motom001/DoorPi

View on GitHub
doorpi/sipphone/pjsua_lib/Recorder.py

Summary

Maintainability
A
3 hrs
Test Coverage

Similar blocks of code found in 6 locations. Consider refactoring.
Open

            if not os.path.exists(os.path.dirname(self.__last_record_filename)):
                logger.info('Path %s not exists - create it now', os.path.dirname(self.__last_record_filename))
                os.makedirs(os.path.dirname(self.__last_record_filename))
Severity: Major
Found in doorpi/sipphone/pjsua_lib/Recorder.py and 5 other locations - About 3 hrs to fix
doorpi/keyboard/from_filesystem.py on lines 45..47
doorpi/keyboard/from_filesystem.py on lines 49..51
doorpi/sipphone/linphone_lib/Player.py on lines 34..36
doorpi/sipphone/linphone_lib/Recorder.py on lines 58..60
doorpi/sipphone/pjsua_lib/Player.py on lines 32..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Module level import not at top of file
Open

import os
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Line too long (87 > 79 characters)
Open

            self.__last_record_filename = DoorPi().parse_string(self.__record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

            if not os.path.exists(os.path.dirname(self.__last_record_filename)):
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (89 > 79 characters)
Open

            logger.debug('no recorder found in config at section DoorPi and key records')
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

            DoorPi().event_handler.register_action('OnCallStateConnect', self.start)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (111 > 79 characters)
Open

                logger.info('Path %s not exists - create it now', os.path.dirname(self.__last_record_filename))
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (96 > 79 characters)
Open

                                                     '!BASEPATH!/records/%Y-%m-%d_%H-%M-%S.wav')
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (124 > 79 characters)
Open

            logger.trace('recorder already created as rec_id %s and record to %s', self.__rec_id, self.last_record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

            DoorPi().event_handler.register_action('OnSipPhoneMakeCall', self.start)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (81 > 79 characters)
Open

            logger.debug('stopping recording to %s', self.__last_record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (94 > 79 characters)
Open

            self.__rec_id = DoorPi().sipphone.lib.create_recorder(self.__last_record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Expected 2 blank lines, found 1
Open

class PjsuaRecorder(RecorderAbstractBaseClass):
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Separate top-level function and class definitions with two blank lines.

Method definitions inside a class are separated by a single blank
line.

Extra blank lines may be used (sparingly) to separate groups of
related functions.  Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).

Use blank lines in functions, sparingly, to indicate logical
sections.

Okay: def a():\n    pass\n\n\ndef b():\n    pass
Okay: def a():\n    pass\n\n\nasync def b():\n    pass
Okay: def a():\n    pass\n\n\n# Foo\n# Bar\n\ndef b():\n    pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1

E301: class Foo:\n    b = 0\n    def bar():\n        pass
E302: def a():\n    pass\n\ndef b(n):\n    pass
E302: def a():\n    pass\n\nasync def b(n):\n    pass
E303: def a():\n    pass\n\n\n\ndef b(n):\n    pass
E303: def a():\n\n\n\n    pass
E304: @decorator\n\ndef a():\n    pass
E305: def a():\n    pass\na()
E306: def a():\n    def b():\n        pass\n    def c():\n        pass

Line too long (90 > 79 characters)
Open

    def parsed_record_filename(self): return DoorPi().parse_string(self.__record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (81 > 79 characters)
Open

            logger.debug('starting recording to %s', self.__last_record_filename)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Module level import not at top of file
Open

from doorpi.sipphone.AbstractBaseClass import RecorderAbstractBaseClass
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Line too long (82 > 79 characters)
Open

        DoorPi().event_handler.register_action('OnCallStateDisconnect', self.stop)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

No newline at end of file
Open

            DoorPi().event_handler('OnRecorderStopped', __name__)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Trailing blank lines are superfluous.

Okay: spam(1)
W391: spam(1)\n

However the last line should end with a new line (warning W292).

Module level import not at top of file
Open

from doorpi import DoorPi
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Place imports at the top of the file.

Always put imports at the top of the file, just after any module
comments and docstrings, and before module globals and constants.

Okay: import os
Okay: # this is a comment\nimport os
Okay: '''this is a module docstring'''\nimport os
Okay: r'''this is a module docstring'''\nimport os
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nelse:\n\tpass\nimport y
Okay:
try:\n\timport x\nexcept ImportError:\n\tpass\nfinally:\n\tpass\nimport y
E402: a=1\nimport os
E402: 'One string'\n"Two string"\nimport os
E402: a=1\nfrom sys import x

Okay: if x:\n    import os

Line too long (87 > 79 characters)
Open

        if DoorPi().config.get_bool('DoorPi', 'record_while_dialing', 'False') is True:
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

            self.__slot_id = DoorPi().sipphone.lib.recorder_get_slot(self.__rec_id)
Severity: Minor
Found in doorpi/sipphone/pjsua_lib/Recorder.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

There are no issues that match your filters.

Category
Status