imagecms/ImageCMS

View on GitHub

Showing 470 of 1,858 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function buildCriteria()
    {
        $criteria = new Criteria(BannerImageI18nTableMap::DATABASE_NAME);

        if ($this->isColumnModified(BannerImageI18nTableMap::COL_ID)) {
Severity: Major
Found in application/modules/xbanners/models/Base/BannerImageI18n.php and 1 other location - About 6 hrs to fix
application/modules/xbanners/models/Base/Banners.php on lines 1197..1221

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 210.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected static $fieldKeys = array (
        self::TYPE_PHPNAME       => array('Id' => 0, 'Locale' => 1, 'Src' => 2, 'Name' => 3, 'Clicks' => 4, 'Description' => 5, ),
        self::TYPE_CAMELNAME     => array('id' => 0, 'locale' => 1, 'src' => 2, 'name' => 3, 'clicks' => 4, 'description' => 5, ),
        self::TYPE_COLNAME       => array(BannerImageI18nTableMap::COL_ID => 0, BannerImageI18nTableMap::COL_LOCALE => 1, BannerImageI18nTableMap::COL_SRC => 2, BannerImageI18nTableMap::COL_NAME => 3, BannerImageI18nTableMap::COL_CLICKS => 4, BannerImageI18nTableMap::COL_DESCRIPTION => 5, ),
        self::TYPE_FIELDNAME     => array('id' => 0, 'locale' => 1, 'src' => 2, 'name' => 3, 'clicks' => 4, 'description' => 5, ),
application/modules/xbanners/models/Map/BannersTableMap.php on lines 138..144

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected static $fieldKeys = array (
        self::TYPE_PHPNAME       => array('Id' => 0, 'Place' => 1, 'Width' => 2, 'Height' => 3, 'Effects' => 4, 'PageType' => 5, ),
        self::TYPE_CAMELNAME     => array('id' => 0, 'place' => 1, 'width' => 2, 'height' => 3, 'effects' => 4, 'pageType' => 5, ),
        self::TYPE_COLNAME       => array(BannersTableMap::COL_ID => 0, BannersTableMap::COL_PLACE => 1, BannersTableMap::COL_WIDTH => 2, BannersTableMap::COL_HEIGHT => 3, BannersTableMap::COL_EFFECTS => 4, BannersTableMap::COL_PAGE_TYPE => 5, ),
        self::TYPE_FIELDNAME     => array('id' => 0, 'place' => 1, 'width' => 2, 'height' => 3, 'effects' => 4, 'page_type' => 5, ),
Severity: Major
Found in application/modules/xbanners/models/Map/BannersTableMap.php and 1 other location - About 6 hrs to fix
application/modules/xbanners/models/Map/BannerImageI18nTableMap.php on lines 129..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

$.fn.cycle.transitions.scrollRight = function($cont, $slides, opts) {
    $cont.css('overflow','hidden');
    opts.before.push($.fn.cycle.commonReset);
    var w = $cont.width();
    opts.cssFirst = { left: 0 };
Severity: Major
Found in application/modules/xbanners/assets/js/cycle.js and 1 other location - About 6 hrs to fix
application/modules/xbanners/assets/js/cycle.js on lines 862..870

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 159.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

$.fn.cycle.transitions.scrollDown = function($cont, $slides, opts) {
    $cont.css('overflow','hidden');
    opts.before.push($.fn.cycle.commonReset);
    var h = $cont.height();
    opts.cssFirst = { top: 0 };
Severity: Major
Found in application/modules/xbanners/assets/js/cycle.js and 1 other location - About 6 hrs to fix
application/modules/xbanners/assets/js/cycle.js on lines 880..888

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 159.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function reload($deep = false, ConnectionInterface $con = null)
    {
        if ($this->isDeleted()) {
            throw new PropelException("Cannot reload a deleted object.");
        }
Severity: Major
Found in application/modules/xbanners/models/Base/BannerImageI18n.php and 1 other location - About 6 hrs to fix
application/modules/xbanners/models/Base/BannersI18n.php on lines 525..554

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 206.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function reload($deep = false, ConnectionInterface $con = null)
    {
        if ($this->isDeleted()) {
            throw new PropelException("Cannot reload a deleted object.");
        }
Severity: Major
Found in application/modules/xbanners/models/Base/BannersI18n.php and 1 other location - About 6 hrs to fix
application/modules/xbanners/models/Base/BannerImageI18n.php on lines 645..674

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 206.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

     public static function doDelete($values, ConnectionInterface $con = null)
     {
        if (null === $con) {
            $con = Propel::getServiceContainer()->getWriteConnection(BannerImageTableMap::DATABASE_NAME);
        }
application/modules/core/models/Map/RouteTableMap.php on lines 378..406
application/modules/xbanners/models/Map/BannersTableMap.php on lines 406..434

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

     public static function doDelete($values, ConnectionInterface $con = null)
     {
        if (null === $con) {
            $con = Propel::getServiceContainer()->getWriteConnection(BannersTableMap::DATABASE_NAME);
        }
Severity: Major
Found in application/modules/xbanners/models/Map/BannersTableMap.php and 2 other locations - About 6 hrs to fix
application/modules/core/models/Map/RouteTableMap.php on lines 378..406
application/modules/xbanners/models/Map/BannerImageTableMap.php on lines 437..465

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

     public static function doDelete($values, ConnectionInterface $con = null)
     {
        if (null === $con) {
            $con = Propel::getServiceContainer()->getWriteConnection(RouteTableMap::DATABASE_NAME);
        }
Severity: Major
Found in application/modules/core/models/Map/RouteTableMap.php and 2 other locations - About 6 hrs to fix
application/modules/xbanners/models/Map/BannerImageTableMap.php on lines 437..465
application/modules/xbanners/models/Map/BannersTableMap.php on lines 406..434

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setno() {
        $comid = $this->input->post('comid');
        if ($this->session->userdata('commentl' . $comid) != 1) {
            $row = $this->db->where('id', $comid)->get('comments')->row();
            $disslike = $row->disslike;
Severity: Major
Found in application/modules/comments/commentsapi.php and 1 other location - About 5 hrs to fix
application/modules/comments/commentsapi.php on lines 600..617

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 200.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function setyes() {
        $comid = $this->input->post('comid');
        if ($this->session->userdata('commentl' . $comid) != 1) {
            $row = $this->db->where('id', $comid)->get('comments')->row();
            $like = $row->like;
Severity: Major
Found in application/modules/comments/commentsapi.php and 1 other location - About 5 hrs to fix
application/modules/comments/commentsapi.php on lines 619..636

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 200.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($includeForeignObjects) {
            if (null !== $this->collBannerImages) {

                switch ($keyType) {
                    case TableMap::TYPE_CAMELNAME:
Severity: Major
Found in application/modules/xbanners/models/Base/Banners.php and 1 other location - About 5 hrs to fix
application/modules/core/models/Base/Route.php on lines 989..1020

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($includeForeignObjects) {
            if (null !== $this->collSCategories) {

                switch ($keyType) {
                    case TableMap::TYPE_CAMELNAME:
Severity: Major
Found in application/modules/core/models/Base/Route.php and 1 other location - About 5 hrs to fix
application/modules/xbanners/models/Base/Banners.php on lines 1033..1064

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    $('.dropdown-attr a').unbind('click').bind('click', function () {
        $startPoint = $(this).closest('div');
        $name = $(this).text();
        $attname = $(this).attr('data-attname');
        $names = '';
application/modules/import_export/assets/js/importAdmin.js on lines 78..90

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    $('.dropdown-attr a').unbind('click').bind('click', function () {
        $startPoint = $(this).closest('div');
        $name = $(this).text();
        $attname = $(this).attr('data-attname');
        $names = '';
Severity: Major
Found in application/modules/import_export/assets/js/importAdmin.js and 1 other location - About 5 hrs to fix
application/modules/import_export/assets/js/importExportAdmin.js on lines 85..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        else if ($this.closest('.head')[0] != undefined) {
            changeCheck($this.find('.niceCheck'));
            if ($this.hasClass('active')) {
                $this.parents('#category').find('.frame_label').each(function () {
                    changeCheckallchecks($(this).find('.niceCheck'));
Severity: Major
Found in application/modules/xbanners/assets/js/script.js and 1 other location - About 5 hrs to fix
application/modules/xbanners/assets/js/script.js on lines 46..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($this.closest('thead')[0] != undefined) {
            changeCheck($this.find('.niceCheck'));
            if ($this.hasClass('active')) {
                $this.parents('table').find('.frame_label').each(function () {
                    changeCheckallchecks($(this).find('.niceCheck'));
Severity: Major
Found in application/modules/xbanners/assets/js/script.js and 1 other location - About 5 hrs to fix
application/modules/xbanners/assets/js/script.js on lines 59..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    removeDotsCheck: function (curEl) {
        var arrows = $(curEl).closest('.control-group').next('div').find('input');

        $(arrows).removeAttr('checked');

Severity: Major
Found in application/modules/xbanners/assets/js/script.js and 1 other location - About 5 hrs to fix
application/modules/xbanners/assets/js/script.js on lines 237..246

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 143.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    removeArrowsCheck: function (curEl) {
        var arrows = $(curEl).closest('.control-group').prev('div').find('input');

        $(arrows).removeAttr('checked');

Severity: Major
Found in application/modules/xbanners/assets/js/script.js and 1 other location - About 5 hrs to fix
application/modules/xbanners/assets/js/script.js on lines 227..236

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 143.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language