Showing 490 of 490 total issues

Resource has 22 functions (exceeds 20 allowed). Consider refactoring.
Open

class Resource(Watchable):
    def __init__(self, url=None, **kwargs):
        super().__init__()
        self.url = url
        self.opts = kwargs
Severity: Minor
Found in src/pyff/resource.py - About 2 hrs to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if params['via'] is not None:
                params['via'] = [PipelineCallback(p, req, store=req.md.store) for p in params['via']]
    Severity: Major
    Found in src/pyff/builtins.py and 1 other location - About 2 hrs to fix
    src/pyff/builtins.py on lines 624..625

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

            if params['cleanup'] is not None:
                params['cleanup'] = [PipelineCallback(p, req, store=req.md.store) for p in params['cleanup']]
    Severity: Major
    Found in src/pyff/builtins.py and 1 other location - About 2 hrs to fix
    src/pyff/builtins.py on lines 621..622

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 54.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Cyclomatic complexity is too high in function _fmt. (9)
    Open

    def _fmt(data, accepter):
        if data is None or len(data) == 0:
            return "", 'text/plain'
        if isinstance(data, (etree._Element, etree._ElementTree)) and (
                accepter.get('text/xml') or accepter.get('application/xml') or accepter.get(
    Severity: Minor
    Found in src/pyff/api.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function emit. (9)
    Open

    @pipe
    def emit(req, ctype="application/xml", *opts):
        """
    
        Returns a UTF-8 encoded representation of the working tree.
    Severity: Minor
    Found in src/pyff/builtins.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function resource_string. (9)
    Open

    def resource_string(name, pfx=None):
        """
    Attempt to load and return the contents (as a string) of the resource named by
    the first argument in the first location of:
    
    
    Severity: Minor
    Found in src/pyff/utils.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method webfinger. (9)
    Open

        @cherrypy.expose
        def webfinger(self, resource=None, rel=None):
            """An implementation the webfinger protocol (http://tools.ietf.org/html/draft-ietf-appsawg-webfinger-12)
            in order to provide information about up and downstream metadata available at this pyFF instance.
    
    
    Severity: Minor
    Found in src/pyff/mdx.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method parse. (9)
    Open

        def parse(self, resource, content):
            info = dict()
            info['Description'] = "eIDAS MetadataServiceList"
            t = parse_xml(unicode_stream(content))
            t.xinclude()
    Severity: Minor
    Found in src/pyff/samlmd.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in method lookup. (9)
    Open

        @ttl_cache(ttl=config.cache_ttl, maxsize=config.cache_size)
        def lookup(self, key):
            if key == 'entities' or key is None:
                return self._entities()
    
    
    Severity: Minor
    Found in src/pyff/store.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function _update has 55 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

            _update: function () {
                var obj = this;
                obj.discovery_service_storage_url = obj.options['discovery_service_storage_url'] || obj.element.attr('data-store');
                obj.sp_entity_id = obj.options['sp_entity_id'] || obj.element.attr('data-href');
                obj.discovery_service_search_url = obj.options['discovery_service_search_url'] || obj.element.attr('data-search');
    Severity: Major
    Found in src/pyff/site/static/js/jquery-ds-widget.js - About 2 hrs to fix

      RedisWhooshStore has 21 functions (exceeds 20 allowed). Consider refactoring.
      Open

      class RedisWhooshStore(SAMLStoreBase):  # TODO: This needs a gc mechanism for keys (uuids)
      
          def json_dict(self, name):
              return LRUProxyDict(JSONDict(key='{}_{}'.format(self._name, name),
                                           redis=self._redis,
      Severity: Minor
      Found in src/pyff/store.py - About 2 hrs to fix

        Cyclomatic complexity is too high in function _select_args. (8)
        Open

        def _select_args(req):
            args = req.args
            if args is None and 'select' in req.state:
                args = [req.state.get('select')]
            if args is None:
        Severity: Minor
        Found in src/pyff/builtins.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in method _setup. (8)
        Open

            def _setup(self):
                self.opts.setdefault('cleanup', [])
                self.opts.setdefault('via', [])
                self.opts.setdefault('fail_on_error', False)
                self.opts.setdefault('verify', None)
        Severity: Minor
        Found in src/pyff/resource.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function entity_extended_display. (8)
        Open

        def entity_extended_display(entity, langs=None):
            """Utility-method for computing a displayable string for a given entity.
        
            :param entity: An EntityDescriptor element
            :param langs: The list of languages to search in priority order
        Severity: Minor
        Found in src/pyff/samlmd.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function img_to_data. (8)
        Open

        def img_to_data(data, content_type):
            """Convert a file (specified by a path) into a data URI."""
            mime_type, options = cgi.parse_header(content_type)
            data64 = None
            if len(data) > config.icon_maxsize:
        Severity: Minor
        Found in src/pyff/utils.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        Cyclomatic complexity is too high in function b2u. (8)
        Open

        def b2u(data):
            if is_text(data):
                return data
            elif isinstance(data, six.binary_type):
                return data.decode("utf-8")
        Severity: Minor
        Found in src/pyff/utils.py by radon

        Cyclomatic Complexity

        Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

        Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

        Construct Effect on CC Reasoning
        if +1 An if statement is a single decision.
        elif +1 The elif statement adds another decision.
        else +0 The else statement does not cause a new decision. The decision is at the if.
        for +1 There is a decision at the start of the loop.
        while +1 There is a decision at the while statement.
        except +1 Each except branch adds a new conditional path of execution.
        finally +0 The finally block is unconditionally executed.
        with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
        assert +1 The assert statement internally roughly equals a conditional statement.
        Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
        Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

        Source: http://radon.readthedocs.org/en/latest/intro.html

        File pipes.py has 256 lines of code (exceeds 250 allowed). Consider refactoring.
        Open

        """
        Pipes and plumbing. Plumbing instances are sequences of pipes. Each pipe is called in order to load, select,
        transform, sign or output SAML metadata.
        """
        
        
        Severity: Minor
        Found in src/pyff/pipes.py - About 2 hrs to fix

          Cyclomatic complexity is too high in function _store. (7)
          Open

          @pipe(name='store')
          def _store(req, *opts):
              """
          
              Save the working document as separate files
          Severity: Minor
          Found in src/pyff/builtins.py by radon

          Cyclomatic Complexity

          Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

          Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

          Construct Effect on CC Reasoning
          if +1 An if statement is a single decision.
          elif +1 The elif statement adds another decision.
          else +0 The else statement does not cause a new decision. The decision is at the if.
          for +1 There is a decision at the start of the loop.
          while +1 There is a decision at the while statement.
          except +1 Each except branch adds a new conditional path of execution.
          finally +0 The finally block is unconditionally executed.
          with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
          assert +1 The assert statement internally roughly equals a conditional statement.
          Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
          Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

          Source: http://radon.readthedocs.org/en/latest/intro.html

          Cyclomatic complexity is too high in function with_entity_attributes. (7)
          Open

          def with_entity_attributes(entity, cb):
              def _stext(e):
                  if e.text is not None:
                      return e.text.strip()
          
          
          Severity: Minor
          Found in src/pyff/samlmd.py by radon

          Cyclomatic Complexity

          Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

          Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

          Construct Effect on CC Reasoning
          if +1 An if statement is a single decision.
          elif +1 The elif statement adds another decision.
          else +0 The else statement does not cause a new decision. The decision is at the if.
          for +1 There is a decision at the start of the loop.
          while +1 There is a decision at the while statement.
          except +1 Each except branch adds a new conditional path of execution.
          finally +0 The finally block is unconditionally executed.
          with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
          assert +1 The assert statement internally roughly equals a conditional statement.
          Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
          Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

          Source: http://radon.readthedocs.org/en/latest/intro.html

          Cyclomatic complexity is too high in function resource_filename. (7)
          Open

          def resource_filename(name, pfx=None):
              """
          Attempt to find and return the filename of the resource named by the first argument
          in the first location of:
          
          
          Severity: Minor
          Found in src/pyff/utils.py by radon

          Cyclomatic Complexity

          Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

          Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

          Construct Effect on CC Reasoning
          if +1 An if statement is a single decision.
          elif +1 The elif statement adds another decision.
          else +0 The else statement does not cause a new decision. The decision is at the if.
          for +1 There is a decision at the start of the loop.
          while +1 There is a decision at the while statement.
          except +1 Each except branch adds a new conditional path of execution.
          finally +0 The finally block is unconditionally executed.
          with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
          assert +1 The assert statement internally roughly equals a conditional statement.
          Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
          Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

          Source: http://radon.readthedocs.org/en/latest/intro.html

          Severity
          Category
          Status
          Source
          Language