Sign upLogin

moleculer-go/moleculer

View on GitHub
Star

Showing 40 of 77 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (serviceCatalog *ServiceCatalog) updateActions(serviceMap map[string]interface{}, current *service.Service) ([]map[string]interface{}, []service.Action, []service.Action) {
    var updatedActions []map[string]interface{}
    var newActions, deletedActions []service.Action

    actions := serviceMap["actions"].(map[string]interface{})
Severity: Major
Found in registry/serviceCatalog.go and 1 other location - About 3 hrs to fix
registry/serviceCatalog.go on lines 188..212

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 296.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (serviceCatalog *ServiceCatalog) updateEvents(serviceMap map[string]interface{}, current *service.Service) ([]map[string]interface{}, []service.Event, []service.Event) {
    var updated []map[string]interface{}
    var newEvents, deletedEvents []service.Event

    events := serviceMap["events"].(map[string]interface{})
Severity: Major
Found in registry/serviceCatalog.go and 1 other location - About 3 hrs to fix
registry/serviceCatalog.go on lines 216..240

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 296.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]float64",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]float64)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]int64",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]int64)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 119..135
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]uint64",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]uint64)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 119..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]string",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]string)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 119..135
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]float32",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]float32)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 119..135
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]bool",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]bool)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 51..67
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 119..135
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

    arrayTransformer{
        "[]int",
        func(source *interface{}) []interface{} {
            sourceList := (*source).([]int)
            result := make([]interface{}, len(sourceList))
Severity: Major
Found in payload/arrayTransformers.go and 6 other locations - About 1 hr to fix
payload/arrayTransformers.go on lines 34..50
payload/arrayTransformers.go on lines 68..84
payload/arrayTransformers.go on lines 85..101
payload/arrayTransformers.go on lines 102..118
payload/arrayTransformers.go on lines 119..135
payload/arrayTransformers.go on lines 136..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 172.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    {
        match: func(obj interface{}) bool {
            _, valid := obj.(func(moleculer.Context) interface{})
            return valid
        },
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 976..987

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 169.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    {
        match: func(obj interface{}) bool {
            _, valid := obj.(func(moleculer.Payload) interface{})
            return valid
        },
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 948..959

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 169.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    {
        match: func(obj interface{}) bool {
            _, valid := obj.(func(moleculer.Context))
            return valid
        },
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 989..1001

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 156.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    {
        match: func(obj interface{}) bool {
            _, valid := obj.(func(moleculer.Payload))
            return valid
        },
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 961..973

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 156.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (broker *ServiceBroker) waitForNode(nodeID string) error {
    start := time.Now()
    for {
        if broker.registry.KnowNode(nodeID) {
            break
Severity: Major
Found in broker/broker.go and 1 other location - About 1 hr to fix
broker/broker.go on lines 384..398

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 149.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (broker *ServiceBroker) waitAction(action string) error {
    start := time.Now()
    for {
        if broker.registry.KnowAction(action) {
            break
Severity: Major
Found in broker/broker.go and 1 other location - About 1 hr to fix
broker/broker.go on lines 401..415

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 149.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    mapTransformer{
        "map[string]float32",
        func(source *interface{}) map[string]interface{} {
            result := make(map[string]interface{}, len((*source).(map[string]float32)))
            for key, value := range (*source).(map[string]float32) {
Severity: Major
Found in payload/mapTransformers.go and 5 other locations - About 1 hr to fix
payload/mapTransformers.go on lines 34..46
payload/mapTransformers.go on lines 47..59
payload/mapTransformers.go on lines 60..72
payload/mapTransformers.go on lines 73..85
payload/mapTransformers.go on lines 99..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    mapTransformer{
        "map[string]int",
        func(source *interface{}) map[string]interface{} {
            result := make(map[string]interface{}, len((*source).(map[string]int)))
            for key, value := range (*source).(map[string]int) {
Severity: Major
Found in payload/mapTransformers.go and 5 other locations - About 1 hr to fix
payload/mapTransformers.go on lines 34..46
payload/mapTransformers.go on lines 60..72
payload/mapTransformers.go on lines 73..85
payload/mapTransformers.go on lines 86..98
payload/mapTransformers.go on lines 99..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func chainStarted(service moleculer.ServiceSchema, mixin *moleculer.Mixin) moleculer.ServiceSchema {
    if mixin.Started != nil {
        svcHook := service.Started
        mixinHook := mixin.Started
        service.Started = func(ctx moleculer.BrokerContext, svc moleculer.ServiceSchema) {
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 280..292

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func chainStopped(service moleculer.ServiceSchema, mixin *moleculer.Mixin) moleculer.ServiceSchema {
    if mixin.Stopped != nil {
        svcHook := service.Stopped
        mixinHook := mixin.Stopped
        service.Stopped = func(ctx moleculer.BrokerContext, svc moleculer.ServiceSchema) {
Severity: Major
Found in service/service.go and 1 other location - About 1 hr to fix
service/service.go on lines 262..274

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    mapTransformer{
        "map[string]string",
        func(source *interface{}) map[string]interface{} {
            result := make(map[string]interface{}, len((*source).(map[string]string)))
            for key, value := range (*source).(map[string]string) {
Severity: Major
Found in payload/mapTransformers.go and 5 other locations - About 1 hr to fix
payload/mapTransformers.go on lines 47..59
payload/mapTransformers.go on lines 60..72
payload/mapTransformers.go on lines 73..85
payload/mapTransformers.go on lines 86..98
payload/mapTransformers.go on lines 99..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language