Module has too many lines. [110/100] Open
module Danbooru
# for .diff
TAG_DEL = "<del>"
TAG_INS = "<ins>"
TAG_DEL_CLOSE = "</del>"
- Read upRead up
- Exclude checks
This cop checks if the length a module exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method http_get_streaming
has a Cognitive Complexity of 51 (exceeds 5 allowed). Consider refactoring. Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method has too many lines. [60/10] Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Assignment Branch Condition size for http_get_streaming is too high. [61.91/15] Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Assignment Branch Condition size for diff is too high. [56.04/15] Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
- Read upRead up
- Exclude checks
This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric
Method has too many lines. [37/10] Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
- Read upRead up
- Exclude checks
This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Method diff
has a Cognitive Complexity of 23 (exceeds 5 allowed). Consider refactoring. Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Cyclomatic complexity for http_get_streaming is too high. [19/6] Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
- Read upRead up
- Exclude checks
This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.
An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.
Perceived complexity for http_get_streaming is too high. [18/7] Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
- Read upRead up
- Exclude checks
This cop tries to produce a complexity score that's a measure of the
complexity the reader experiences when looking at a method. For that
reason it considers when
nodes as something that doesn't add as much
complexity as an if
or a &&
. Except if it's one of those special
case
/when
constructs where there's no expression after case
. Then
the cop treats it as an if
/elsif
/elsif
... and lets all the when
nodes count. In contrast to the CyclomaticComplexity cop, this cop
considers else
nodes as adding complexity.
Example:
def my_method # 1
if cond # 1
case var # 2 (0.8 + 4 * 0.2, rounded)
when 1 then func_one
when 2 then func_two
when 3 then func_three
when 4..10 then func_other
end
else # 1
do_something until a && b # 2
end # ===
end # 7 complexity points
Block has too many lines. [51/25] Open
loop do
url = Addressable::URI.parse(source)
url.host = url.normalized_host
unless url.scheme == "http" || url.scheme == "https"
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Method http_get_streaming
has 60 lines of code (exceeds 25 allowed). Consider refactoring. Open
def http_get_streaming(source, options = {}, &_block)
max_size = options[:max_size] || CONFIG["max_image_size"]
max_size = nil if max_size == 0 # unlimited
# Decode data: URLs.
Cyclomatic complexity for diff is too high. [10/6] Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
- Read upRead up
- Exclude checks
This cop checks that the cyclomatic complexity of methods is not higher than the configured maximum. The cyclomatic complexity is the number of linearly independent paths through a method. The algorithm counts decision points and adds one.
An if statement (or unless or ?:) increases the complexity by one. An else branch does not, since it doesn't add a decision point. The && operator (or keyword and) can be converted to a nested if statement, and ||/or is shorthand for a sequence of ifs, so they also add one. Loops can be said to have an exit condition, so they add one.
Perceived complexity for diff is too high. [10/7] Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
- Read upRead up
- Exclude checks
This cop tries to produce a complexity score that's a measure of the
complexity the reader experiences when looking at a method. For that
reason it considers when
nodes as something that doesn't add as much
complexity as an if
or a &&
. Except if it's one of those special
case
/when
constructs where there's no expression after case
. Then
the cop treats it as an if
/elsif
/elsif
... and lets all the when
nodes count. In contrast to the CyclomaticComplexity cop, this cop
considers else
nodes as adding complexity.
Example:
def my_method # 1
if cond # 1
case var # 2 (0.8 + 4 * 0.2, rounded)
when 1 then func_one
when 2 then func_two
when 3 then func_three
when 4..10 then func_other
end
else # 1
do_something until a && b # 2
end # ===
end # 7 complexity points
Method diff
has 37 lines of code (exceeds 25 allowed). Consider refactoring. Open
def diff(old, new)
pattern = Regexp.new('(?:<.+?>)|(?:\p{Word}+)|(?:[ \t]+)|(?:\r?\n)|(?:.+?)')
thisarr = old.scan(pattern)
otharr = new.scan(pattern)
Block has too many lines. [32/25] Open
http.start do
http.read_timeout = 10
headers = {
"User-Agent" => "#{CONFIG["app_name"]}/#{CONFIG["version"]}",
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Block has too many lines. [26/25] Open
diffs.reverse_each do |hunk|
newchange = hunk.max { |a, b| a.old_position <=> b.old_position }
newstart = newchange.old_position
oldstart = hunk.min { |a, b| a.old_position <=> b.old_position }.old_position
- Read upRead up
- Exclude checks
This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.
Use min_by(&:old_position)
instead of min { |a, b| a.old_position <=> b.old_position }
. Open
oldstart = hunk.min { |a, b| a.old_position <=> b.old_position }.old_position
- Read upRead up
- Exclude checks
This cop identifies places where sort { |a, b| a.foo <=> b.foo }
can be replaced by sort_by(&:foo)
.
This cop also checks max
and min
methods.
Example:
# bad
array.sort { |a, b| a.foo <=> b.foo }
array.max { |a, b| a.foo <=> b.foo }
array.min { |a, b| a.foo <=> b.foo }
array.sort { |a, b| a[:foo] <=> b[:foo] }
# good
array.sort_by(&:foo)
array.sort_by { |v| v.foo }
array.sort_by do |var|
var.foo
end
array.max_by(&:foo)
array.min_by(&:foo)
array.sort_by { |a| a[:foo] }
Use =~
in places where the MatchData
returned by #match
will not be used. Open
if url.request_uri.match /[^!*'();:@&=+$,\/?#\[\]ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\-_.~%]/
- Read upRead up
- Exclude checks
This cop identifies the use of Regexp#match
or String#match
, which
returns #<MatchData>
/nil
. The return value of =~
is an integral
index/nil
and is more performant.
Example:
# bad
do_something if str.match(/regex/)
while regex.match('str')
do_something
end
# good
method(str =~ /regex/)
return value unless regex =~ 'str'
Use max_by(&:old_position)
instead of max { |a, b| a.old_position <=> b.old_position }
. Open
newchange = hunk.max { |a, b| a.old_position <=> b.old_position }
- Read upRead up
- Exclude checks
This cop identifies places where sort { |a, b| a.foo <=> b.foo }
can be replaced by sort_by(&:foo)
.
This cop also checks max
and min
methods.
Example:
# bad
array.sort { |a, b| a.foo <=> b.foo }
array.max { |a, b| a.foo <=> b.foo }
array.min { |a, b| a.foo <=> b.foo }
array.sort { |a, b| a[:foo] <=> b[:foo] }
# good
array.sort_by(&:foo)
array.sort_by { |v| v.foo }
array.sort_by do |var|
var.foo
end
array.max_by(&:foo)
array.min_by(&:foo)
array.sort_by { |a| a[:foo] }
Use =~
in places where the MatchData
returned by #match
will not be used. Open
if chg.new_element.match(/^\r?\n$/)
- Read upRead up
- Exclude checks
This cop identifies the use of Regexp#match
or String#match
, which
returns #<MatchData>
/nil
. The return value of =~
is an integral
index/nil
and is more performant.
Example:
# bad
do_something if str.match(/regex/)
while regex.match('str')
do_something
end
# good
method(str =~ /regex/)
return value unless regex =~ 'str'
Use =~
in places where the MatchData
returned by #match
will not be used. Open
output[chg.old_position] = TAG_NEWLINE if chg.old_element.match(/^\r?\n$/)
- Read upRead up
- Exclude checks
This cop identifies the use of Regexp#match
or String#match
, which
returns #<MatchData>
/nil
. The return value of =~
is an integral
index/nil
and is more performant.
Example:
# bad
do_something if str.match(/regex/)
while regex.match('str')
do_something
end
# good
method(str =~ /regex/)
return value unless regex =~ 'str'
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
TAG_INS_CLOSE = "</ins>"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings inside interpolations. Open
"User-Agent" => "#{CONFIG["app_name"]}/#{CONFIG["version"]}",
- Read upRead up
- Exclude checks
This cop checks that quotes inside the string interpolation match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
result = "Tests #{success ? "PASS" : "FAIL"}"
# good
result = "Tests #{success ? 'PASS' : 'FAIL'}"
Example: EnforcedStyle: double_quotes
# bad
result = "Tests #{success ? 'PASS' : 'FAIL'}"
# good
result = "Tests #{success ? "PASS" : "FAIL"}"
Prefer to_s
over string interpolation. Open
output.insert(chg.old_position, "#{escape_html[chg.new_element]}")
- Read upRead up
- Exclude checks
This cop checks for strings that are just an interpolated expression.
Example:
# bad
"#{@var}"
# good
@var.to_s
# good if @var is already a String
@var
Freeze mutable objects assigned to constants. Open
TAG_BREAK = "<br>\n"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Use limit.zero?
instead of limit == 0
. Open
if limit == 0
- Read upRead up
- Exclude checks
This cop checks for usage of comparison operators (==
,
>
, <
) to test numbers as zero, positive, or negative.
These can be replaced by their respective predicate methods.
The cop can also be configured to do the reverse.
The cop disregards #nonzero?
as it its value is truthy or falsey,
but not true
and false
, and thus not always interchangeable with
!= 0
.
The cop ignores comparisons to global variables, since they are often
populated with objects which can be compared with integers, but are
not themselves Interger
polymorphic.
Example: EnforcedStyle: predicate (default)
# bad
foo == 0
0 > foo
bar.baz > 0
# good
foo.zero?
foo.negative?
bar.baz.positive?
Example: EnforcedStyle: comparison
# bad
foo.zero?
foo.negative?
bar.baz.positive?
# good
foo == 0
0 > foo
bar.baz > 0
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if newchange.action == "+"
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Freeze mutable objects assigned to constants. Open
TAG_INS = "<ins>"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
unless url.scheme == "http" || url.scheme == "https"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
url.port = url.scheme == "https" ? 443 : 80
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
"User-Agent" => "#{CONFIG["app_name"]}/#{CONFIG["version"]}",
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use the -> { ... }
lambda literal syntax for single line lambdas. Open
escape_html = lambda { |str| str.gsub(/&/, "&").gsub(/</, "<").gsub(/>/, ">") }
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
if url.scheme == "https"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Ambiguous regexp literal. Parenthesize the method arguments if it's surely a regexp literal, or add a whitespace to the right of the /
if it should be a division. Open
if url.request_uri.match /[^!*'();:@&=+$,\/?#\[\]ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\-_.~%]/
- Read upRead up
- Exclude checks
This cop checks for ambiguous regexp literals in the first argument of a method invocation without parentheses.
Example:
# bad
# This is interpreted as a method invocation with a regexp literal,
# but it could possibly be `/` method invocations.
# (i.e. `do_something./(pattern)./(i)`)
do_something /pattern/i
Example:
# good
# With parentheses, there's no ambiguity.
do_something(/pattern/i)
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
raise SocketError, "URL must be HTTP or HTTPS"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
source.sub!(match + "_m", match)
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
raise SocketError, "Too many redirects"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
when "-"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
output.insert((newstart == oldstart || newchange.action != "+") ? newstart + 1 : newstart, TAG_DEL_CLOSE)
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Omit parentheses for ternary conditions. Open
output.insert((newstart == oldstart || newchange.action != "+") ? newstart + 1 : newstart, TAG_DEL_CLOSE)
- Read upRead up
- Exclude checks
This cop checks for the presence of parentheses around ternary
conditions. It is configurable to enforce inclusion or omission of
parentheses using EnforcedStyle
. Omission is only enforced when
removing the parentheses won't cause a different behavior.
Example: EnforcedStyle: requirenoparentheses (default)
# bad
foo = (bar?) ? a : b
foo = (bar.baz?) ? a : b
foo = (bar && baz) ? a : b
# good
foo = bar? ? a : b
foo = bar.baz? ? a : b
foo = bar && baz ? a : b
Example: EnforcedStyle: require_parentheses
# bad
foo = bar? ? a : b
foo = bar.baz? ? a : b
foo = bar && baz ? a : b
# good
foo = (bar?) ? a : b
foo = (bar.baz?) ? a : b
foo = (bar && baz) ? a : b
Example: EnforcedStyle: requireparentheseswhen_complex
# bad
foo = (bar?) ? a : b
foo = (bar.baz?) ? a : b
foo = bar && baz ? a : b
# good
foo = bar? ? a : b
foo = bar.baz? ? a : b
foo = (bar && baz) ? a : b
Freeze mutable objects assigned to constants. Open
TAG_NEWLINE = "↲\n"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Use max_size.zero?
instead of max_size == 0
. Open
max_size = nil if max_size == 0 # unlimited
- Read upRead up
- Exclude checks
This cop checks for usage of comparison operators (==
,
>
, <
) to test numbers as zero, positive, or negative.
These can be replaced by their respective predicate methods.
The cop can also be configured to do the reverse.
The cop disregards #nonzero?
as it its value is truthy or falsey,
but not true
and false
, and thus not always interchangeable with
!= 0
.
The cop ignores comparisons to global variables, since they are often
populated with objects which can be compared with integers, but are
not themselves Interger
polymorphic.
Example: EnforcedStyle: predicate (default)
# bad
foo == 0
0 > foo
bar.baz > 0
# good
foo.zero?
foo.negative?
bar.baz.positive?
Example: EnforcedStyle: comparison
# bad
foo.zero?
foo.negative?
bar.baz.positive?
# good
foo == 0
0 > foo
bar.baz > 0
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
max_size = options[:max_size] || CONFIG["max_image_size"]
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if newchange.action == "+"
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
escape_html = lambda { |str| str.gsub(/&/, "&").gsub(/</, "<").gsub(/>/, ">") }
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Favor modifier unless
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
unless url.scheme == "http" || url.scheme == "https"
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
TAG_INS = "<ins>"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
escape_html = lambda { |str| str.gsub(/&/, "&").gsub(/</, "<").gsub(/>/, ">") }
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings inside interpolations. Open
"User-Agent" => "#{CONFIG["app_name"]}/#{CONFIG["version"]}",
- Read upRead up
- Exclude checks
This cop checks that quotes inside the string interpolation match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
result = "Tests #{success ? "PASS" : "FAIL"}"
# good
result = "Tests #{success ? 'PASS' : 'FAIL'}"
Example: EnforcedStyle: double_quotes
# bad
result = "Tests #{success ? 'PASS' : 'FAIL'}"
# good
result = "Tests #{success ? "PASS" : "FAIL"}"
Freeze mutable objects assigned to constants. Open
TAG_INS_CLOSE = "</ins>"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
unless url.scheme == "http" || url.scheme == "https"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
TAG_DEL_CLOSE = "</del>"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Freeze mutable objects assigned to constants. Open
TAG_DEL_CLOSE = "</del>"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Use %r
around regular expression. Open
if url.request_uri.match /[^!*'();:@&=+$,\/?#\[\]ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789\-_.~%]/
- Read upRead up
- Exclude checks
This cop enforces using // or %r around regular expressions.
Example: EnforcedStyle: slashes (default)
# bad
snake_case = %r{^[\dA-Z_]+$}
# bad
regex = %r{
foo
(bar)
(baz)
}x
# good
snake_case = /^[\dA-Z_]+$/
# good
regex = /
foo
(bar)
(baz)
/x
Example: EnforcedStyle: percent_r
# bad
snake_case = /^[\dA-Z_]+$/
# bad
regex = /
foo
(bar)
(baz)
/x
# good
snake_case = %r{^[\dA-Z_]+$}
# good
regex = %r{
foo
(bar)
(baz)
}x
Example: EnforcedStyle: mixed
# bad
snake_case = %r{^[\dA-Z_]+$}
# bad
regex = /
foo
(bar)
(baz)
/x
# good
snake_case = /^[\dA-Z_]+$/
# good
regex = %r{
foo
(bar)
(baz)
}x
Example: AllowInnerSlashes: false (default)
# If `false`, the cop will always recommend using `%r` if one or more
# slashes are found in the regexp string.
# bad
x =~ /home\//
# good
x =~ %r{home/}
Example: AllowInnerSlashes: true
# good
x =~ /home\//
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
headers["Referer"] = "http://www.pixiv.net"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
len = res["Content-Length"]
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
if newchange.action == "+"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
"Referer" => source
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
escape_html = lambda { |str| str.gsub(/&/, "&").gsub(/</, "<").gsub(/>/, ">") }
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
if hunk[0].action == "-"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
headers["Referer"] = "http://www.pixiv.net"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
when "+"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
TAG_DEL = "<del>"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
new_url = Addressable::URI.parse(res["location"])
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
if newchange.action == "+"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if limit == 0
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Freeze mutable objects assigned to constants. Open
TAG_DEL = "<del>"
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze