saltstack/salt

View on GitHub
salt/modules/bigip.py

Summary

Maintainability
F
1 mo
Test Coverage

File bigip.py has 1714 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# -*- coding: utf-8 -*-
'''
An execution module which can manipulate an f5 bigip via iControl REST
    :maturity:      develop
    :platform:      f5_bigip_11.6
Severity: Major
Found in salt/modules/bigip.py - About 4 days to fix

    Function create_virtual has a Cognitive Complexity of 40 (exceeds 5 allowed). Consider refactoring.
    Open

    def create_virtual(hostname, username, password, name, destination,
                       pool=None,
                       address_status=None,
                       auto_lasthop=None,
                       bwc_policy=None,
    Severity: Minor
    Found in salt/modules/bigip.py - About 6 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function modify_virtual has a Cognitive Complexity of 37 (exceeds 5 allowed). Consider refactoring.
    Open

    def modify_virtual(hostname, username, password, name,
                       destination=None,
                       pool=None,
                       address_status=None,
                       auto_lasthop=None,
    Severity: Minor
    Found in salt/modules/bigip.py - About 5 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Cyclomatic complexity is too high in function create_virtual. (30)
    Open

    def create_virtual(hostname, username, password, name, destination,
                       pool=None,
                       address_status=None,
                       auto_lasthop=None,
                       bwc_policy=None,
    Severity: Minor
    Found in salt/modules/bigip.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Cyclomatic complexity is too high in function modify_virtual. (28)
    Open

    def modify_virtual(hostname, username, password, name,
                       destination=None,
                       pool=None,
                       address_status=None,
                       auto_lasthop=None,
    Severity: Minor
    Found in salt/modules/bigip.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function _set_value has a Cognitive Complexity of 21 (exceeds 5 allowed). Consider refactoring.
    Open

    def _set_value(value):
        '''
        A function to detect if user is trying to pass a dictionary or list.  parse it and return a
        dictionary list or a string
        '''
    Severity: Minor
    Found in salt/modules/bigip.py - About 2 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function _determine_toggles has a Cognitive Complexity of 19 (exceeds 5 allowed). Consider refactoring.
    Open

    def _determine_toggles(payload, toggles):
        '''
        BigIP can't make up its mind if it likes yes / no or true or false.
        Figure out what it likes to hear without confusing the user.
        '''
    Severity: Minor
    Found in salt/modules/bigip.py - About 2 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function replace_pool_members has a Cognitive Complexity of 18 (exceeds 5 allowed). Consider refactoring.
    Open

    def replace_pool_members(hostname, username, password, name, members):
        '''
        A function to connect to a bigip device and replace members of an existing pool with new members.
    
        hostname
    Severity: Minor
    Found in salt/modules/bigip.py - About 2 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function _build_list has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring.
    Open

    def _build_list(option_value, item_kind):
        '''
        pass in an option to check for a list of items, create a list of dictionary of items to set
        for this option
        '''
    Severity: Minor
    Found in salt/modules/bigip.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function create_profile has a Cognitive Complexity of 11 (exceeds 5 allowed). Consider refactoring.
    Open

    def create_profile(hostname, username, password, profile_type, name, **kwargs):
        r'''
        A function to connect to a bigip device and create a profile.
    
        hostname
    Severity: Minor
    Found in salt/modules/bigip.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function modify_profile has a Cognitive Complexity of 11 (exceeds 5 allowed). Consider refactoring.
    Open

    def modify_profile(hostname, username, password, profile_type, name, **kwargs):
        r'''
        A function to connect to a bigip device and create a profile.
    
        A function to connect to a bigip device and create a profile.
    Severity: Minor
    Found in salt/modules/bigip.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function add_pool_member has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
    Open

    def add_pool_member(hostname, username, password, name, member):
        '''
        A function to connect to a bigip device and add a new member to an existing pool.
    
        hostname
    Severity: Minor
    Found in salt/modules/bigip.py - About 35 mins to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function modify_monitor has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
    Open

    def modify_monitor(hostname, username, password, monitor_type, name, **kwargs):
        '''
        A function to connect to a bigip device and modify an existing monitor.
    
        hostname
    Severity: Minor
    Found in salt/modules/bigip.py - About 35 mins to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function create_monitor has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
    Open

    def create_monitor(hostname, username, password, monitor_type, name, **kwargs):
        '''
        A function to connect to a bigip device and create a monitor.
    
        hostname
    Severity: Minor
    Found in salt/modules/bigip.py - About 35 mins to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Avoid too many return statements within this function.
    Open

        return _load_response(response)
    Severity: Major
    Found in salt/modules/bigip.py - About 30 mins to fix

      Avoid too many return statements within this function.
      Open

              return value_items
      Severity: Major
      Found in salt/modules/bigip.py - About 30 mins to fix

        Avoid too many return statements within this function.
        Open

                return value
        Severity: Major
        Found in salt/modules/bigip.py - About 30 mins to fix

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

                  if isinstance(source_address_translation, dict):
                      payload['source-address-translation'] = source_address_translation
                  elif source_address_translation == 'none':
                      payload['source-address-translation'] = {'pool': 'none', 'type': 'none'}
                  elif source_address_translation == 'automap':
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 1 day to fix
          salt/modules/bigip.py on lines 1737..1746

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 128.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              if source_address_translation is not None:
                  if source_address_translation == 'none':
                      payload['source-address-translation'] = {'pool': 'none', 'type': 'none'}
                  elif source_address_translation == 'automap':
                      payload['source-address-translation'] = {'pool': 'none', 'type': 'automap'}
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 1 day to fix
          salt/modules/bigip.py on lines 1462..1472

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 128.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def list_monitor(hostname, username, password, monitor_type, name=None, ):
              '''
              A function to connect to a bigip device and list an existing monitor.  If no name is provided than all
              monitors of the specified type will be listed.
          
          
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 7 hrs to fix
          salt/modules/bigip.py on lines 2004..2038

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 127.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def list_profile(hostname, username, password, profile_type, name=None, ):
              '''
              A function to connect to a bigip device and list an existing profile.  If no name is provided than all
              profiles of the specified type will be listed.
          
          
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 7 hrs to fix
          salt/modules/bigip.py on lines 1831..1865

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 127.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

                  elif isinstance(vlans, six.string_types) and (vlans.startswith('enabled') or vlans.startswith('disabled')):
                      try:
                          vlans_setting = vlans.split(':')[0]
                          payload['vlans'] = vlans.split(':')[1].split(',')
                          if vlans_setting == 'disabled':
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 1768..1777

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 107.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

                  elif vlans.startswith('enabled') or vlans.startswith('disabled'):
                      try:
                          vlans_setting = vlans.split(':')[0]
                          payload['vlans'] = vlans.split(':')[1].split(',')
                          if vlans_setting == 'disabled':
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 1494..1503

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 107.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def list_virtual(hostname, username, password, name=None):
              '''
              A function to connect to a bigip device and list all virtuals or a specific virtual.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 588..619

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 115.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def list_pool(hostname, username, password, name=None):
              '''
              A function to connect to a bigip device and list all pools or a specific pool.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 1203..1234

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 115.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def delete_transaction(hostname, username, password, label):
              '''
              A function to connect to a bigip device and delete an existing transaction.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 271..306

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 114.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def list_transaction(hostname, username, password, label):
              '''
              A function to connect to a bigip device and list an existing transaction.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 6 hrs to fix
          salt/modules/bigip.py on lines 354..388

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 114.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

          def delete_pool_member(hostname, username, password, name, member):
              '''
              A function to connect to a bigip device and delete a specific pool.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 5 hrs to fix
          salt/modules/bigip.py on lines 1968..2001
          salt/modules/bigip.py on lines 2210..2243

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 105.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

          def delete_monitor(hostname, username, password, monitor_type, name):
              '''
              A function to connect to a bigip device and delete an existing monitor.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 5 hrs to fix
          salt/modules/bigip.py on lines 1168..1200
          salt/modules/bigip.py on lines 2210..2243

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 105.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

          def delete_profile(hostname, username, password, profile_type, name):
              '''
              A function to connect to a bigip device and delete an existing profile.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 5 hrs to fix
          salt/modules/bigip.py on lines 1168..1200
          salt/modules/bigip.py on lines 1968..2001

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 105.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              for key, value in six.iteritems(kwargs):
                  if not key.startswith('__'):
                      if key not in ['hostname', 'username', 'password', 'profile_type']:
                          key = key.replace('_', '-')
          
          
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 5 hrs to fix
          salt/modules/bigip.py on lines 2100..2108

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 96.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              for key, value in six.iteritems(kwargs):
                  if not key.startswith('__'):
                      if key not in ['hostname', 'username', 'password', 'profile_type']:
                          key = key.replace('_', '-')
          
          
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 5 hrs to fix
          salt/modules/bigip.py on lines 2188..2196

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 96.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def delete_virtual(hostname, username, password, name):
              '''
              A function to connect to a bigip device and delete a specific virtual.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 5 hrs to fix
          salt/modules/bigip.py on lines 923..953

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 101.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

          def delete_pool(hostname, username, password, name):
              '''
              A function to connect to a bigip device and delete a specific pool.
          
              hostname
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 5 hrs to fix
          salt/modules/bigip.py on lines 1798..1828

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 101.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

                  if isinstance(vlans, dict):
                      try:
                          payload['vlans'] = vlans['vlan_ids']
                          if vlans['enabled']:
                              payload['vlans-enabled'] = True
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 4 hrs to fix
          salt/modules/bigip.py on lines 1755..1763

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 78.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

                  if isinstance(vlans, dict):
                      try:
                          payload['vlans'] = vlans['vlan_ids']
                          if vlans['enabled']:
                              payload['vlans-enabled'] = True
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 4 hrs to fix
          salt/modules/bigip.py on lines 1481..1489

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 78.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

          def create_virtual(hostname, username, password, name, destination,
                             pool=None,
                             address_status=None,
                             auto_lasthop=None,
                             bwc_policy=None,
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 4 hrs to fix
          salt/states/bigip.py on lines 1593..1631
          salt/states/bigip.py on lines 1851..1889
          salt/states/bigip.py on lines 2172..2210

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 84.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              toggles = {
                  'address-status': {'type': 'yes_no', 'value': address_status},
                  'cmp-enabled': {'type': 'yes_no', 'value': cmp_enabled},
                  'dhcp-relay': {'type': 'true_false', 'value': dhcp_relay},
                  'reject': {'type': 'true_false', 'value': reject},
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 3 hrs to fix
          salt/modules/bigip.py on lines 1696..1703

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 63.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              toggles = {
                  'address-status': {'type': 'yes_no', 'value': address_status},
                  'cmp-enabled': {'type': 'yes_no', 'value': cmp_enabled},
                  'dhcp-relay': {'type': 'true_false', 'value': dhcp_relay},
                  'reject': {'type': 'true_false', 'value': reject},
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 3 hrs to fix
          salt/modules/bigip.py on lines 1416..1423

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 63.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/profile/{type}/{name}'.format(type=profile_type, name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 3 hrs to fix
          salt/modules/bigip.py on lines 1157..1163
          salt/modules/bigip.py on lines 1957..1963

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 71.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/pool/{name}/members/{member}'.format(name=name, member=member),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 3 hrs to fix
          salt/modules/bigip.py on lines 1957..1963
          salt/modules/bigip.py on lines 2199..2205

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 71.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 3 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/monitor/{type}/{name}'.format(type=monitor_type, name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 3 hrs to fix
          salt/modules/bigip.py on lines 1157..1163
          salt/modules/bigip.py on lines 2199..2205

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 71.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/node/{name}'.format(name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 1907..1913
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/monitor/{type}'.format(type=monitor_type),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/virtual/{name}'.format(name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1907..1913
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/pool/{name}'.format(name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 1907..1913
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.put(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/pool/{name}'.format(name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 1907..1913
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/profile/{type}'.format(type=profile_type),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1068..1074
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 1907..1913

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 7 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/pool/{name}/members'.format(name=name),
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 6 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 541..547
          salt/modules/bigip.py on lines 912..918
          salt/modules/bigip.py on lines 1012..1018
          salt/modules/bigip.py on lines 1787..1793
          salt/modules/bigip.py on lines 1907..1913
          salt/modules/bigip.py on lines 2111..2117

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 68.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

          def create_pool(hostname, username, password, name, members=None,
                          allow_nat=None,
                          allow_snat=None,
                          description=None,
                          gateway_failsafe_device=None,
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 2 hrs to fix
          salt/states/bigip.py on lines 554..576

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 53.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              if state is not None:
                  if state == 'enabled':
                      payload['enabled'] = True
                  elif state == 'disabled':
                      payload['disabled'] = True
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 2 hrs to fix
          salt/modules/bigip.py on lines 1780..1784

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 53.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 2 locations. Consider refactoring.
          Open

              if state is not None:
                  if state == 'enabled':
                      payload['enabled'] = True
                  elif state == 'disabled':
                      payload['disabled'] = True
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 2 hrs to fix
          salt/modules/bigip.py on lines 1508..1512

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 53.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/virtual',
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 248..254
          salt/modules/bigip.py on lines 462..467
          salt/modules/bigip.py on lines 765..771

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 60.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/transaction',
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 462..467
          salt/modules/bigip.py on lines 765..771
          salt/modules/bigip.py on lines 1515..1521

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 60.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/pool',
                      data=salt.utils.json.dumps(payload)
                  )
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 248..254
          salt/modules/bigip.py on lines 462..467
          salt/modules/bigip.py on lines 1515..1521

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 60.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

              try:
                  response = bigip_session.post(
                      BIG_IP_URL_BASE.format(host=hostname) + '/ltm/node',
                      data=salt.utils.json.dumps(payload))
              except requests.exceptions.ConnectionError as e:
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 2 hrs to fix
          salt/modules/bigip.py on lines 248..254
          salt/modules/bigip.py on lines 765..771
          salt/modules/bigip.py on lines 1515..1521

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 60.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Identical blocks of code found in 3 locations. Consider refactoring.
          Open

          def modify_pool(hostname, username, password, name,
                          allow_nat=None,
                          allow_snat=None,
                          description=None,
                          gateway_failsafe_device=None,
          Severity: Major
          Found in salt/modules/bigip.py and 2 other locations - About 2 hrs to fix
          salt/states/bigip.py on lines 734..756
          salt/states/bigip.py on lines 954..976

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 51.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

                      if (definition['value'] is True or definition['value'] == 'yes') and definition['type'] == 'yes_no':
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 1 hr to fix
          salt/modules/bigip.py on lines 150..150
          salt/modules/bigip.py on lines 154..154
          salt/modules/bigip.py on lines 156..156

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

                      elif (definition['value'] is False or definition['value'] == 'no') and definition['type'] == 'yes_no':
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 1 hr to fix
          salt/modules/bigip.py on lines 148..148
          salt/modules/bigip.py on lines 154..154
          salt/modules/bigip.py on lines 156..156

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

                      if (definition['value'] is True or definition['value'] == 'yes') and definition['type'] == 'true_false':
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 1 hr to fix
          salt/modules/bigip.py on lines 148..148
          salt/modules/bigip.py on lines 150..150
          salt/modules/bigip.py on lines 156..156

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 4 locations. Consider refactoring.
          Open

                      elif (definition['value'] is False or definition['value'] == 'no') and definition['type'] == 'true_false':
          Severity: Major
          Found in salt/modules/bigip.py and 3 other locations - About 1 hr to fix
          salt/modules/bigip.py on lines 148..148
          salt/modules/bigip.py on lines 150..150
          salt/modules/bigip.py on lines 154..154

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

              params = {
                  'description': description,
                  'gateway-failsafe-device': gateway_failsafe_device,
                  'ignore-persisted-weight': ignore_persisted_weight,
                  'ip-tos-to-client': ip_tos_to_client,
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 1 hr to fix
          salt/modules/bigip.py on lines 720..740

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          Similar blocks of code found in 2 locations. Consider refactoring.
          Open

              params = {
                  'description': description,
                  'gateway-failsafe-device': gateway_failsafe_device,
                  'ignore-persisted-weight': ignore_persisted_weight,
                  'ip-tos-to-client': ip_tos_to_client,
          Severity: Major
          Found in salt/modules/bigip.py and 1 other location - About 1 hr to fix
          salt/modules/bigip.py on lines 871..891

          Duplicated Code

          Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

          Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

          When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

          Tuning

          This issue has a mass of 47.

          We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

          The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

          If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

          See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

          Refactorings

          Further Reading

          There are no issues that match your filters.

          Category
          Status