propelorm/Propel2

View on GitHub

Showing 68 of 764 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addRetrieveRoot(&$script)
    {
        $queryClassName = $this->queryClassName;
        $objectClassName = $this->objectClassName;
        $useScope = $this->behavior->useScope();
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php on lines 595..630

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this
            ->addOption('mysql-engine', null, InputOption::VALUE_REQUIRED, 'MySQL engine (MyISAM, InnoDB, ...)')
            ->addOption('schema-dir', null, InputOption::VALUE_REQUIRED, 'The directory where the schema files are placed')
            ->addOption('output-dir', null, InputOption::VALUE_REQUIRED, 'The output directory')
            ->addOption('validate', null, InputOption::VALUE_NONE, '')
Severity: Major
Found in src/Propel/Generator/Command/SqlBuildCommand.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Command/ModelBuildCommand.php on lines 29..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addRetrieveTree(&$script)
    {
        $queryClassName = $this->queryClassName;
        $objectClassName = $this->objectClassName;
        $useScope = $this->behavior->useScope();
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php on lines 556..588

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function getModifyTableForeignKeysDDL(TableDiff $tableDiff)
    {
        $ret = '';

        foreach ($tableDiff->getRemovedFks() as $fk) {
Severity: Major
Found in src/Propel/Generator/Platform/DefaultPlatform.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Platform/DefaultPlatform.php on lines 1011..1030

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function getModifyTableIndicesDDL(TableDiff $tableDiff)
    {
        $ret = '';

        foreach ($tableDiff->getRemovedIndices() as $index) {
Severity: Major
Found in src/Propel/Generator/Platform/DefaultPlatform.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Platform/DefaultPlatform.php on lines 1040..1059

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function getIdentifierPhp($columnValueMutator, $connectionVariableName = '$con', $sequenceName = '', $tab = '            ', $phpType = null)
    {
        if (!$sequenceName) {
            throw new EngineException('Oracle needs a sequence name to fetch primary keys');
        }
Severity: Major
Found in src/Propel/Generator/Platform/OraclePlatform.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Platform/PgsqlPlatform.php on lines 886..903

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function getIdentifierPhp($columnValueMutator, $connectionVariableName = '$con', $sequenceName = '', $tab = '            ', $phpType = null)
    {
        if (!$sequenceName) {
            throw new EngineException('PostgreSQL needs a sequence name to fetch primary keys');
        }
Severity: Major
Found in src/Propel/Generator/Platform/PgsqlPlatform.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Platform/OraclePlatform.php on lines 478..495

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 95.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ($modelWith->isSingleTableInheritance()) {
                $class = call_user_func([$modelWith->getTableMap(), 'getOMClass'], $row, $col, false);
                $refl = new ReflectionClass($class);
                if ($refl->isAbstract()) {
                    $col += constant('Map\\' . $class . 'TableMap::NUM_COLUMNS');
Severity: Major
Found in src/Propel/Runtime/Formatter/ArrayFormatter.php and 1 other location - About 1 hr to fix
src/Propel/Runtime/Formatter/OnDemandFormatter.php on lines 111..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ($modelWith->isSingleTableInheritance()) {
                $class = call_user_func([$modelWith->getTableMap(), 'getOMClass'], $row, $col, false);
                $refl = new ReflectionClass($class);
                if ($refl->isAbstract()) {
                    $col += constant('Map\\' . $class . 'TableMap::NUM_COLUMNS');
Severity: Major
Found in src/Propel/Runtime/Formatter/OnDemandFormatter.php and 1 other location - About 1 hr to fix
src/Propel/Runtime/Formatter/ArrayFormatter.php on lines 171..181

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 94.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($pos) {
                $leftTableAlias = substr($left, 0, $pos);
                $leftColumnName = substr($left, $pos + 1);
                [$leftTableName, $leftTableAlias] = $this->getTableNameAndAlias($leftTableAlias);
            } else {
Severity: Major
Found in src/Propel/Runtime/ActiveQuery/Criteria.php and 1 other location - About 1 hr to fix
src/Propel/Runtime/ActiveQuery/Criteria.php on lines 1018..1025

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($pos) {
                $rightTableAlias = substr($right, 0, $pos);
                $rightColumnName = substr($right, $pos + 1);
                [$rightTableName, $rightTableAlias] = $this->getTableNameAndAlias($rightTableAlias);
            } else {
Severity: Major
Found in src/Propel/Runtime/ActiveQuery/Criteria.php and 1 other location - About 1 hr to fix
src/Propel/Runtime/ActiveQuery/Criteria.php on lines 1008..1015

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 93.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected $irregular = [
        'leaf' => 'leaves',
        'loaf' => 'loaves',
        'move' => 'moves',
        'foot' => 'feet',
Severity: Major
Found in src/Propel/Common/Pluralizer/StandardEnglishPluralizer.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Platform/MysqlPlatform.php on lines 335..354

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $supportedOptions = [
            'AutoIncrement' => 'AUTO_INCREMENT',
            'AvgRowLength' => 'AVG_ROW_LENGTH',
            'Charset' => 'CHARACTER SET',
            'Checksum' => 'CHECKSUM',
Severity: Major
Found in src/Propel/Generator/Platform/MysqlPlatform.php and 1 other location - About 1 hr to fix
src/Propel/Common/Pluralizer/StandardEnglishPluralizer.php on lines 79..98

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 92.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function isDeleteCascadeEmulationNeeded()
    {
        $table = $this->getTable();
        if ((!$this->getPlatform()->supportsNativeDeleteTrigger() || $this->getBuildProperty('generator.objectModel.emulateForeignKeyConstraints')) && count($table->getReferrers()) > 0) {
            foreach ($table->getReferrers() as $fk) {
Severity: Major
Found in src/Propel/Generator/Builder/Om/QueryBuilder.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Builder/Om/QueryBuilder.php on lines 374..386

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function isDeleteSetNullEmulationNeeded()
    {
        $table = $this->getTable();
        if ((!$this->getPlatform()->supportsNativeDeleteTrigger() || $this->getBuildProperty('generator.objectModel.emulateForeignKeyConstraints')) && count($table->getReferrers()) > 0) {
            foreach ($table->getReferrers() as $fk) {
Severity: Major
Found in src/Propel/Generator/Builder/Om/QueryBuilder.php and 1 other location - About 1 hr to fix
src/Propel/Generator/Builder/Om/QueryBuilder.php on lines 355..367

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($this->withUpdatedAt()) {
            $valueSource = strtoupper($this->getTable()->getColumn($this->getParameter('update_column'))->getType()) === 'INTEGER'
                ? '$time'
                : '$highPrecision';
            $script .= "
src/Propel/Generator/Behavior/Timestampable/TimestampableBehavior.php on lines 127..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function addInsertAsNextSiblingOf(&$script)
    {
        $objectClassName = $this->builder->getObjectClassName();
        $queryClassName = $this->builder->getQueryClassName(true);
        $useScope = $this->behavior->useScope();
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1254..1300
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1319..1360

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($this->withCreatedAt()) {
            $valueSource = strtoupper($this->getTable()->getColumn($this->getParameter('create_column'))->getType()) === 'INTEGER'
                ? '$time'
                : '$highPrecision';
            $script .= "
src/Propel/Generator/Behavior/Timestampable/TimestampableBehavior.php on lines 137..145

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function addInsertAsPrevSiblingOf(&$script)
    {
        $objectClassName = $this->builder->getObjectClassName();
        $queryClassName = $this->builder->getQueryClassName(true);
        $useScope = $this->behavior->useScope();
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1254..1300
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1367..1408

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function addInsertAsFirstChildOf(&$script)
    {
        $objectClassName = $this->builder->getObjectClassName();
        $queryClassName = $this->builder->getQueryClassName(true);
        $useScope = $this->behavior->useScope();
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1319..1360
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorObjectBuilderModifier.php on lines 1367..1408

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 88.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language