hackedteam/fuzzer-windows

View on GitHub

Showing 193 of 193 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def install_hooks(pydbg, image_addr, calls_name, offset, calls_n):
    # set a breakpoint in each entry of the interface and update the name dictionary
    for i in range(0, calls_n):
        # Ignore addref, queryInterface and release
        if i < 3:
Severity: Major
Found in ie_sandbox/broker_trace/broker_tracer.py and 1 other location - About 6 hrs to fix
ie_sandbox/broker_trace/ieuser_tracer.py on lines 173..180

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                elif self.weHaveATwoByTwo():
                    self.xscale      = unpack('>h', handle.read(2) )[0]
                    self.scale01     = unpack('>h', handle.read(2) )[0]
                    self.scale10     = unpack('>h', handle.read(2) )[0]
                    self.yscale      = unpack('>h', handle.read(2) )[0]
Severity: Major
Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
fontfuzzer/parsers/TTF.py on lines 2242..2247

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def __init__(self, handle):

            self.bCharSet = unpack('>B', handle.read(1) )[0]
            self.xRatio = unpack('>B', handle.read(1) )[0]
            self.yStartRatio = unpack('>B', handle.read(1) )[0]
Severity: Major
Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
fontfuzzer/parsers/TTF.py on lines 1544..1548

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if i.nameId == FONT_SPECIFIER_FAMILY_ID:
                offset = name.offsetWithinFile + name.offsetToStartOfStringStorage + i.stringOffsetFromStartOfStorage
                f.seek(offset)
                family = unpack('>{}s'.format(i.stringLength), f.read(i.stringLength))[0]
            
Severity: Major
Found in fontfuzzer/fuzzers/native_glyf.py and 1 other location - About 5 hrs to fix
fontfuzzer/fuzzers/native_glyf.py on lines 57..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            elif i.nameId == FONT_SPECIFIER_NAME_ID:
                offset = name.offsetWithinFile + name.offsetToStartOfStringStorage + i.stringOffsetFromStartOfStorage
                f.seek(offset)
                name = unpack('>{}s'.format(i.stringLength), f.read(i.stringLength))[0]
            
Severity: Major
Found in fontfuzzer/fuzzers/native_glyf.py and 1 other location - About 5 hrs to fix
fontfuzzer/fuzzers/native_glyf.py on lines 48..55

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File hostagent.py has 391 lines of code (exceeds 250 allowed). Consider refactoring.
Open

#!/usr/bin/env python

import os
import imp
import sys
Severity: Minor
Found in fontfuzzer/hostagent.py - About 5 hrs to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                for i in range(0, len(self.glyphFlags) ):
    
                    if self.glyphFlags[i].isYshortVectorSet():
                        self.yCoordinates.append( unpack('>B', handle.read(1)) [0] )
                    else:
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 1677..1682

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 90.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

                for i in range(0, len(self.glyphFlags) ):
    
                    if self.glyphFlags[i].isXshortVectorSet():
                        self.xCoordinates.append( unpack('>B', handle.read(1)) [0] )
                    else:
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 1685..1690

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 90.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            print "%x:%x:%x:%x:%x:%x:%x:%x:%x:%x:%x" %(g2[0],g2[1],g2[2],g2[3],g2[4],g2[5],g2[6],g2[7],g2[8],g2[9],g2[10])
    Severity: Major
    Found in ie_sandbox/broker_trace/ieuser_tracer.py and 1 other location - About 5 hrs to fix
    ie_sandbox/broker_trace/ieuser_tracer.py on lines 108..108

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 87.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            print "%x:%x:%x:%x:%x:%x:%x:%x:%x:%x:%x" %(g1[0],g1[1],g1[2],g1[3],g1[4],g1[5],g1[6],g1[7],g1[8],g1[9],g1[10])
    Severity: Major
    Found in ie_sandbox/broker_trace/ieuser_tracer.py and 1 other location - About 5 hrs to fix
    ie_sandbox/broker_trace/ieuser_tracer.py on lines 109..109

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 87.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            for d in dirToPlainCopy:
    
                offset = self.fontTableDirectories[d].offset
                tmpLength = self.fontTableDirectories[d].length
    
    
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 402..411

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 86.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            for d in dirToRebase:
                offset = self.fontTableDirectories[d].offset
                length = self.fontTableDirectories[d].length
    
    
    
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 5 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 324..334

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 86.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            fname = 'testcases//' + \
                os.path.basename(self.filename).split('.ttf')[0] + \
                '-' + \
                ''.join( random.choice(string.ascii_lowercase + string.digits) for x in range(8) ) + \
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 4 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 679..682

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            fname = 'testcases//' + \
                os.path.basename(self.filename).split('.ttf')[0] + \
                '-' + \
                ''.join( random.choice(string.ascii_lowercase + string.digits) for x in range(8) ) + \
    Severity: Major
    Found in fontfuzzer/parsers/TTF.py and 1 other location - About 4 hrs to fix
    fontfuzzer/parsers/TTF.py on lines 542..545

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 85.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        def get(self, uri):
            uriFields = uri.split('/')
            
            # show list of available nodes
            if uri == '':
    Severity: Major
    Found in fontfuzzer/serveragent.py and 1 other location - About 4 hrs to fix
    fontfuzzer/serveragent.py on lines 256..274

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 78.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    class ServerResultsHandler(tornado.web.RequestHandler):
    
    
        
        def get(self, uri):
    Severity: Major
    Found in fontfuzzer/serveragent.py and 1 other location - About 4 hrs to fix
    fontfuzzer/serveragent.py on lines 203..217

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 78.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    _STARTUPINFOA._fields_ = [
        # C:/PROGRA~1/MICROS~2/VC98/Include/winbase.h 3774
        ('cb', DWORD),
        ('lpReserved', LPSTR),
        ('lpDesktop', LPSTR),
    Severity: Major
    Found in ie_sandbox/broker_trace/windows_h.py and 1 other location - About 4 hrs to fix
    ie_sandbox/grayhat/my_debugger_defines.py on lines 79..97

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        _fields_ = [
            ("cb",            DWORD),        
            ("lpReserved",    LPTSTR), 
            ("lpDesktop",     LPTSTR),  
            ("lpTitle",       LPTSTR),
    Severity: Major
    Found in ie_sandbox/grayhat/my_debugger_defines.py and 1 other location - About 4 hrs to fix
    ie_sandbox/broker_trace/windows_h.py on lines 207..226

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File native_glyf.py has 334 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    #!/usr/bin/env python
    
    # awful
    import sys
    sys.path.append('../')
    Severity: Minor
    Found in fontfuzzer/fuzzers/native_glyf.py - About 4 hrs to fix

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      if __name__ == '__main__':
      
      
          if len(sys.argv) == 2 and sys.argv[1] == 'setup':
              agentSetup()
      Severity: Major
      Found in fontfuzzer/hostagent.py and 1 other location - About 3 hrs to fix
      fontfuzzer/serveragent.py on lines 476..481

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 72.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language