# josh-paul/dotted_dict

dotted_dict/__init__.py

### Summary

D
2 days

#### Cyclomatic complexity is too high in method __init__. (8) Open

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method __init__. (8) Open

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method update. (8) Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method update. (8) Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method to_dict. (7) Open

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method _parse_input_. (7) Open

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method _parse_input_. (7) Open

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method to_dict. (7) Open

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Cyclomatic complexity is too high in method _make_safe_. (6) Open

``````    def _make_safe_(self, key):
"""
Replace the space characters on the key with _ to make valid attrs.
"""
key = str(key)``````

## Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

#### Function `_parse_input_` has a Cognitive Complexity of 13 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `_parse_input_` has a Cognitive Complexity of 13 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `to_dict` has a Cognitive Complexity of 13 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `to_dict` has a Cognitive Complexity of 13 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `__init__` has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `update` has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `__init__` has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `update` has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring. Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````
Found in dotted_dict/__init__.py - About 1 hr to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Function `_make_safe_` has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Wontfix

``````    def _make_safe_(self, key):
"""
Replace the space characters on the key with _ to make valid attrs.
"""
key = str(key)``````
Found in dotted_dict/__init__.py - About 25 mins to fix

# Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

### A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````
Found in dotted_dict/__init__.py and 1 other location - About 1 day to fix
dotted_dict/__init__.py on lines 251..269

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def to_dict(self):
"""
Recursive conversion back to dict.
"""
out = dict(self)``````
Found in dotted_dict/__init__.py and 1 other location - About 1 day to fix
dotted_dict/__init__.py on lines 138..156

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````
Found in dotted_dict/__init__.py and 1 other location - About 1 day to fix
dotted_dict/__init__.py on lines 98..113

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def _parse_input_(self, input_item):
"""
Parse the input item if dict into the dotted_dict constructor.
"""
for key, value in input_item.items():``````
Found in dotted_dict/__init__.py and 1 other location - About 1 day to fix
dotted_dict/__init__.py on lines 211..226

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````
Found in dotted_dict/__init__.py and 1 other location - About 6 hrs to fix
dotted_dict/__init__.py on lines 234..249

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Open

``````    def update(self, *args, **kwargs):
"""
Override dict standard update method.
"""
for arg in args:``````
Found in dotted_dict/__init__.py and 1 other location - About 6 hrs to fix
dotted_dict/__init__.py on lines 121..136

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 108.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````
Found in dotted_dict/__init__.py and 1 other location - About 6 hrs to fix
dotted_dict/__init__.py on lines 11..23

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __init__(self, *args, **kwargs):
for arg in args:
if isinstance(arg, dict):
self._parse_input_(arg)
elif isinstance(arg, list):``````
Found in dotted_dict/__init__.py and 1 other location - About 6 hrs to fix
dotted_dict/__init__.py on lines 165..177

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 105.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __repr__(self):
"""
Wrap the returned dict in DottedDict() on output.
"""
return "{0}({1})".format(type(self).__name__, super(DottedDict, self).__repr__())``````
Found in dotted_dict/__init__.py and 1 other location - About 40 mins to fix
dotted_dict/__init__.py on lines 196..201

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 34.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __repr__(self):
"""
Wrap the returned dict in DottedDict() on output.
"""
return "{0}({1})".format(``````
Found in dotted_dict/__init__.py and 1 other location - About 40 mins to fix
dotted_dict/__init__.py on lines 42..46

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 34.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __delitem__(self, key):
super(DottedDict, self).__delitem__(key)
del self.__dict__[key]``````
Found in dotted_dict/__init__.py and 1 other location - About 30 mins to fix
dotted_dict/__init__.py on lines 182..184

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __getattr__(self, attr):
try:
return self.__dict__[attr]
# Do this to match python default behavior
except KeyError:``````
Found in dotted_dict/__init__.py and 1 other location - About 30 mins to fix
dotted_dict/__init__.py on lines 32..37

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Similar blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __delitem__(self, key):
super(PreserveKeysDottedDict, self).__delitem__(key)
del self.__dict__[key]``````
Found in dotted_dict/__init__.py and 1 other location - About 30 mins to fix
dotted_dict/__init__.py on lines 28..30

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.

## Refactorings

#### Identical blocks of code found in 2 locations. Consider refactoring. Wontfix

``````    def __getattr__(self, attr):
try:
return self.__dict__[attr]
# Do this to match python default behavior
except KeyError:``````
Found in dotted_dict/__init__.py and 1 other location - About 30 mins to fix
dotted_dict/__init__.py on lines 186..191

## Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

## Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See `codeclimate-duplication`'s documentation for more information about tuning the mass threshold in your `.codeclimate.yml`.