mattray/spiceweasel

View on GitHub

Showing 12 of 64 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          if role =~ /\*/ # wildcard support
            wildroles = Dir.glob("roles/#{role}")
            # remove anything not ending in .json or .rb
            wildroles.delete_if { |x| !x.end_with?(".rb", ".json") }
            Spiceweasel::Log.debug("found roles '#{wildroles}' for wildcard: #{role}")
Severity: Major
Found in lib/spiceweasel/roles.rb and 1 other location - About 1 hr to fix
lib/spiceweasel/environments.rb on lines 49..56

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          if env =~ /\*/ # wildcard support
            wildenvs = Dir.glob("environments/#{env}")
            # remove anything not ending in .json or .rb
            wildenvs.delete_if { |x| !x.end_with?(".rb", ".json") }
            Spiceweasel::Log.debug("found environments '#{wildenvs}' for wildcard: #{env}")
Severity: Major
Found in lib/spiceweasel/environments.rb and 1 other location - About 1 hr to fix
lib/spiceweasel/roles.rb on lines 55..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 49.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if opt =~ /^-i|^--identity-file/
          if opt =~ /^-i$|^--identity-file$/
            value = "-i"
          else
            opt.sub!(/-i/, "") if opt =~ /^-i/
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 366..373
lib/spiceweasel/nodes.rb on lines 381..388
lib/spiceweasel/nodes.rb on lines 396..403

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if opt =~ /^-P|^--ssh-password/
          if opt =~ /^-P$|^--ssh-password$/
            value = "-P"
          else
            opt.sub!(/-P/, "") if opt =~ /^-P/
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 351..358
lib/spiceweasel/nodes.rb on lines 366..373
lib/spiceweasel/nodes.rb on lines 396..403

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          parallel += "bundle exec knife #{provider}#{Spiceweasel::Config[:knife_options]} vm clone #{options}".gsub(/\{\{n\}\}/, "{}")
        else
          parallel += "knife #{provider}#{Spiceweasel::Config[:knife_options]} vm clone #{options}".gsub(/\{\{n\}\}/, "{}")
        end
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 293..296
lib/spiceweasel/nodes.rb on lines 299..302
lib/spiceweasel/nodes.rb on lines 311..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if opt =~ /^-p|^--ssh-port/
          if opt =~ /^-p$|^--ssh-port$/
            value = "-p"
          else
            opt.sub!(/-p/, "") if opt =~ /^-p/
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 351..358
lib/spiceweasel/nodes.rb on lines 366..373
lib/spiceweasel/nodes.rb on lines 381..388

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          parallel += "bundle exec knife #{provider}#{Spiceweasel::Config[:knife_options]} droplet create #{options}".gsub(/\{\{n\}\}/, "{}")
        else
          parallel += "knife #{provider}#{Spiceweasel::Config[:knife_options]} droplet create #{options}".gsub(/\{\{n\}\}/, "{}")
        end
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 287..290
lib/spiceweasel/nodes.rb on lines 293..296
lib/spiceweasel/nodes.rb on lines 311..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          parallel += "bundle exec knife #{provider}#{Spiceweasel::Config[:knife_options]} server create #{options}".gsub(/\{\{n\}\}/, "{}")
        else
          parallel += "knife #{provider}#{Spiceweasel::Config[:knife_options]} server create #{options}".gsub(/\{\{n\}\}/, "{}")
        end
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 287..290
lib/spiceweasel/nodes.rb on lines 293..296
lib/spiceweasel/nodes.rb on lines 299..302

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

          parallel += "bundle exec knife #{provider}#{Spiceweasel::Config[:knife_options]} vm create #{options}".gsub(/\{\{n\}\}/, "{}")
        else
          parallel += "knife #{provider}#{Spiceweasel::Config[:knife_options]} vm create #{options}".gsub(/\{\{n\}\}/, "{}")
        end
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 287..290
lib/spiceweasel/nodes.rb on lines 299..302
lib/spiceweasel/nodes.rb on lines 311..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        if opt =~ /^-G|^--ssh-gateway/
          if opt =~ /^-G$|^--ssh-gateway$/
            value = "-G"
          else
            opt.sub!(/-G/, "") if opt =~ /^-G/
Severity: Major
Found in lib/spiceweasel/nodes.rb and 3 other locations - About 35 mins to fix
lib/spiceweasel/nodes.rb on lines 351..358
lib/spiceweasel/nodes.rb on lines 381..388
lib/spiceweasel/nodes.rb on lines 396..403

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 36.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def create_command(*args)
      @create ||= []
      if bundler?
        args[0] = "bundle exec " + args[0]
        @create.push(Command.new(*args))
Severity: Minor
Found in lib/spiceweasel/command_helper.rb and 1 other location - About 25 mins to fix
lib/spiceweasel/command_helper.rb on lines 35..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def delete_command(*args)
      @delete ||= []
      if bundler?
        args[0] = "bundle exec " + args[0]
        @delete.push(Command.new(*args))
Severity: Minor
Found in lib/spiceweasel/command_helper.rb and 1 other location - About 25 mins to fix
lib/spiceweasel/command_helper.rb on lines 25..31

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 29.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language