webcomics/dosage

View on GitHub

Showing 47 of 223 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        # Fix inconsistent filenames
        filename = imageUrl.rsplit('/', 1)[-1]
        filename = filename.replace('Page', 'UberQuest')
        filename = filename.replace('UberQuest01.', 'UberQuest001.')
Severity: Major
Found in dosagelib/plugins/studiokhimera.py and 1 other location - About 1 hr to fix
dosagelib/plugins/r.py on lines 89..96

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        # Fix inconsistent filenames
        filename = imageUrl.rsplit('/', 1)[-1]
        filename = filename.replace('0bf62e92-2c98-4fb2-8ed7-4584980beb17', 'page0005')
        filename = filename.replace('76112837-c5cd-4df7-8c53-3ed5c25194cf', 'page0003')
Severity: Major
Found in dosagelib/plugins/r.py and 1 other location - About 1 hr to fix
dosagelib/plugins/studiokhimera.py on lines 58..65

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def __init__(self, name, path, first, sid, eol=False):
        super().__init__('TheCyantianChronicles/' + name, sid)
        self.url = self.baseUrl + 'series/' + path + '/'
        self.firstStripUrl = self.stripUrl % first
        self.endOfLife = eol
Severity: Major
Found in dosagelib/plugins/shivaestudios.py and 1 other location - About 1 hr to fix
dosagelib/plugins/shivaestudios.py on lines 92..96

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def __init__(self, name, path, first, sid, eol=False):
        super().__init__('Shivae/' + name, sid)
        self.url = self.baseUrl + 'series/' + path + '/'
        self.firstStripUrl = self.stripUrl % first
        self.endOfLife = eol
Severity: Major
Found in dosagelib/plugins/shivaestudios.py and 1 other location - About 1 hr to fix
dosagelib/plugins/shivaestudios.py on lines 57..61

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class CasuallyKayla(_BasicScraper):
    url = 'http://casuallykayla.com/'
    stripUrl = url + '?p=%s'
    firstStripUrl = stripUrl % '89'
    imageSearch = compile(tagre("img", "src",
Severity: Major
Found in dosagelib/plugins/c.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/g.py on lines 153..160
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class GUComics(_BasicScraper):
    url = 'http://www.gucomics.com/'
    stripUrl = url + '%s'
    firstStripUrl = stripUrl % '20000710'
    imageSearch = compile(tagre("img", "src", r'(/comics/\d{4}/gu_[^"]+)'))
Severity: Major
Found in dosagelib/plugins/g.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class BadassMuthas(_BasicScraper):
    url = 'http://badassmuthas.com/pages/comic.php'
    stripUrl = url + '?%s'
    firstStripUrl = stripUrl % '1'
    imageSearch = compile(tagre("img", "src", r'(/images/comicsissue[^"]+)'))
Severity: Major
Found in dosagelib/plugins/b.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/g.py on lines 153..160
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class ZombieHunters(_BasicScraper):
    url = 'http://www.thezombiehunters.com/'
    stripUrl = url + '?strip_id=%s'
    firstStripUrl = stripUrl % '1'
    imageSearch = compile(tagre("img", "src", r'(/istrip_files/strips/[^"]+)'))
Severity: Major
Found in dosagelib/plugins/z.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/g.py on lines 153..160

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class ElfOnlyInn(_BasicScraper):
    url = 'http://www.elfonlyinn.net/'
    stripUrl = url + 'd/%s.html'
    firstStripUrl = stripUrl % '20020523'
    imageSearch = compile(tagre("img", "src", r'(/comics/[^"]+)'))
Severity: Major
Found in dosagelib/plugins/e.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/g.py on lines 153..160
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class CaseyAndAndy(_BasicScraper):
    url = 'http://www.galactanet.com/comic/'
    stripUrl = url + 'view.php?strip=%s'
    firstStripUrl = stripUrl % '1'
    imageSearch = compile(tagre("img", "src", r'(Strip\d+\.gif)'))
Severity: Major
Found in dosagelib/plugins/c.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/d.py on lines 15..22
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/g.py on lines 153..160
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

class Damonk(_BasicScraper):
    url = 'http://www.damonk.com/'
    stripUrl = url + 'd/%s.html'
    firstStripUrl = stripUrl % '20060522'
    imageSearch = compile(tagre("img", "src", r'(/comics/[^"]+)'))
Severity: Major
Found in dosagelib/plugins/d.py and 6 other locations - About 1 hr to fix
dosagelib/plugins/b.py on lines 20..27
dosagelib/plugins/c.py on lines 79..86
dosagelib/plugins/c.py on lines 89..97
dosagelib/plugins/e.py on lines 75..82
dosagelib/plugins/g.py on lines 153..160
dosagelib/plugins/z.py on lines 39..45

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def starter(self):
        # Build list of chapters for naming
        indexPage = self.getPage(self.url)
        self.chapters = indexPage.xpath('//a[./img[contains(@class, "attachment-large")]]/@href')
        latestPage = self.chapters[0]
Severity: Major
Found in dosagelib/plugins/s.py and 1 other location - About 1 hr to fix
dosagelib/plugins/n.py on lines 123..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def starter(self):
        # Build list of chapters for naming
        indexPage = self.getPage(self.url)
        self.chapters = indexPage.xpath('//a[./img[contains(@class, "attachment-large")]]/@href')
        latestPage = self.chapters[0]
Severity: Major
Found in dosagelib/plugins/n.py and 1 other location - About 1 hr to fix
dosagelib/plugins/s.py on lines 529..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 76.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        page = self.getPage(pageUrl)
        title = page.xpath('//div[@class="browsePath"]/h2/text()')[0]
        return title.replace('"', '') + '.' + imageUrl.rsplit('.', 1)[-1]
Severity: Major
Found in dosagelib/plugins/wrongside.py and 1 other location - About 1 hr to fix
dosagelib/plugins/wrongside.py on lines 30..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        page = self.getPage(pageUrl)
        title = page.xpath('//div[@class="browsePath"]/h2/text()')[0]
        return title.replace('"', '') + '.' + imageUrl.rsplit('.', 1)[-1]
Severity: Major
Found in dosagelib/plugins/wrongside.py and 1 other location - About 1 hr to fix
dosagelib/plugins/wrongside.py on lines 72..75

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 75.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        postDate = pageUrl.rsplit('/', 3)
        filename = imageUrl.rsplit('/', 1)[-1]
        return '%s-%s-%s_%s' % (postDate[1], postDate[2], postDate[3], filename)
Severity: Major
Found in dosagelib/plugins/c.py and 1 other location - About 1 hr to fix
dosagelib/plugins/e.py on lines 153..157

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    def namer(self, imageUrl, pageUrl):
        # Fix inconsistent filenames
        postDate = pageUrl.rsplit('/', 3)
        filename = imageUrl.rsplit('/', 1)[-1]
        return '%s-%s-%s_%s' % (postDate[1], postDate[2], postDate[3], filename)
Severity: Major
Found in dosagelib/plugins/e.py and 1 other location - About 1 hr to fix
dosagelib/plugins/c.py on lines 444..447

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

class Everblue(_ComicControlScraper):
    url = 'http://www.everblue-comic.com/comic/'
    stripUrl = url + '%s'
    firstStripUrl = stripUrl % '1'

Severity: Major
Found in dosagelib/plugins/e.py and 1 other location - About 1 hr to fix
dosagelib/plugins/l.py on lines 140..146

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

class LilithsWord(_ComicControlScraper):
    url = 'http://www.lilithword.com/'
    stripUrl = url + 'comic/%s'
    firstStripUrl = stripUrl % 'prologue-page-00'

Severity: Major
Found in dosagelib/plugins/l.py and 1 other location - About 1 hr to fix
dosagelib/plugins/e.py on lines 173..179

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 72.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

class SandraOnTheRocks(_BasicScraper):
    url = 'http://www.sandraontherocks.com/'
    stripUrl = url + 'strips-sotr/%s'
    firstStripUrl = stripUrl % 'start_by_running'
    imageSearch = compile(tagre("img", "src", r'([^"]*/comics/[^"]+)'))
Severity: Major
Found in dosagelib/plugins/s.py and 4 other locations - About 1 hr to fix
dosagelib/plugins/l.py on lines 149..155
dosagelib/plugins/m.py on lines 39..46
dosagelib/plugins/o.py on lines 157..164
dosagelib/plugins/s.py on lines 562..569

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 70.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language