Showing 115 of 115 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        String s = "# argument\n" +
                "#     : test (comp_for | ASSIGN test)?\n" +
                "#     | (POWER | STAR) test\n" +
                "#     ;\n" +
                "\n" +
docs/compare/src/test/java/com/compare/PythonIdentAppTest.java on lines 58..82

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        String s = "# try_stmt: TRY COLON suite (except_clause+ else_clause? finaly_clause? | finaly_clause)\n" +
                "\n" +
                "# TRY COLON suite except_clause\n" +
                "try:\n" +
                "    pass\n" +
docs/compare/src/test/java/com/compare/PythonIdentAppTest.java on lines 17..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func Test_InnerClass(t *testing.T) {
    g := NewGomegaWithT(t)

    codePath := "../../../../_fixtures/grammar/java/regression/InnerClass.java"
    codePath = filepath.FromSlash(codePath)
Severity: Major
Found in pkg/application/analysis/javaapp/java_full_app_test.go and 1 other location - About 1 hr to fix
pkg/application/analysis/javaapp/java_full_app_test.go on lines 254..265

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 155.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func Test_InnerJavaClass(t *testing.T) {
    g := NewGomegaWithT(t)

    codePath := "../../../../_fixtures/grammar/java/regression/JavaInner.java"
    codePath = filepath.FromSlash(codePath)
Severity: Major
Found in pkg/application/analysis/javaapp/java_full_app_test.go and 1 other location - About 1 hr to fix
pkg/application/analysis/javaapp/java_full_app_test.go on lines 228..239

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 155.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *JavaRefactorListener) EnterLambdaParameters(ctx *LambdaParametersContext) {
    identifiers := ctx.AllIDENTIFIER()
    for index := range identifiers {
        context := ctx.IDENTIFIER(index)
        name := context.GetText()
Severity: Major
Found in pkg/application/refactor/base/java_refactor_listener.go and 2 other locations - About 1 hr to fix
pkg/application/refactor/base/java_refactor_listener.go on lines 85..96
pkg/application/refactor/base/java_refactor_listener.go on lines 153..164

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 152.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *JavaRefactorListener) EnterClassOrInterfaceType(ctx *ClassOrInterfaceTypeContext) {
    identifiers := ctx.AllIDENTIFIER()
    for index := range identifiers {
        context := ctx.IDENTIFIER(index)
        name := context.GetText()
Severity: Major
Found in pkg/application/refactor/base/java_refactor_listener.go and 2 other locations - About 1 hr to fix
pkg/application/refactor/base/java_refactor_listener.go on lines 108..119
pkg/application/refactor/base/java_refactor_listener.go on lines 153..164

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 152.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (s *JavaRefactorListener) EnterCreatedName(ctx *CreatedNameContext) {
    identifiers := ctx.AllIDENTIFIER()
    for index := range identifiers {
        context := ctx.IDENTIFIER(index)
        name := context.GetText()
Severity: Major
Found in pkg/application/refactor/base/java_refactor_listener.go and 2 other locations - About 1 hr to fix
pkg/application/refactor/base/java_refactor_listener.go on lines 85..96
pkg/application/refactor/base/java_refactor_listener.go on lines 108..119

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 152.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if cmd.Flag("team").Value.String() == "true" {
            teamSummary := GetTeamSummary(commitMessages)
            table.SetHeader([]string{"EntityName", "RevsCount", "AuthorCount"})

            if len(teamSummary) > size && isFullMessage {
Severity: Major
Found in cmd/git.go and 1 other location - About 1 hr to fix
cmd/git.go on lines 89..100

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 149.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if cmd.Flag("top").Value.String() == "true" {
            authors := GetTopAuthors(commitMessages)
            table.SetHeader([]string{"Author", "CommitCount", "LineCount"})

            if len(authors) > size && isFullMessage {
Severity: Major
Found in cmd/git.go and 1 other location - About 1 hr to fix
cmd/git.go on lines 55..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 149.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func TestTbsApp_IgnoreTest(t *testing.T) {
    g := NewGomegaWithT(t)
    codePath := "../../../_fixtures/tbs/usecases/IgnoreTest.java"
    codePath = filepath.FromSlash(codePath)

Severity: Major
Found in pkg/application/tbs/tbs_app_test.go and 2 other locations - About 1 hr to fix
pkg/application/analysis/javaapp/java_full_app_test.go on lines 241..252
pkg/application/tbs/tbs_app_test.go on lines 59..69

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func TestTbsApp_DuplicateAssertTest(t *testing.T) {
    g := NewGomegaWithT(t)
    codePath := "../../../_fixtures/tbs/usecases/DuplicateAssertTest.java"
    codePath = filepath.FromSlash(codePath)

Severity: Major
Found in pkg/application/tbs/tbs_app_test.go and 2 other locations - About 1 hr to fix
pkg/application/analysis/javaapp/java_full_app_test.go on lines 241..252
pkg/application/tbs/tbs_app_test.go on lines 25..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func Test_DoubleClass(t *testing.T) {
    g := NewGomegaWithT(t)

    codePath := "../../../../_fixtures/grammar/java/regression/DoubleClass.java"
    codePath = filepath.FromSlash(codePath)
Severity: Major
Found in pkg/application/analysis/javaapp/java_full_app_test.go and 2 other locations - About 1 hr to fix
pkg/application/tbs/tbs_app_test.go on lines 25..35
pkg/application/tbs/tbs_app_test.go on lines 59..69

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method testTryStmt has 32 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    @Test
    void testTryStmt() {
        String s = "# try_stmt: TRY COLON suite (except_clause+ else_clause? finaly_clause? | finaly_clause)\n" +
                "\n" +
                "# TRY COLON suite except_clause\n" +
Severity: Minor
Found in docs/compare/src/test/java/com/compare/PythonIdentAppTest.java - About 1 hr to fix

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    func (s *JavaRefactorListener) EnterExpressionList(ctx *ExpressionListContext) {
        for _, expression := range ctx.AllExpression() {
            expText := expression.GetText()
            if isUppercaseText(expText) {
                startLine := ctx.GetStart().GetLine()
    Severity: Major
    Found in pkg/application/refactor/base/java_refactor_listener.go and 1 other location - About 1 hr to fix
    pkg/application/refactor/base/java_refactor_listener.go on lines 141..151

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 146.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    func (s *JavaRefactorListener) EnterStatement(ctx *StatementContext) {
        for _, expression := range ctx.AllExpression() {
            expText := expression.GetText()
            if isUppercaseText(expText) {
                startLine := ctx.GetStart().GetLine()
    Severity: Major
    Found in pkg/application/refactor/base/java_refactor_listener.go and 1 other location - About 1 hr to fix
    pkg/application/refactor/base/java_refactor_listener.go on lines 129..139

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 146.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    func TestGetMethodName(t *testing.T) {
        tests := []struct {
            name   string
            origin string
            want   string
    Severity: Major
    Found in pkg/infrastructure/jpackage/jpackage_test.go and 1 other location - About 1 hr to fix
    pkg/infrastructure/jpackage/jpackage_test.go on lines 22..37

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 145.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    func TestGetClassName(t *testing.T) {
        tests := []struct {
            name string
            path string
            want string
    Severity: Major
    Found in pkg/infrastructure/jpackage/jpackage_test.go and 1 other location - About 1 hr to fix
    pkg/infrastructure/jpackage/jpackage_test.go on lines 5..20

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 145.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Function Test_ShouldBuildSuccessDataFromSourceData has 56 lines of code (exceeds 50 allowed). Consider refactoring.
    Open

    func Test_ShouldBuildSuccessDataFromSourceData(t *testing.T) {
        g := NewGomegaWithT(t)
    
        codePath := "../../../_fixtures/grammar/java/examples/api"
        callNodes, identifiersMap, identifiers := testhelper.BuildAnalysisDeps(codePath)
    Severity: Minor
    Found in pkg/application/call/call_graph_test.go - About 1 hr to fix

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      func Test_ShouldShowMergePackage(t *testing.T) {
          g := NewGomegaWithT(t)
      
          fullGraph, nodeFilter := createGraph()
      
      
      Severity: Major
      Found in pkg/application/arch/tequila/incl_viz_test.go and 1 other location - About 1 hr to fix
      pkg/application/arch/tequila/incl_viz_test.go on lines 70..80

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 141.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 6 locations. Consider refactoring.
      Open

      func TestBadSmellApp_LazyElement(t *testing.T) {
          g := NewGomegaWithT(t)
      
          bsApp := NewBadSmellApp()
          codePath := "../../../_fixtures/bs/LazyClass.java"
      Severity: Major
      Found in pkg/application/bs/bad_smell_app_test.go and 5 other locations - About 1 hr to fix
      pkg/application/bs/bad_smell_app_test.go on lines 9..21
      pkg/application/bs/bad_smell_app_test.go on lines 22..34
      pkg/application/bs/bad_smell_app_test.go on lines 65..77
      pkg/application/bs/bad_smell_app_test.go on lines 79..91
      pkg/application/bs/bad_smell_app_test.go on lines 93..105

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 141.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language