Sign upLogin

motom001/DoorPi

View on GitHub
Star
doorpi/action/SingleActions/ipsrpc_call_value.py

Summary

Maintainability
D
2 days
Test Coverage

Identical blocks of code found in 2 locations. Consider refactoring.
Open

def ips_rpc_create_config():
    config = {}
    config['webservice_url'] = doorpi.DoorPi().config.get('IP-Symcon', 'server')
    config['username'] = doorpi.DoorPi().config.get('IP-Symcon', 'username')
    config['password'] = doorpi.DoorPi().config.get('IP-Symcon', 'password')
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 1 other location - About 1 day to fix
doorpi/action/SingleActions/ipsrpc_setvalue.py on lines 14..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 124.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

def ips_rpc_fire(method, config, *parameters):
    payload = {
       "method": method,
       "params": parameters,
       "jsonrpc": config['jsonrpc'],
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 1 other location - About 4 hrs to fix
doorpi/action/SingleActions/ipsrpc_setvalue.py on lines 23..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

def ips_rpc_get_variable_type(key, config = None):
    if config is None: config = ips_rpc_create_config()
    response = ips_rpc_fire('IPS_GetVariable', config, key)
    return response.json['result']['VariableValue']['ValueType']
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 1 other location - About 2 hrs to fix
doorpi/action/SingleActions/ipsrpc_setvalue.py on lines 42..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

def get(parameters):
    parameter_list = parameters.split(',')
    if len(parameter_list) is not 1: return None

    key = int(parameter_list[0])
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 1 other location - About 2 hrs to fix
doorpi/action/SingleActions/sleep.py on lines 11..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

def ips_rpc_get_variable_value(key, config = None):
    if config is None: config = ips_rpc_create_config()
    response = ips_rpc_fire('GetValue', config, key)
    return response.json['result']
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 2 other locations - About 1 hr to fix
doorpi/action/SingleActions/ipsrpc_call_value.py on lines 37..40
doorpi/action/SingleActions/ipsrpc_setvalue.py on lines 37..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

def ips_rpc_check_variable_exists(key, config = None):
    if config is None: config = ips_rpc_create_config()
    response = ips_rpc_fire('IPS_VariableExists', config, key)
    return response.json['result']
Severity: Major
Found in doorpi/action/SingleActions/ipsrpc_call_value.py and 2 other locations - About 1 hr to fix
doorpi/action/SingleActions/ipsrpc_call_value.py on lines 47..50
doorpi/action/SingleActions/ipsrpc_setvalue.py on lines 37..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 48.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Module level import not at top of file
Open

from doorpi.action.base import SingleAction
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Expected 2 blank lines, found 1
Open

def ips_rpc_fire(method, config, *parameters):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Expected 2 blank lines, found 1
Open

def ips_rpc_get_variable_type(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Multiple statements on one line (colon)
Open

    if config is None: config = ips_rpc_create_config()
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Module level import not at top of file
Open

import json
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Expected 2 blank lines, found 1
Open

def ips_rpc_create_config():
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Module level import not at top of file
Open

import doorpi
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Module level import not at top of file
Open

from requests.auth import HTTPBasicAuth
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Line too long (111 > 79 characters)
Open

        if ips_rpc_check_variable_exists(key, config) is not True: raise Exception("var %s doesn't exist", key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

    config['webservice_url'] = doorpi.DoorPi().config.get('IP-Symcon', 'server')
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Unexpected spaces around keyword / parameter equals
Open

        headers = config['headers'],
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

        data = json.dumps(payload)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Expected 2 blank lines, found 1
Open

def ips_rpc_check_variable_exists(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Multiple statements on one line (colon)
Open

    if config is None: config = ips_rpc_create_config()
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Line too long (81 > 79 characters)
Open

    config['jsonrpc'] = doorpi.DoorPi().config.get('IP-Symcon', 'jsonrpc', '2.0')
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Module level import not at top of file
Open

import requests
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Unexpected spaces around keyword / parameter equals
Open

        auth = HTTPBasicAuth(config['username'], config['password']),
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Multiple statements on one line (colon)
Open

    if config is None: config = ips_rpc_create_config()
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_get_variable_value(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Expected 2 blank lines, found 1
Open

def ips_rpc_call_phonenumber_from_variable(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Expected 2 blank lines, found 1
Open

def get(parameters):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Unexpected spaces around keyword / parameter equals
Open

        headers = config['headers'],
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_get_variable_type(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

        data = json.dumps(payload)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

        auth = HTTPBasicAuth(config['username'], config['password']),
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Expected 2 blank lines, found 1
Open

def ips_rpc_get_variable_value(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Line too long (91 > 79 characters)
Open

        elif type is not 3: raise Exception("phonenumber from var %s is not a string", key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_check_variable_exists(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_get_variable_type(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Multiple statements on one line (colon)
Open

        if config is None: config = ips_rpc_create_config()
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_check_variable_exists(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_call_phonenumber_from_variable(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Line too long (95 > 79 characters)
Open

    return IpsRpcCallPhonenumberFromVariableAction(ips_rpc_call_phonenumber_from_variable, key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_get_variable_value(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Unexpected spaces around keyword / parameter equals
Open

def ips_rpc_call_phonenumber_from_variable(key, config = None):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Don't use spaces around the '=' sign in function arguments.

Don't use spaces around the '=' sign when used to indicate a
keyword argument or a default parameter value, except when
using a type annotation.

Okay: def complex(real, imag=0.0):
Okay: return magic(r=real, i=imag)
Okay: boolean(a == b)
Okay: boolean(a != b)
Okay: boolean(a <= b)
Okay: boolean(a >= b)
Okay: def foo(arg: int = 42):
Okay: async def foo(arg: int = 42):

E251: def complex(real, imag = 0.0):
E251: return magic(r = real, i = imag)
E252: def complex(real, image: float=0.0):

Multiple statements on one line (colon)
Open

        if ips_rpc_check_variable_exists(key, config) is not True: raise Exception("var %s doesn't exist", key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Multiple statements on one line (colon)
Open

        if type is None: raise Exception("type of var %s couldn't find", key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Multiple statements on one line (colon)
Open

        elif type is not 3: raise Exception("phonenumber from var %s is not a string", key)
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Multiple statements on one line (colon)
Open

    if len(parameter_list) is not 1: return None
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Compound statements (on the same line) are generally discouraged.

While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!

Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.

Okay: if foo == 'blah':\n    do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()

E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four();  # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x

Expected 2 blank lines, found 1
Open

class IpsRpcCallPhonenumberFromVariableAction(SingleAction):
Severity: Minor
Found in doorpi/action/SingleActions/ipsrpc_call_value.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

There are no issues that match your filters.

Category
Status