Showing 14 of 24 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    context 'with type F (float)' do
      context 'with 0 length' do
        it 'returns nil' do
          column = DBF::Column.new table, 'ColumnName', 'F', 0, 0
          expect(column.type_cast('')).to be_nil
Severity: Major
Found in spec/dbf/column_spec.rb and 1 other location - About 1 hr to fix
spec/dbf/column_spec.rb on lines 134..151

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    context 'with type I (integer)' do
      context 'with 0 length' do
        it 'returns nil' do
          column = DBF::Column.new table, 'ColumnName', 'I', 0, 0
          expect(column.type_cast('')).to be_nil
Severity: Major
Found in spec/dbf/column_spec.rb and 1 other location - About 1 hr to fix
spec/dbf/column_spec.rb on lines 91..108

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      context 'with 0 decimals' do
        it 'casts value to Integer' do
          value = '135'
          column = DBF::Column.new table, 'ColumnName', 'N', 3, 0
          expect(column.type_cast(value)).to eq 135
Severity: Major
Found in spec/dbf/column_spec.rb and 1 other location - About 1 hr to fix
spec/dbf/column_spec.rb on lines 76..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      context 'with more than 0 decimals' do
        it 'casts value to Float' do
          value = '13.5'
          column = DBF::Column.new table, 'ColumnName', 'N', 2, 1
          expect(column.type_cast(value)).to eq 13.5
Severity: Major
Found in spec/dbf/column_spec.rb and 1 other location - About 1 hr to fix
spec/dbf/column_spec.rb on lines 62..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 31 (Visual FoxPro with AutoIncrement field)' do
  let(:table) { DBF::Table.new fixture('dbase_31.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 163..177
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 02 (FoxBase)' do
  let(:table) { DBF::Table.new fixture('dbase_02.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 163..177
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 8b (dBase IV with memo file)' do
  let(:table) { DBF::Table.new fixture('dbase_8b.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 8c (unknown)' do
  let(:table) { DBF::Table.new fixture('dbase_8c.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 163..177

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 32 (Visual FoxPro with field type Varchar or Varbinary)' do
  let(:table) { DBF::Table.new fixture('dbase_32.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 163..177
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 83 (dBase III with memo file)' do
  let(:table) { DBF::Table.new fixture('dbase_83.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 69..83
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 163..177
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

RSpec.describe DBF, 'of type 03 (dBase III without memo file)' do
  let(:table) { DBF::Table.new fixture('dbase_03.dbf') }

  it_behaves_like 'DBF'

Severity: Major
Found in spec/dbf/file_formats_spec.rb and 6 other locations - About 50 mins to fix
spec/dbf/file_formats_spec.rb on lines 51..65
spec/dbf/file_formats_spec.rb on lines 109..123
spec/dbf/file_formats_spec.rb on lines 127..141
spec/dbf/file_formats_spec.rb on lines 145..159
spec/dbf/file_formats_spec.rb on lines 163..177
spec/dbf/file_formats_spec.rb on lines 181..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 43.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        it 'stores original precision' do
          column = DBF::Column.new table, 'ColumnName', 'B', 1, 0
          expect(column.type_cast("\xEC\x51\xB8\x1E\x85\x6B\x31\x40")).to be_a(Float)
          expect(column.type_cast("\xEC\x51\xB8\x1E\x85\x6B\x31\x40")).to eq 17.42
Severity: Minor
Found in spec/dbf/column_spec.rb and 2 other locations - About 20 mins to fix
spec/dbf/column_spec.rb on lines 114..117
spec/dbf/column_spec.rb on lines 126..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        it 'supports negative binary' do
          column = DBF::Column.new table, 'ColumnName', 'B', 1, 2
          expect(column.type_cast("\x00\x00\x00\x00\x00\xC0\x65\xC0")).to be_a(Float)
          expect(column.type_cast("\x00\x00\x00\x00\x00\xC0\x65\xC0")).to eq(-174.0)
Severity: Minor
Found in spec/dbf/column_spec.rb and 2 other locations - About 20 mins to fix
spec/dbf/column_spec.rb on lines 114..117
spec/dbf/column_spec.rb on lines 120..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        it 'casts to float' do
          column = DBF::Column.new table, 'ColumnName', 'B', 1, 2
          expect(column.type_cast("\xEC\x51\xB8\x1E\x85\x6B\x31\x40")).to be_a(Float)
          expect(column.type_cast("\xEC\x51\xB8\x1E\x85\x6B\x31\x40")).to eq 17.42
Severity: Minor
Found in spec/dbf/column_spec.rb and 2 other locations - About 20 mins to fix
spec/dbf/column_spec.rb on lines 120..123
spec/dbf/column_spec.rb on lines 126..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language