oglimmer/citybuilder

View on GitHub

Showing 75 of 157 total issues

Similar blocks of code found in 10 locations. Consider refactoring.
Open

function BuildRestaurantUSFF1Card(id) {
    this.Inherits(BuildRestaurantCard,id,8,2,[ {ht:[6,8], pro:7}, {ht:[9,10], pro:12} ], 0);
}
Severity: Major
Found in server/cards/card_restaurantcards.js and 9 other locations - About 1 hr to fix
server/cards/card_clothingcards.js on lines 27..29
server/cards/card_clothingcards.js on lines 51..53
server/cards/card_clothingcards.js on lines 75..77
server/cards/card_groceriescards.js on lines 35..37
server/cards/card_groceriescards.js on lines 59..61
server/cards/card_jewelerycards.js on lines 19..21
server/cards/card_restaurantcards.js on lines 43..45
server/cards/card_restaurantcards.js on lines 51..53
server/cards/card_restaurantcards.js on lines 91..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

function BuildGroceriesDisc2Card(id) {
    this.Inherits(BuildGroceriesCard,id,102,1,[ {ht:[4,8], pro:30}, {ht:[9,10], pro:5} ], 0);
}
Severity: Major
Found in server/cards/card_groceriescards.js and 9 other locations - About 1 hr to fix
server/cards/card_clothingcards.js on lines 27..29
server/cards/card_clothingcards.js on lines 51..53
server/cards/card_clothingcards.js on lines 75..77
server/cards/card_groceriescards.js on lines 59..61
server/cards/card_jewelerycards.js on lines 19..21
server/cards/card_restaurantcards.js on lines 43..45
server/cards/card_restaurantcards.js on lines 51..53
server/cards/card_restaurantcards.js on lines 83..85
server/cards/card_restaurantcards.js on lines 91..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

function BuildGroceriesBioSmCard(id) {
    this.Inherits(BuildGroceriesCard,id,105,2,[ {ht:[1,2], pro:300}, {ht:[3,5], pro:80} ], 10);
}
Severity: Major
Found in server/cards/card_groceriescards.js and 9 other locations - About 1 hr to fix
server/cards/card_clothingcards.js on lines 27..29
server/cards/card_clothingcards.js on lines 51..53
server/cards/card_clothingcards.js on lines 75..77
server/cards/card_groceriescards.js on lines 35..37
server/cards/card_jewelerycards.js on lines 19..21
server/cards/card_restaurantcards.js on lines 43..45
server/cards/card_restaurantcards.js on lines 51..53
server/cards/card_restaurantcards.js on lines 83..85
server/cards/card_restaurantcards.js on lines 91..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

function BuildClothingLux1Card(id) {
    this.Inherits(BuildClothingCard,id,204,1,[ {ht:[1,2], pro:100}, {ht:[3,6], pro:35} ],5);
}
Severity: Major
Found in server/cards/card_clothingcards.js and 9 other locations - About 1 hr to fix
server/cards/card_clothingcards.js on lines 27..29
server/cards/card_clothingcards.js on lines 75..77
server/cards/card_groceriescards.js on lines 35..37
server/cards/card_groceriescards.js on lines 59..61
server/cards/card_jewelerycards.js on lines 19..21
server/cards/card_restaurantcards.js on lines 43..45
server/cards/card_restaurantcards.js on lines 51..53
server/cards/card_restaurantcards.js on lines 83..85
server/cards/card_restaurantcards.js on lines 91..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 10 locations. Consider refactoring.
Open

function BuildRestaurantUSFF2Card(id) {
    this.Inherits(BuildRestaurantCard,id,9,2,[ {ht:[5,8], pro:5}, {ht:[9,10], pro:13} ], 0);
}
Severity: Major
Found in server/cards/card_restaurantcards.js and 9 other locations - About 1 hr to fix
server/cards/card_clothingcards.js on lines 27..29
server/cards/card_clothingcards.js on lines 51..53
server/cards/card_clothingcards.js on lines 75..77
server/cards/card_groceriescards.js on lines 35..37
server/cards/card_groceriescards.js on lines 59..61
server/cards/card_jewelerycards.js on lines 19..21
server/cards/card_restaurantcards.js on lines 43..45
server/cards/card_restaurantcards.js on lines 51..53
server/cards/card_restaurantcards.js on lines 83..85

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 60.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function AddCriminals2Card(id) {
    this.Inherits(BuildCriminalCard,id,801,2,[ {ht:[7,8], pro:15}, {ht:[9,10], pro:2} ], -55);
}
Severity: Major
Found in server/cards/card_criminalcards.js and 1 other location - About 1 hr to fix
server/cards/card_criminalcards.js on lines 70..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

var HouseTypeMaxPop = {
    GHETTO_TOWER : 240,
    CHARITY_BUILDING : 60,
    LARGE_APARTMENT_TOWER : 240,
    SMALL_APARTMENT_TOWER : 60,
Severity: Major
Found in server/rule_defines.js and 1 other location - About 1 hr to fix
server/rule_defines.js on lines 38..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function AddCriminals3Card(id) {
    this.Inherits(BuildCriminalCard,id,802,2,[ {ht:[1,2], pro:1500}, {ht:[3,4], pro:200} ], -5);
}
Severity: Major
Found in server/cards/card_criminalcards.js and 1 other location - About 1 hr to fix
server/cards/card_criminalcards.js on lines 46..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

var HouseType = {
    GHETTO_TOWER : 10,
    CHARITY_BUILDING : 9,
    LARGE_APARTMENT_TOWER : 8,
    SMALL_APARTMENT_TOWER : 7,
Severity: Major
Found in server/rule_defines.js and 1 other location - About 1 hr to fix
server/rule_defines.js on lines 64..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 58.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        ctx.fillText(firstLine,relocateX+this.drawX+26-ctx.measureText(firstLine).width/2,relocateY+this.drawY+20);
Severity: Major
Found in client/game/UIElement.js and 1 other location - About 1 hr to fix
client/game/UIElement.js on lines 70..70

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        ctx.fillText(secondLine,relocateX+this.drawX+26-ctx.measureText(secondLine).width/2,relocateY+this.drawY+38);
Severity: Major
Found in client/game/UIElement.js and 1 other location - About 1 hr to fix
client/game/UIElement.js on lines 68..68

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            for(var j = 0 ; j < this.currentHighlight.length ; j++) {
                this.currentHighlight[j].fillStyleH = null;
                this.currentHighlight[j].draw(G.ctx, this.relocateX, this.relocateY);
            }
Severity: Major
Found in client/game/FieldPane.js and 1 other location - About 1 hr to fix
client/game/FieldPane.js on lines 112..115

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                for(var j = 0 ; j < this.currentHighlight.length ; j++) {
                    this.currentHighlight[j].fillStyleH = null;
                    this.currentHighlight[j].draw(G.ctx, this.relocateX, this.relocateY);
                }
Severity: Major
Found in client/game/FieldPane.js and 1 other location - About 1 hr to fix
client/game/FieldPane.js on lines 144..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function BuildGroceriesBioLrgCard(id) {
    this.Inherits(BuildGroceriesCard,id,106,2,[ {ht:[1,3], pro:250}, {ht:[4,7], pro:75} ], 0);
}
Severity: Major
Found in server/cards/card_groceriescards.js and 1 other location - About 1 hr to fix
server/cards/card_restaurantcards.js on lines 99..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

function BuildRestaurantUSFF3Card(id) {
    this.Inherits(BuildRestaurantCard,id,10,3,[ {ht:[6,8], pro:7}, {ht:[9,10], pro:12} ], 0);
}
Severity: Major
Found in server/cards/card_restaurantcards.js and 1 other location - About 1 hr to fix
server/cards/card_groceriescards.js on lines 67..69

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 56.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

            logger.debug("[NewPeopleCard] Changed houseType for " + field.x+","+field.y+" from "+oldHouseType+" to "+field.attachedCard.houseType);
Severity: Major
Found in server/cards/card_other.js and 3 other locations - About 1 hr to fix
server/cards/card_other.js on lines 43..43
server/cards/card_other.js on lines 83..83
server/rule_field.js on lines 57..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

            logger.debug("[MorePopulationCard] Field "+field.x+","+field.y+" gained "+rand+" to now "+field.attachedCard.housePopulation);    
Severity: Major
Found in server/cards/card_other.js and 3 other locations - About 1 hr to fix
server/cards/card_other.js on lines 43..43
server/cards/card_other.js on lines 185..185
server/rule_field.js on lines 57..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

            logger.debug("[GentrificationCard] Changed houseType for " + field.x+","+field.y+" from "+oldHouseType+" to "+field.attachedCard.houseType);
Severity: Major
Found in server/cards/card_other.js and 3 other locations - About 1 hr to fix
server/cards/card_other.js on lines 83..83
server/cards/card_other.js on lines 185..185
server/rule_field.js on lines 57..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    $("#gameCanvas").attr('width', $(window).width()-225).attr('height', $(window).height()-35);
Severity: Major
Found in client/game/global_scope.js and 1 other location - About 1 hr to fix
client/game/GlobalListeners.js on lines 70..70

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        logger.debug("[Field.socialChange] Changed houseType for " + field.x+","+field.y+" from "+oldHouseType+" to "+field.attachedCard.houseType);
Severity: Major
Found in server/rule_field.js and 3 other locations - About 1 hr to fix
server/cards/card_other.js on lines 43..43
server/cards/card_other.js on lines 83..83
server/cards/card_other.js on lines 185..185

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language