Showing 3,608 of 3,608 total issues
Similar blocks of code found in 3 locations. Consider refactoring. Open
var _vector=function(op){return function(){if(arguments[0]instanceof Array){return op.apply(null,arguments[0]);}else{return op.apply(null,arguments);}};};var vx="each any all".split(/\s/);for(var j=0;j<vx.length;j++){_[vx[j]]=_vector(_[vx[j]]);}}());(function(){var flattenAndCompact=function(ax){var rx=[];for(var i=0;i<ax.length;i++){if(ax[i]instanceof Array){rx=rx.concat(flattenAndCompact(ax[i]));}else{if(ax[i]){rx.push(ax[i]);}}}
return rx;};Date.Grammar={};Date.Translator={hour:function(s){return function(){this.hour=Number(s);};},minute:function(s){return function(){this.minute=Number(s);};},second:function(s){return function(){this.second=Number(s);};},meridian:function(s){return function(){this.meridian=s.slice(0,1).toLowerCase();};},timezone:function(s){return function(){var n=s.replace(/[^\d\+\-]/g,"");if(n.length){this.timezoneOffset=Number(n);}else{this.timezone=s.toLowerCase();}};},day:function(x){var s=x[0];return function(){this.day=Number(s.match(/\d+/)[0]);};},month:function(s){return function(){this.month=((s.length==3)?Date.getMonthNumberFromName(s):(Number(s)-1));};},year:function(s){return function(){var n=Number(s);this.year=((s.length>2)?n:(n+(((n+2000)<Date.CultureInfo.twoDigitYearMax)?2000:1900)));};},rday:function(s){return function(){switch(s){case"yesterday":this.days=-1;break;case"tomorrow":this.days=1;break;case"today":this.days=0;break;case"now":this.days=0;this.now=true;break;}};},finishExact:function(x){x=(x instanceof Array)?x:[x];var now=new Date();this.year=now.getFullYear();this.month=now.getMonth();this.day=1;this.hour=0;this.minute=0;this.second=0;for(var i=0;i<x.length;i++){if(x[i]){x[i].call(this);}}
this.hour=(this.meridian=="p"&&this.hour<13)?this.hour+12:this.hour;if(this.day>Date.getDaysInMonth(this.year,this.month)){throw new RangeError(this.day+" is not a valid value for days.");}
var r=new Date(this.year,this.month,this.day,this.hour,this.minute,this.second);if(this.timezone){r.set({timezone:this.timezone});}else if(this.timezoneOffset){r.set({timezoneOffset:this.timezoneOffset});}
return r;},finish:function(x){x=(x instanceof Array)?flattenAndCompact(x):[x];if(x.length===0){return null;}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 4445.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var _vector=function(op){return function(){if(arguments[0]instanceof Array){return op.apply(null,arguments[0]);}else{return op.apply(null,arguments);}};};var vx="each any all".split(/\s/);for(var j=0;j<vx.length;j++){_[vx[j]]=_vector(_[vx[j]]);}}());(function(){var flattenAndCompact=function(ax){var rx=[];for(var i=0;i<ax.length;i++){if(ax[i]instanceof Array){rx=rx.concat(flattenAndCompact(ax[i]));}else{if(ax[i]){rx.push(ax[i]);}}}
return rx;};Date.Grammar={};Date.Translator={hour:function(s){return function(){this.hour=Number(s);};},minute:function(s){return function(){this.minute=Number(s);};},second:function(s){return function(){this.second=Number(s);};},meridian:function(s){return function(){this.meridian=s.slice(0,1).toLowerCase();};},timezone:function(s){return function(){var n=s.replace(/[^\d\+\-]/g,"");if(n.length){this.timezoneOffset=Number(n);}else{this.timezone=s.toLowerCase();}};},day:function(x){var s=x[0];return function(){this.day=Number(s.match(/\d+/)[0]);};},month:function(s){return function(){this.month=((s.length==3)?Date.getMonthNumberFromName(s):(Number(s)-1));};},year:function(s){return function(){var n=Number(s);this.year=((s.length>2)?n:(n+(((n+2000)<Date.CultureInfo.twoDigitYearMax)?2000:1900)));};},rday:function(s){return function(){switch(s){case"yesterday":this.days=-1;break;case"tomorrow":this.days=1;break;case"today":this.days=0;break;case"now":this.days=0;this.now=true;break;}};},finishExact:function(x){x=(x instanceof Array)?x:[x];var now=new Date();this.year=now.getFullYear();this.month=now.getMonth();this.day=1;this.hour=0;this.minute=0;this.second=0;for(var i=0;i<x.length;i++){if(x[i]){x[i].call(this);}}
this.hour=(this.meridian=="p"&&this.hour<13)?this.hour+12:this.hour;if(this.day>Date.getDaysInMonth(this.year,this.month)){throw new RangeError(this.day+" is not a valid value for days.");}
var r=new Date(this.year,this.month,this.day,this.hour,this.minute,this.second);if(this.timezone){r.set({timezone:this.timezone});}else if(this.timezoneOffset){r.set({timezoneOffset:this.timezoneOffset});}
return r;},finish:function(x){x=(x instanceof Array)?flattenAndCompact(x):[x];if(x.length===0){return null;}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 4445.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var _vector=function(op){return function(){if(arguments[0]instanceof Array){return op.apply(null,arguments[0]);}else{return op.apply(null,arguments);}};};var vx="each any all".split(/\s/);for(var j=0;j<vx.length;j++){_[vx[j]]=_vector(_[vx[j]]);}}());(function(){var flattenAndCompact=function(ax){var rx=[];for(var i=0;i<ax.length;i++){if(ax[i]instanceof Array){rx=rx.concat(flattenAndCompact(ax[i]));}else{if(ax[i]){rx.push(ax[i]);}}}
return rx;};Date.Grammar={};Date.Translator={hour:function(s){return function(){this.hour=Number(s);};},minute:function(s){return function(){this.minute=Number(s);};},second:function(s){return function(){this.second=Number(s);};},meridian:function(s){return function(){this.meridian=s.slice(0,1).toLowerCase();};},timezone:function(s){return function(){var n=s.replace(/[^\d\+\-]/g,"");if(n.length){this.timezoneOffset=Number(n);}else{this.timezone=s.toLowerCase();}};},day:function(x){var s=x[0];return function(){this.day=Number(s.match(/\d+/)[0]);};},month:function(s){return function(){this.month=((s.length==3)?Date.getMonthNumberFromName(s):(Number(s)-1));};},year:function(s){return function(){var n=Number(s);this.year=((s.length>2)?n:(n+(((n+2000)<Date.CultureInfo.twoDigitYearMax)?2000:1900)));};},rday:function(s){return function(){switch(s){case"yesterday":this.days=-1;break;case"tomorrow":this.days=1;break;case"today":this.days=0;break;case"now":this.days=0;this.now=true;break;}};},finishExact:function(x){x=(x instanceof Array)?x:[x];var now=new Date();this.year=now.getFullYear();this.month=now.getMonth();this.day=1;this.hour=0;this.minute=0;this.second=0;for(var i=0;i<x.length;i++){if(x[i]){x[i].call(this);}}
this.hour=(this.meridian=="p"&&this.hour<13)?this.hour+12:this.hour;if(this.day>Date.getDaysInMonth(this.year,this.month)){throw new RangeError(this.day+" is not a valid value for days.");}
var r=new Date(this.year,this.month,this.day,this.hour,this.minute,this.second);if(this.timezone){r.set({timezone:this.timezone});}else if(this.timezoneOffset){r.set({timezoneOffset:this.timezoneOffset});}
return r;},finish:function(x){x=(x instanceof Array)?flattenAndCompact(x):[x];if(x.length===0){return null;}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 4445.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
(function(){Date.Parsing={Exception:function(s){this.message="Parse error at '"+s.substring(0,10)+" ...'";}};var $P=Date.Parsing;var _=$P.Operators={rtoken:function(r){return function(s){var mx=s.match(r);if(mx){return([mx[0],s.substring(mx[0].length)]);}else{throw new $P.Exception(s);}};},token:function(s){return function(s){return _.rtoken(new RegExp("^\s*"+s+"\s*"))(s);};},stoken:function(s){return _.rtoken(new RegExp("^"+s));},until:function(p){return function(s){var qx=[],rx=null;while(s.length){try{rx=p.call(this,s);}catch(e){qx.push(rx[0]);s=rx[1];continue;}
break;}
return[qx,s];};},many:function(p){return function(s){var rx=[],r=null;while(s.length){try{r=p.call(this,s);}catch(e){return[rx,s];}
rx.push(r[0]);s=r[1];}
return[rx,s];};},optional:function(p){return function(s){var r=null;try{r=p.call(this,s);}catch(e){return[null,s];}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 3086.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
(function(){Date.Parsing={Exception:function(s){this.message="Parse error at '"+s.substring(0,10)+" ...'";}};var $P=Date.Parsing;var _=$P.Operators={rtoken:function(r){return function(s){var mx=s.match(r);if(mx){return([mx[0],s.substring(mx[0].length)]);}else{throw new $P.Exception(s);}};},token:function(s){return function(s){return _.rtoken(new RegExp("^\s*"+s+"\s*"))(s);};},stoken:function(s){return _.rtoken(new RegExp("^"+s));},until:function(p){return function(s){var qx=[],rx=null;while(s.length){try{rx=p.call(this,s);}catch(e){qx.push(rx[0]);s=rx[1];continue;}
break;}
return[qx,s];};},many:function(p){return function(s){var rx=[],r=null;while(s.length){try{r=p.call(this,s);}catch(e){return[rx,s];}
rx.push(r[0]);s=r[1];}
return[rx,s];};},optional:function(p){return function(s){var r=null;try{r=p.call(this,s);}catch(e){return[null,s];}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 3086.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
(function(){Date.Parsing={Exception:function(s){this.message="Parse error at '"+s.substring(0,10)+" ...'";}};var $P=Date.Parsing;var _=$P.Operators={rtoken:function(r){return function(s){var mx=s.match(r);if(mx){return([mx[0],s.substring(mx[0].length)]);}else{throw new $P.Exception(s);}};},token:function(s){return function(s){return _.rtoken(new RegExp("^\s*"+s+"\s*"))(s);};},stoken:function(s){return _.rtoken(new RegExp("^"+s));},until:function(p){return function(s){var qx=[],rx=null;while(s.length){try{rx=p.call(this,s);}catch(e){qx.push(rx[0]);s=rx[1];continue;}
break;}
return[qx,s];};},many:function(p){return function(s){var rx=[],r=null;while(s.length){try{r=p.call(this,s);}catch(e){return[rx,s];}
rx.push(r[0]);s=r[1];}
return[rx,s];};},optional:function(p){return function(s){var r=null;try{r=p.call(this,s);}catch(e){return[null,s];}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 3086.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
File jquery.dataTables.js
has 6221 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*! DataTables 1.10.9
* ©2008-2015 SpryMedia Ltd - datatables.net/license
*/
/**
File jquery-2.0.3.js
has 6037 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*!
* jQuery JavaScript Library v2.0.3
* http://jquery.com/
*
* Includes Sizzle.js
File jquery-ui-1.8.13.custom.min.js
has 5496 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*!
* jQuery UI 1.8.13
*
* Copyright 2011, AUTHORS.txt (http://jqueryui.com/about)
* Dual licensed under the MIT or GPL Version 2 licenses.
Similar blocks of code found in 2 locations. Consider refactoring. Open
models = {
'crs.bav': {
'Meta': {'object_name': 'BAV'},
'data_record_id': ('django.db.models.fields.TextField', [], {}),
'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 1331.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
models = {
'crs.bav': {
'Meta': {'object_name': 'BAV'},
'data_record_id': ('django.db.models.fields.TextField', [], {}),
'id': ('django.db.models.fields.AutoField', [], {'primary_key': 'True'}),
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 1331.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
File jquery.js
has 4411 lines of code (exceeds 250 allowed). Consider refactoring. Open
/*!
* jQuery JavaScript Library v1.4.2
* http://jquery.com/
*
* Copyright 2010, John Resig
Similar blocks of code found in 2 locations. Consider refactoring. Open
function install(el, opts) {
var full = (el == window);
var msg = opts && opts.message !== undefined ? opts.message : undefined;
opts = $.extend({}, $.blockUI.defaults, opts || {});
opts.overlayCSS = $.extend({}, $.blockUI.defaults.overlayCSS, opts.overlayCSS || {});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 2018.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function install(el, opts) {
var full = (el == window);
var msg = opts && opts.message !== undefined ? opts.message : undefined;
opts = $.extend({}, $.blockUI.defaults, opts || {});
opts.overlayCSS = $.extend({}, $.blockUI.defaults.overlayCSS, opts.overlayCSS || {});
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 2018.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimeSpan = function (days, hours, minutes, seconds, milliseconds) {
var attrs = "days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 1902.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimeSpan = function (days, hours, minutes, seconds, milliseconds) {
var attrs = "days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 1902.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
var TimeSpan = function (days, hours, minutes, seconds, milliseconds) {
var attrs = "days hours minutes seconds milliseconds".split(/\s+/);
var gFn = function (attr) {
return function () {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 1902.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function dataTable
has 2113 lines of code (exceeds 25 allowed). Consider refactoring. Open
i.fn.dataTable = function (g) {
function l() {
this.fnRecordsTotal =
function () {
return this.oFeatures.bServerSide ? parseInt(this._iRecordsTotal, 10) : this.aiDisplayMaster.length
File knockout-latest.debug.js
has 3123 lines of code (exceeds 250 allowed). Consider refactoring. Open
// Knockout JavaScript library v3.0.0
// (c) Steven Sanderson - http://knockoutjs.com/
// License: MIT (http://www.opensource.org/licenses/mit-license.php)
(function(){
Similar blocks of code found in 2 locations. Consider refactoring. Open
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 738.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76