Sign upLogin

phodal/chapi

View on GitHub
Star

Showing 388 of 390 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun `should identify kt file`() {
        val code = """
// this is a kotlin file            
"""
Severity: Major
Found in chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt and 2 other locations - About 50 mins to fix
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 22..30
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 32..40

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (functionOnly) {
            defaultNode.NodeName = "default"
            defaultNode.FilePath = codeContainer.FullName
            defaultNode.Package = codeContainer.PackageName
            codeContainer.DataStructures += defaultNode
Severity: Minor
Found in chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListener.kt and 1 other location - About 50 mins to fix
chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListener.kt on lines 1075..1080

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        } else if (fieldOnly) {
            defaultNode.NodeName = "default"
            defaultNode.FilePath = codeContainer.FullName
            defaultNode.Package = codeContainer.PackageName
            codeContainer.DataStructures += defaultNode
Severity: Minor
Found in chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListener.kt and 1 other location - About 50 mins to fix
chapi-ast-typescript/src/main/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListener.kt on lines 1070..1075

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        val code = """
import request from 'umi-request';

export function demo() {
  return request
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 3 other locations - About 50 mins to fix
chapi-ast-csharp/src/test/kotlin/chapi/ast/csharpast/CSharpAstListenerTest.kt on lines 323..333
chapi-ast-java/src/test/kotlin/chapi/ast/javaast/JavaFullIdentListenerTest.kt on lines 111..123
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 125..138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        val code = """
using System; 
  
namespace Chapi { 
    public class Chapi {
Severity: Major
Found in chapi-ast-csharp/src/test/kotlin/chapi/ast/csharpast/CSharpAstListenerTest.kt and 3 other locations - About 50 mins to fix
chapi-ast-java/src/test/kotlin/chapi/ast/javaast/JavaFullIdentListenerTest.kt on lines 111..123
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 125..138
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 618..631

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

        val code = """
package hello;

public class JavaCallApp {
    private JavaDaoParser daoParser;
Severity: Major
Found in chapi-ast-java/src/test/kotlin/chapi/ast/javaast/JavaFullIdentListenerTest.kt and 3 other locations - About 50 mins to fix
chapi-ast-csharp/src/test/kotlin/chapi/ast/csharpast/CSharpAstListenerTest.kt on lines 323..333
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt on lines 125..138
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 618..631

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

            val code = """
package chapi.ast.kotlinast

import hello.Human
Severity: Major
Found in chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinBasicIdentListenerTest.kt and 3 other locations - About 50 mins to fix
chapi-ast-csharp/src/test/kotlin/chapi/ast/csharpast/CSharpAstListenerTest.kt on lines 323..333
chapi-ast-java/src/test/kotlin/chapi/ast/javaast/JavaFullIdentListenerTest.kt on lines 111..123
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 618..631

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 79.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun thisIsInObjectType() {
        val code = """
interface SingularData {
  isNode(): this is NodeSingular;
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 50 mins to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1147..1155
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1213..1222

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun supportForGenericMap() {
        val code = """
export type Model<T extends keyof typeof models> = {
  [key in keyof typeof models]: ReturnType<typeof models[T]>;
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 50 mins to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1137..1145
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1147..1155

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Test
    internal fun isAsFunctionName() {
        val code = """
interface SingularData {
   is(selector: Selector): boolean;
Severity: Major
Found in chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt and 2 other locations - About 50 mins to fix
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1137..1145
chapi-ast-typescript/src/test/kotlin/chapi/ast/typescriptast/TypeScriptFullIdentListenerTest.kt on lines 1213..1222

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        val outputs = functionCalls.joinToString("\n") {
            "${it.NodeName} -> ${it.FunctionName} -> ${it.OriginNodeName}"
        }
Severity: Minor
Found in chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt and 1 other location - About 45 mins to fix
chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt on lines 543..545

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            currentFunction = createFunction(
                returnType,
                annotations,
                currentStruct.Package,
                modifiers,
Severity: Major
Found in chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt and 2 other locations - About 45 mins to fix
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 33..40
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 77..84

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            currentFunction = createFunction(
                returnType,
                annotations,
                currentStruct.Package,
                modifiers,
Severity: Major
Found in chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt and 2 other locations - About 45 mins to fix
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 33..40
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 65..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        val outputs = functionCalls.joinToString("\n") {
            "${it.NodeName} -> ${it.FunctionName} -> ${it.OriginNodeName}"
        }
Severity: Minor
Found in chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt and 1 other location - About 45 mins to fix
chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt on lines 584..586

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

                currentFunction = createFunction(
                    returnType,
                    annotations,
                    currentStruct.Package,
                    modifiers,
Severity: Major
Found in chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt and 2 other locations - About 45 mins to fix
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 65..72
chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpFullIdentListener.kt on lines 77..84

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

        val code = """
        class Entity
        {
        public:
            int Id;
Severity: Major
Found in chapi-ast-cpp/src/test/kotlin/chapi/ast/cppast/CPPBasicIdentListenerTest.kt and 5 other locations - About 45 mins to fix
chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinFunctionCallTest.kt on lines 47..55
chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt on lines 454..464
chapi-domain/src/test/kotlin/chapi/domain/core/CodeDataStructTest.kt on lines 83..93
chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 57..63
chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 99..105

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method createFunction has 6 arguments (exceeds 4 allowed). Consider refactoring.
Open

        returnType: String,
        annotations: List<CodeAnnotation>,
        packageName: String,
        modifiers: List<String>,
        methodName: String,
Severity: Minor
Found in chapi-ast-csharp/src/main/kotlin/chapi/ast/csharpast/CSharpAstListener.kt - About 45 mins to fix

    Similar blocks of code found in 6 locations. Consider refactoring.
    Open

            val tomlCode = """
            [database]
            enabled = true
            ports = [ 8000, 8001, 8002 ]
            data = [ ["delta", "phi"], [3.14] ]
    Severity: Major
    Found in chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt and 5 other locations - About 45 mins to fix
    chapi-ast-cpp/src/test/kotlin/chapi/ast/cppast/CPPBasicIdentListenerTest.kt on lines 80..90
    chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinFunctionCallTest.kt on lines 47..55
    chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt on lines 454..464
    chapi-domain/src/test/kotlin/chapi/domain/core/CodeDataStructTest.kt on lines 83..93
    chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 99..105

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 6 locations. Consider refactoring.
    Open

            val tomlCode = """
            [database]
            enabled = true
            ports = [ 8000, 8001, 8002 ]
            data = [ ["delta", "phi"], [3.14] ]
    Severity: Major
    Found in chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt and 5 other locations - About 45 mins to fix
    chapi-ast-cpp/src/test/kotlin/chapi/ast/cppast/CPPBasicIdentListenerTest.kt on lines 80..90
    chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinFunctionCallTest.kt on lines 47..55
    chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt on lines 454..464
    chapi-domain/src/test/kotlin/chapi/domain/core/CodeDataStructTest.kt on lines 83..93
    chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 57..63

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 6 locations. Consider refactoring.
    Open

            val code = """
            #[cfg(test)]
            mod tests {
                use super::*;
    Severity: Major
    Found in chapi-ast-rust/src/test/kotlin/chapi/ast/rustast/RustFullIdentListenerTest.kt and 5 other locations - About 45 mins to fix
    chapi-ast-cpp/src/test/kotlin/chapi/ast/cppast/CPPBasicIdentListenerTest.kt on lines 80..90
    chapi-ast-kotlin/src/test/kotlin/chapi/ast/kotlinast/KotlinFunctionCallTest.kt on lines 47..55
    chapi-domain/src/test/kotlin/chapi/domain/core/CodeDataStructTest.kt on lines 83..93
    chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 57..63
    chapi-parser-toml/src/test/kotlin/chapi/parser/toml/TomlAnalyserTest.kt on lines 99..105

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 75.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Severity
    Category
    Status
    Source
    Language