Sign upLogin

python-security/pyt

View on GitHub
Star
pyt/helper_visitors/label_visitor.py

Summary

Maintainability
F
3 days
Test Coverage

LabelVisitor has 62 functions (exceeds 20 allowed). Consider refactoring.
Open

class LabelVisitor(ast.NodeVisitor):
    def __init__(self):
        self.result = ''

    def handle_comma_separated(self, comma_separated_list):
Severity: Major
Found in pyt/helper_visitors/label_visitor.py - About 1 day to fix

    Cyclomatic complexity is too high in method slicev. (8)
    Open

        def slicev(self, node):
        if isinstance(node, ast.Slice):
            if node.lower:
                self.visit(node.lower)
            if node.upper:
    Severity: Minor
    Found in pyt/helper_visitors/label_visitor.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function slicev has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring.
    Open

        def slicev(self, node):
        if isinstance(node, ast.Slice):
            if node.lower:
                self.visit(node.lower)
            if node.upper:
    Severity: Minor
    Found in pyt/helper_visitors/label_visitor.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

        def slicev(self, node):
        if isinstance(node, ast.Slice):
            if node.lower:
                self.visit(node.lower)
            if node.upper:
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 1 other location - About 7 hrs to fix
    pyt/helper_visitors/vars_visitor.py on lines 131..144

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 116.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            for expression in node.generators:
            self.result += ' for '
            self.visit(expression.target)
            self.result += ' in '
            self.visit(expression.iter)
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 1 other location - About 1 hr to fix
    pyt/helper_visitors/label_visitor.py on lines 131..135

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            for expression in node.generators:
            self.result += ' for '
            self.visit(expression.target)
            self.result += ' in '
            self.visit(expression.iter)
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 1 other location - About 1 hr to fix
    pyt/helper_visitors/label_visitor.py on lines 103..107

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 48.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        def visit_Tuple(self, node):
        self.result += '('

        self.handle_comma_separated(node.elts)
    Severity: Minor
    Found in pyt/helper_visitors/label_visitor.py and 1 other location - About 50 mins to fix
    pyt/helper_visitors/label_visitor.py on lines 23..28

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 36.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        def visit_List(self, node):
        self.result += '['

        self.handle_comma_separated(node.elts)
    Severity: Minor
    Found in pyt/helper_visitors/label_visitor.py and 1 other location - About 50 mins to fix
    pyt/helper_visitors/label_visitor.py on lines 16..21

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 36.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        def visit_ListComp(self, node):
        self.result += '['
        self.comprehensions(node)
        self.result += ']'
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 2 other locations - About 40 mins to fix
    pyt/helper_visitors/label_visitor.py on lines 109..112
    pyt/helper_visitors/label_visitor.py on lines 119..122

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 34.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        def visit_SetComp(self, node):
        self.result += '{'
        self.comprehensions(node)
        self.result += '}'
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 2 other locations - About 40 mins to fix
    pyt/helper_visitors/label_visitor.py on lines 109..112
    pyt/helper_visitors/label_visitor.py on lines 114..117

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 34.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

        def visit_GeneratorExp(self, node):
        self.result += '('
        self.comprehensions(node)
        self.result += ')'
    Severity: Major
    Found in pyt/helper_visitors/label_visitor.py and 2 other locations - About 40 mins to fix
    pyt/helper_visitors/label_visitor.py on lines 114..117
    pyt/helper_visitors/label_visitor.py on lines 119..122

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 34.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    There are no issues that match your filters.

    Category
    Status