Sign upLogin

saltstack/salt

View on GitHub
Star
salt/metaproxy/proxy.py

Summary

Maintainability
F
1 mo
Test Coverage

Function thread_return has a Cognitive Complexity of 102 (exceeds 5 allowed). Consider refactoring.
Open

def thread_return(cls, minion_instance, opts, data):
    '''
    This method should be used as a threading target, start the actual
    minion side execution.
    '''
Severity: Minor
Found in salt/metaproxy/proxy.py - About 2 days to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

File proxy.py has 645 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# -*- coding: utf-8 -*-
#
# Proxy minion metaproxy modules
#
from __future__ import absolute_import, print_function, with_statement, unicode_literals
Severity: Major
Found in salt/metaproxy/proxy.py - About 1 day to fix

    Cyclomatic complexity is too high in function thread_return. (57)
    Open

    def thread_return(cls, minion_instance, opts, data):
    '''
    This method should be used as a threading target, start the actual
    minion side execution.
    '''
    Severity: Minor
    Found in salt/metaproxy/proxy.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function thread_multi_return has a Cognitive Complexity of 45 (exceeds 5 allowed). Consider refactoring.
    Open

    def thread_multi_return(cls, minion_instance, opts, data):
    '''
    This method should be used as a threading target, start the actual
    minion side execution.
    '''
    Severity: Minor
    Found in salt/metaproxy/proxy.py - About 6 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function post_master_init has a Cognitive Complexity of 31 (exceeds 5 allowed). Consider refactoring.
    Open

    def post_master_init(self, master):

    log.debug("subclassed LazyLoaded _post_master_init")
    if self.connected:
        self.opts['master'] = master
    Severity: Minor
    Found in salt/metaproxy/proxy.py - About 4 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function handle_decoded_payload has a Cognitive Complexity of 24 (exceeds 5 allowed). Consider refactoring.
    Open

    def handle_decoded_payload(self, data):
    '''
    Override this method if you wish to handle the decoded data
    differently.
    '''
    Severity: Minor
    Found in salt/metaproxy/proxy.py - About 3 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Cyclomatic complexity is too high in function thread_multi_return. (29)
    Open

    def thread_multi_return(cls, minion_instance, opts, data):
    '''
    This method should be used as a threading target, start the actual
    minion side execution.
    '''
    Severity: Minor
    Found in salt/metaproxy/proxy.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function post_master_init. (26)
    Open

    def post_master_init(self, master):

    log.debug("subclassed LazyLoaded _post_master_init")
    if self.connected:
        self.opts['master'] = master
    Severity: Minor
    Found in salt/metaproxy/proxy.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function target_load has a Cognitive Complexity of 14 (exceeds 5 allowed). Consider refactoring.
    Open

    def target_load(self, load):
    # Verify that the publication is valid
    if 'tgt' not in load or 'jid' not in load or 'fun' not in load \
        or 'arg' not in load:
        return False
    Severity: Minor
    Found in salt/metaproxy/proxy.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function post_master_init has 33 lines of code (exceeds 25 allowed). Consider refactoring.
    Open

    def post_master_init(self, master):

    log.debug("subclassed LazyLoaded _post_master_init")
    if self.connected:
        self.opts['master'] = master
    Severity: Minor
    Found in salt/metaproxy/proxy.py - About 1 hr to fix

      Function target has a Cognitive Complexity of 10 (exceeds 5 allowed). Consider refactoring.
      Open

      def target(cls, minion_instance, opts, data, connected):

    if not minion_instance:
        minion_instance = cls(opts)
        minion_instance.connected = connected
      Severity: Minor
      Found in salt/metaproxy/proxy.py - About 1 hr to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Avoid deeply nested control flow statements.
      Open

                              if not iret:
                            iret = []
                        iret.append(single)
      Severity: Major
      Found in salt/metaproxy/proxy.py - About 45 mins to fix

        Avoid too many return statements within this function.
        Open

                    return False
        Severity: Major
        Found in salt/metaproxy/proxy.py - About 30 mins to fix

          Avoid too many return statements within this function.
          Open

              return True
          Severity: Major
          Found in salt/metaproxy/proxy.py - About 30 mins to fix

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                    try:
            minion_blackout_violation = False
            if minion_instance.connected and minion_instance.opts['pillar'].get('minion_blackout', False):
                whitelist = minion_instance.opts['pillar'].get('minion_blackout_whitelist', [])
                # this minion is blacked out. Only allow saltutil.refresh_pillar and the whitelist
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 3 days to fix
            salt/minion.py on lines 1673..1796

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 392.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if data['ret'] and isinstance(data['ret'], six.string_types):
        if 'ret_config' in data:
            ret['ret_config'] = data['ret_config']
        if 'ret_kwargs' in data:
            ret['ret_kwargs'] = data['ret_kwargs']
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 1839..1858

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 210.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Similar blocks of code found in 2 locations. Consider refactoring.
            Open

            def target_load(self, load):
    # Verify that the publication is valid
    if 'tgt' not in load or 'jid' not in load or 'fun' not in load \
        or 'arg' not in load:
        return False
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 2907..2934

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 206.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if minion_instance.connected and minion_instance.opts['pillar'].get('minion_blackout', False):
                whitelist = minion_instance.opts['pillar'].get('minion_blackout_whitelist', [])
                # this minion is blacked out. Only allow saltutil.refresh_pillar and the whitelist
                if data['fun'][ind] != 'saltutil.refresh_pillar' and data['fun'][ind] not in whitelist:
                    minion_blackout_violation = True
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 1906..1914

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 186.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if function_name in minion_instance.functions or allow_missing_funcs is True:
        try:
            minion_blackout_violation = False
            if minion_instance.connected and minion_instance.opts['pillar'].get('minion_blackout', False):
                whitelist = minion_instance.opts['pillar'].get('minion_blackout_whitelist', [])
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 1672..1811

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 173.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if isinstance(return_data, types.GeneratorType):
                ind = 0
                iret = {}
                for single in return_data:
                    if isinstance(single, dict) and isinstance(iret, dict):
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 1718..1734

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 160.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if data['ret']:
        if 'ret_config' in data:
            ret['ret_config'] = data['ret_config']
        if 'ret_kwargs' in data:
            ret['ret_kwargs'] = data['ret_kwargs']
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 day to fix
            salt/minion.py on lines 1964..1978

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 150.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if self.opts['mine_enabled'] and 'mine.update' in self.functions:
        self.schedule.add_job({
            '__mine_interval':
                {
                    'function': 'mine.update',
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 6 hrs to fix
            salt/minion.py on lines 1304..1318

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 100.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if multiprocessing_enabled:
        if sys.platform.startswith('win'):
            # let python reconstruct the minion on the other side if we're
            # running on windows
            instance = None
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 5 hrs to fix
            salt/minion.py on lines 1558..1571

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 96.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if process_count_max > 0:
        process_count = len(salt.utils.minion.running(self.opts))
        while process_count >= process_count_max:
            log.warning('Maximum number of processes (%s) reached while '
                        'executing jid %s, waiting %s seconds...',
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 5 hrs to fix
            salt/minion.py on lines 1541..1550

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 93.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Similar blocks of code found in 2 locations. Consider refactoring.
            Open

            def handle_payload(self, payload):
    if payload is not None and payload['enc'] == 'aes':
        if self._target_load(payload['load']):

            self._handle_decoded_payload(payload['load'])
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 5 hrs to fix
            salt/minion.py on lines 2893..2901

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 94.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if self.jid_queue is not None:
        if data['jid'] in self.jid_queue:
            return
        else:
            self.jid_queue.append(data['jid'])
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1525..1531

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 84.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if isinstance(data['fun'], six.string_types):
        if data['fun'] == 'sys.reload_modules':
            self.functions, self.returners, self.function_errors, self.executors = self._load_modules()
            self.schedule.functions = self.functions
            self.schedule.returners = self.returners
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1533..1537

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 77.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if isinstance(opts.get('return'), six.string_types):
        if data['ret']:
            data['ret'] = ','.join((data['ret'], opts['return']))
        else:
            data['ret'] = opts['return']
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1831..1835

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 77.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                    try:
            minion_blackout_violation = False
            if minion_instance.connected and minion_instance.opts['pillar'].get('minion_blackout', False):
                whitelist = minion_instance.opts['pillar'].get('minion_blackout_whitelist', [])
                # this minion is blacked out. Only allow saltutil.refresh_pillar and the whitelist
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1904..1953

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 76.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if retcode == salt.defaults.exitcodes.EX_OK:
                # No nonzero retcode in __context__ dunder. Check if return
                # is a dictionary with a "result" or "success" key.
                try:
                    func_result = all(return_data.get(x, True)
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1740..1750

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 74.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if retcode == 0:
                # No nonzero retcode in __context__ dunder. Check if return
                # is a dictionary with a "result" or "success" key.
                try:
                    func_result = all(ret['return'][key].get(x, True)
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1933..1943

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 74.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        for name in executors:
                fname = '{0}.execute'.format(name)
                if fname not in minion_instance.executors:
                    raise SaltInvocationError("Executor '{0}' is not available".format(name))
                return_data = minion_instance.executors[fname](opts, data, func, args, kwargs)
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 4 hrs to fix
            salt/minion.py on lines 1710..1715

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 74.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if minion_instance.connected and minion_instance.opts['pillar'].get('minion_blackout', False):
                whitelist = minion_instance.opts['pillar'].get('minion_blackout_whitelist', [])
                # this minion is blacked out. Only allow saltutil.refresh_pillar and the whitelist
                if function_name != 'saltutil.refresh_pillar' and function_name not in whitelist:
                    minion_blackout_violation = True
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 3 hrs to fix
            salt/minion.py on lines 1675..1679

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 72.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if self.connected and self.opts['pillar']:
        # The pillar has changed due to the connection to the master.
        # Reload the functions so that they can use the new pillar data.
        self.functions, self.returners, self.function_errors, self.executors = self._load_modules()
        if hasattr(self, 'schedule'):
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 3 hrs to fix
            salt/minion.py on lines 1286..1294

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 72.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if minion_instance.opts['grains'].get('minion_blackout', False):
                whitelist = minion_instance.opts['grains'].get('minion_blackout_whitelist', [])
                if function_name != 'saltutil.refresh_pillar' and function_name not in whitelist:
                    minion_blackout_violation = True
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 3 hrs to fix
            salt/minion.py on lines 1681..1684

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 65.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if 'user' in data:
        log.info(
            'User %s Executing command %s with jid %s',
            data['user'], data['fun'], data['jid']
        )
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 3 hrs to fix
            salt/minion.py on lines 1511..1519

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 64.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 4 locations. Consider refactoring.
            Open

                if opts['multiprocessing'] and not salt.utils.platform.is_windows():
        # Shutdown the multiprocessing before daemonizing
        salt.log.setup.shutdown_multiprocessing_logging()

        salt.utils.process.daemonize_if(opts)
            Severity: Major
            Found in salt/metaproxy/proxy.py and 3 other locations - About 3 hrs to fix
            salt/metaproxy/proxy.py on lines 341..348
            salt/minion.py on lines 1646..1653
            salt/minion.py on lines 1869..1876

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 62.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 4 locations. Consider refactoring.
            Open

                if opts['multiprocessing'] and not salt.utils.platform.is_windows():
        # Shutdown the multiprocessing before daemonizing
        salt.log.setup.shutdown_multiprocessing_logging()

        salt.utils.process.daemonize_if(opts)
            Severity: Major
            Found in salt/metaproxy/proxy.py and 3 other locations - About 3 hrs to fix
            salt/metaproxy/proxy.py on lines 564..571
            salt/minion.py on lines 1646..1653
            salt/minion.py on lines 1869..1876

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 62.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if multifunc_ordered:
        ret = {
            'return': [None] * num_funcs,
            'retcode': [None] * num_funcs,
            'success': [False] * num_funcs
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 2 hrs to fix
            salt/minion.py on lines 1888..1898

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 55.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                        if isinstance(executors, six.string_types):
                executors = [executors]
            elif not isinstance(executors, list) or not executors:
                raise SaltInvocationError("Wrong executors specification: {0}. String or non-empty list expected".
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 2 hrs to fix
            salt/minion.py on lines 1701..1704

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 54.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                if 'metadata' in data:
        if isinstance(data['metadata'], dict):
            ret['metadata'] = data['metadata']
        else:
            log.warning('The metadata parameter must be a dictionary. Ignoring.')
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 2 hrs to fix
            salt/minion.py on lines 1818..1822

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 52.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                    if self.opts['master_failback'] and \
            'master_list' in self.opts and \
            self.opts['master'] != self.opts['master_list'][0]:
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 2 hrs to fix
            salt/minion.py on lines 1336..1338

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 51.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Similar blocks of code found in 2 locations. Consider refactoring.
            Open

                    self.opts['pillar'] = yield salt.pillar.get_async_pillar(
            self.opts,
            self.opts['grains'],
            self.opts['id'],
            saltenv=self.opts['saltenv'],
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 hr to fix
            salt/minion.py on lines 3547..3552

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 56.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 2 locations. Consider refactoring.
            Open

                allow_missing_funcs = any([
        minion_instance.executors['{0}.allow_missing_func'.format(executor)](function_name)
        for executor in executors
        if '{0}.allow_missing_func' in minion_instance.executors
            Severity: Major
            Found in salt/metaproxy/proxy.py and 1 other location - About 1 hr to fix
            salt/minion.py on lines 1667..1670

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 45.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            Identical blocks of code found in 3 locations. Consider refactoring.
            Open

                        self.schedule.add_job({
                salt.minion.master_event(type='failback'):
                    {
                        'function': 'status.ping_master',
                        'seconds': self.opts['master_failback_interval'],
            Severity: Major
            Found in salt/metaproxy/proxy.py and 2 other locations - About 1 hr to fix
            salt/minion.py on lines 1339..1347
            salt/minion.py on lines 2575..2581

            Duplicated Code

            Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

            Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

            When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

            Tuning

            This issue has a mass of 41.

            We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

            The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

            If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

            See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

            Refactorings

            Further Reading

            There are no issues that match your filters.

            Category
            Status