hackedteam/vector-exploit

View on GitHub

Showing 170 of 389 total issues

Identical blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/edn2/2013-005-IE-TLS/resources/xp_filter.py and 2 other locations - About 1 day to fix
src/edn2/2013-002-Word-TLS/resources/xp_filter.py on lines 0..24
src/edn2/2013-003-PowerPoint-TLS/resources/xp_filter.py on lines 0..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 173.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/edn2/2013-003-PowerPoint-TLS/resources/xp_filter.py and 2 other locations - About 1 day to fix
src/edn2/2013-002-Word-TLS/resources/xp_filter.py on lines 0..24
src/edn2/2013-005-IE-TLS/resources/xp_filter.py on lines 0..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 173.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

Severity: Major
Found in src/edn2/2013-002-Word-TLS/resources/xp_filter.py and 2 other locations - About 1 day to fix
src/edn2/2013-003-PowerPoint-TLS/resources/xp_filter.py on lines 0..24
src/edn2/2013-005-IE-TLS/resources/xp_filter.py on lines 0..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 173.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for (var i = 0; i < CALLSTUB.length/4; i++) {
    switch (memobj.read32(shellcode_addr + i*4)) {
    case 0xbadadd00:
        memobj.write32(shellcode_addr + i*4, addr + 0x8300 + gadgets.str_r1_r4.disp);
        break;
Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 2000..2024

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 260.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for (var i = 0; i < CALLSTUB.length/4; i++) {
    switch (memobj.read32(shellcode_addr + i*4)) {
    case 0xbadadd00:
        memobj.write32(shellcode_addr + i*4, addr + 0x8300 + gadgets.str_r1_r4.disp);
        break;
Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 1674..1698

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 260.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

@app.route(PREFIX + '/data.xml')
def data_xml():
    base = request.args.get('id')
    nextaddr = request.args.get('contentId')

Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/debugserver.py and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/src/debugserver.py on lines 94..118

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

@app.route(PREFIX + '/data.xml')
def data_xml():
    base = request.args.get('id')
    nextaddr = request.args.get('contentId')

Severity: Major
Found in src/ht-webkit-Android4-src/src/debugserver.py and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/debugserver.py on lines 146..170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

BufferMemoryObject.prototype.find32 = function(startaddr, endaddr, arr) {
    if (startaddr === undefined) {
    ERR("find32: a start address is required");
    }

Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 2498..2531

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 214.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

BufferMemoryObject.prototype.find16 = function(startaddr, endaddr, arr) {
    if (startaddr === undefined) {
    ERR("find16: a start address is required");
    }

Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 2459..2492

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 214.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

src/ht-webkit-Android4-src/src/debug-tornado.py on lines 0..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 127.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

Severity: Major
Found in src/ht-webkit-Android4-src/src/debug-tornado.py and 1 other location - About 1 day to fix
src/ht-webkit-Android4-src/precompiled/debug/debug-tornado.py on lines 0..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 127.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            for i in gadgets:

                if i != 3 and i != 5 : # skip mprotect and wbc_s_a
                    gadgets[i] = hex((int(gadgets[i], 16) + 1))[2:]

Severity: Major
Found in src/ht-webkit-Android23/webkit_rc3_plus_tea.py and 1 other location - About 1 day to fix
src/ht-webkit-Android23/webkit_rc3_plus_tea.py on lines 936..941

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 122.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            for i in gadgets:
            
                if i != 6 and i != 8: # skip mprotect and wbc_s_a
                    gadgets[i] = hex((int(gadgets[i], 16) + 1))[2:] # thumb +1

Severity: Major
Found in src/ht-webkit-Android23/webkit_rc3_plus_tea.py and 1 other location - About 1 day to fix
src/ht-webkit-Android23/webkit_rc3_plus_tea.py on lines 774..779

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 122.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

for i in range(len(ole_link_bytearray)):
    if i == ole_link_offt or i == ole_link2_offt or i == ole_link3_offt:
        y = 0
        for x in range(len(swf_url_bytearray)):
            ole_link_bytearray[i+y] = swf_url_bytearray[x]
Severity: Major
Found in ht-2013-002-Word/exploit.py and 1 other location - About 7 hrs to fix
src/exploit_vps/html/admin/2013-002-Word/exploit.py on lines 240..246

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 114.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

for i in range(len(ole_link_bytearray)):
    if i == ole_link_offt or i == ole_link2_offt or i == ole_link3_offt:
        y = 0
        for x in range(len(swf_url_bytearray)):
            ole_link_bytearray[i+y] = swf_url_bytearray[x]
Severity: Major
Found in src/exploit_vps/html/admin/2013-002-Word/exploit.py and 1 other location - About 7 hrs to fix
ht-2013-002-Word/exploit.py on lines 295..301

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 114.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for (var cur = addr + 0x1000; cur < addr + 0x2000; cur += 0x40) {
        for (var ca = cur - 4; ca < cur + 0x40; ca +=16) {
            INFO(hex(ca, 8) + ": " + hex(memobj.read32(ca), 8) + " " +
             hex(memobj.read32(ca+4), 8) + " " +
             hex(memobj.read32(ca+8), 8) + " " +
Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 7 hrs to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 1432..1441

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 181.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        for (var cur = addr + 0x2100; cur < addr + 0x3000; cur += 0x50) {
        for (var ca = cur - 4; ca < cur + 0x50; ca +=16) {
            INFO(hex(ca, 8) + ": " + hex(memobj.read32(ca), 8) + " " +
             hex(memobj.read32(ca+4), 8) + " " +
             hex(memobj.read32(ca+8), 8) + " " +
Severity: Major
Found in src/ht-webkit-Android4-src/precompiled/debug/script.js and 1 other location - About 7 hrs to fix
src/ht-webkit-Android4-src/precompiled/debug/script.js on lines 1420..1429

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 181.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

if sys.argv[2][-1] == "/":
    EXE_URL = sys.argv[2] + EXE_RANDOM_NAME
    SWF_URL = sys.argv[2] + SWF_RANDOM_NAME
else:
    EXE_URL = sys.argv[2] + '/' + EXE_RANDOM_NAME
Severity: Major
Found in ht-2013-003-Powerpoint/exploit.py and 3 other locations - About 7 hrs to fix
ht-2013-002-Word/exploit.py on lines 45..50
src/exploit_vps/html/admin/2013-002-Word/exploit.py on lines 41..46
src/exploit_vps/html/admin/2013-003-PowerPoint/exploit.py on lines 41..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

if sys.argv[2][-1] == "/":
    EXE_URL = sys.argv[2] + EXE_RANDOM_NAME
    SWF_URL = sys.argv[2] + SWF_RANDOM_NAME
else:
    EXE_URL = sys.argv[2] + '/' + EXE_RANDOM_NAME
Severity: Major
Found in src/exploit_vps/html/admin/2013-003-PowerPoint/exploit.py and 3 other locations - About 7 hrs to fix
ht-2013-002-Word/exploit.py on lines 45..50
ht-2013-003-Powerpoint/exploit.py on lines 45..50
src/exploit_vps/html/admin/2013-002-Word/exploit.py on lines 41..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

if sys.argv[2][-1] == "/":
    EXE_URL = sys.argv[2] + EXE_RANDOM_NAME
    SWF_URL = sys.argv[2] + SWF_RANDOM_NAME
else:
    EXE_URL = sys.argv[2] + '/' + EXE_RANDOM_NAME
Severity: Major
Found in src/exploit_vps/html/admin/2013-002-Word/exploit.py and 3 other locations - About 7 hrs to fix
ht-2013-002-Word/exploit.py on lines 45..50
ht-2013-003-Powerpoint/exploit.py on lines 45..50
src/exploit_vps/html/admin/2013-003-PowerPoint/exploit.py on lines 41..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language