluation/PartialEvaluator.java on lines 277..313

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 246.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            do
            {
                if (isBranchOrExceptionTarget(offset))
                {
                    System.out.println("Branch target from ["+branchOriginValues[offset]+"]:");
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/optimize/evaluation/PartialEvaluator.java and 1 other location - About 3 hrs to fix
bb-tools/proguard4.7/src/proguard/optimize/evaluation/PartialEvaluator.java on lines 197..233

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 246.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/CompositeLongValue.java and 1 other location - About 3 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/CompositeIntegerValue.java on lines 1..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 235.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

/*
 * ProGuard -- shrinking, optimization, obfuscation, and preverification
 *             of Java bytecode.
 *
 * Copyright (c) 2002-2011 Eric Lafortune (eric@graphics.cornell.edu)
Severity: Major
Found in bb-tools/proguard4.7/src/proguard/evaluation/value/CompositeIntegerValue.java and 1 other location - About 3 hrs to fix
bb-tools/proguard4.7/src/proguard/evaluation/value/CompositeLongValue.java on lines 1..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 235.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language