if ! [ -z $DB_HOSTNAME ] ; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ `which curl` ]; then

Close

Quote this to prevent word splitting

Problematic code:

ls -l $(getfilename)

Correct code:

# getfilename outputs 1 file
ls -l "$(getfilename)"

# getfilename outputs multiple files, linefeed separated
getfilename | while IFS='' read -r line
do
  ls -l "$line"
done

Rationale:

When command expansions are unquoted, word splitting and globbing will occur. This often manifests itself by breaking when filenames contain spaces.

Trying to fix it by adding quotes or escapes to the data will not work. Instead, quote the command substitution itself.

If the command substitution outputs multiple pieces of data, use a loop instead.

Exceptions

In rare cases you actually want word splitting, such as in

gcc $(pkg-config --libs openssl) client.c

This is because pkg-config outputs -lssl -lcrypto, which you want to break up by spaces into -lssl and -lcrypto. An alternative is to put the variables to an array and expand it:

args=( $(pkg-config --libs openssl) )
gcc "${args[@]}" client.c

The power of using an array becomes evident when you want to combine, for example, the command result with user-provided arguments:

compile () {
    args=( $(pkg-config --libs openssl) "${@}" )
    gcc "${args[@]}" client.c
}
compile -DDEBUG
+ gcc -lssl -lcrypto -DDEBUG client.c

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    mkdir -p $WP_CORE_DIR

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        download https://develop.svn.wordpress.org/${WP_TESTS_TAG}/wp-tests-config-sample.php "$WP_TESTS_DIR"/wp-tests-config.php

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        svn co --quiet https://develop.svn.wordpress.org/${WP_TESTS_TAG}/tests/phpunit/data/ $WP_TESTS_DIR/data

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        WP_CORE_DIR=$(echo $WP_CORE_DIR | sed "s:/\+$::")

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        elif ! [ -z $DB_SOCK_OR_PORT ] ; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        download https://wordpress.org/${ARCHIVE_NAME}.tar.gz  /tmp/wordpress.tar.gz

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        elif ! [ -z $DB_HOSTNAME ] ; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        tar --strip-components=1 -zxmf /tmp/wordpress.tar.gz -C $WP_CORE_DIR

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        svn co --quiet https://develop.svn.wordpress.org/${WP_TESTS_TAG}/tests/phpunit/includes/ $WP_TESTS_DIR/includes

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        if [ $(echo $DB_SOCK_OR_PORT | grep -e '^[0-9]\{1,\}$') ]; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    mysqladmin create $DB_NAME --user="$DB_USER" --password="$DB_PASS"$EXTRA

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        mv /tmp/wordpress-nightly/wordpress/* $WP_CORE_DIR

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    download https://raw.github.com/markoheijnen/wp-mysqli/master/db.php $WP_CORE_DIR/wp-content/db.php

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        svn co --quiet https://develop.svn.wordpress.org/${WP_TESTS_TAG}/tests/phpunit/data/ $WP_TESTS_DIR/data

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ ${SKIP_DB_CREATE} = "true" ]; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        if [ $(echo $DB_SOCK_OR_PORT | grep -e '^[0-9]\{1,\}$') ]; then

Close

Quote this to prevent word splitting

Problematic code:

ls -l $(getfilename)

Correct code:

# getfilename outputs 1 file
ls -l "$(getfilename)"

# getfilename outputs multiple files, linefeed separated
getfilename | while IFS='' read -r line
do
  ls -l "$line"
done

Rationale:

When command expansions are unquoted, word splitting and globbing will occur. This often manifests itself by breaking when filenames contain spaces.

Trying to fix it by adding quotes or escapes to the data will not work. Instead, quote the command substitution itself.

If the command substitution outputs multiple pieces of data, use a loop instead.

Exceptions

In rare cases you actually want word splitting, such as in

gcc $(pkg-config --libs openssl) client.c

This is because pkg-config outputs -lssl -lcrypto, which you want to break up by spaces into -lssl and -lcrypto. An alternative is to put the variables to an array and expand it:

args=( $(pkg-config --libs openssl) )
gcc "${args[@]}" client.c

The power of using an array becomes evident when you want to combine, for example, the command result with user-provided arguments:

compile () {
    args=( $(pkg-config --libs openssl) "${@}" )
    gcc "${args[@]}" client.c
}
compile -DDEBUG
+ gcc -lssl -lcrypto -DDEBUG client.c

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    elif [ `which wget` ]; then

Close

Quote this to prevent word splitting

Problematic code:

ls -l $(getfilename)

Correct code:

# getfilename outputs 1 file
ls -l "$(getfilename)"

# getfilename outputs multiple files, linefeed separated
getfilename | while IFS='' read -r line
do
  ls -l "$line"
done

Rationale:

When command expansions are unquoted, word splitting and globbing will occur. This often manifests itself by breaking when filenames contain spaces.

Trying to fix it by adding quotes or escapes to the data will not work. Instead, quote the command substitution itself.

If the command substitution outputs multiple pieces of data, use a loop instead.

Exceptions

In rare cases you actually want word splitting, such as in

gcc $(pkg-config --libs openssl) client.c

This is because pkg-config outputs -lssl -lcrypto, which you want to break up by spaces into -lssl and -lcrypto. An alternative is to put the variables to an array and expand it:

args=( $(pkg-config --libs openssl) )
gcc "${args[@]}" client.c

The power of using an array becomes evident when you want to combine, for example, the command result with user-provided arguments:

compile () {
    args=( $(pkg-config --libs openssl) "${@}" )
    gcc "${args[@]}" client.c
}
compile -DDEBUG
+ gcc -lssl -lcrypto -DDEBUG client.c

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        if [ $WP_VERSION == 'latest' ]; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        mkdir -p $WP_TESTS_DIR

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        svn co --quiet https://develop.svn.wordpress.org/${WP_TESTS_TAG}/tests/phpunit/includes/ $WP_TESTS_DIR/includes

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ -d $WP_CORE_DIR ]; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ ! -d $WP_TESTS_DIR ]; then

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    mysqladmin create $DB_NAME --user="$DB_USER" --password="$DB_PASS"$EXTRA

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        if [ $(echo $DB_SOCK_OR_PORT | grep -e '^[0-9]\{1,\}$') ]; then

Close

Use grep -q instead of comparing output with [ -n .. ].

Problematic code:

if [ "$(find . | grep 'IMG[0-9]')" ]
then
  echo "Images found"
fi

Correct code:

if find . | grep -q 'IMG[0-9]'
then
  echo "Images found"
fi

Rationale:

The problematic code has to iterate the entire directory and read all matching lines into memory before making a decision.

The correct code is cleaner and stops at the first matching line, avoiding both iterating the rest of the directory and reading data into memory.

Exceptions

The pipefail bash option may interfere with this rewrite, since the if will now in effect be evaluating the statuses of all commands instead of just the last one. Be careful using them together.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ `which curl` ]; then

Close

Use $(STATEMENT) instead of legacy `STATEMENT`

Problematic code

echo "Current time: `date`"

Correct code

echo "Current time: $(date)"

Rationale

Backtick command substitution `STATEMENT` is legacy syntax with several issues.

1. It has a series of undefined behaviors related to quoting in POSIX.
2. It imposes a custom escaping mode with surprising results.
3. It's exceptionally hard to nest.

$(STATEMENT) command substitution has none of these problems, and is therefore strongly encouraged.

Exceptions

None.

See also

• http://mywiki.wooledge.org/BashFAQ/082

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        WP_CORE_DIR=$(echo $WP_CORE_DIR | sed "s:/\+$::")

Close

SC2001: See if you can use ${variable//search/replace} instead.

Problematic code:

string="stirng" ; echo "$string" | sed -e "s/ir/ri/"

Correct code:

string="stirng" ; echo "${string//ir/ri}"

Rationale:

Let's assume somewhere earlier in your code you have put data into a variable (Ex: $string). Now you want to do a search and replace inside the contents of $string and echo the contents out. You could pass this to sed as done in the example above, but for simple substitutions utilizing the shell for the same feature is a lot simpler and should be utilized whenever possible.

Exceptions

Occasionally a more complex sed substitution is required. For example, getting the last character of a string.

string="stirng" ; echo "$string" | sed -e "s/^.*\(.\)$/\1/"

This is a bit simple for the example and there are alternative ways of doing this in the shell, but this SC2001 flags on several of my crazy complex sed commands which are beyond the scope of this example. Utilizing some of the more complex capabilities of sed is required occasionally and it is safe to ignore SC2001.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    elif [ `which wget` ]; then

Close

Use $(STATEMENT) instead of legacy `STATEMENT`

Problematic code

echo "Current time: `date`"

Correct code

echo "Current time: $(date)"

Rationale

Backtick command substitution `STATEMENT` is legacy syntax with several issues.

1. It has a series of undefined behaviors related to quoting in POSIX.
2. It imposes a custom escaping mode with surprising results.
3. It's exceptionally hard to nest.

$(STATEMENT) command substitution has none of these problems, and is therefore strongly encouraged.

Exceptions

None.

See also

• http://mywiki.wooledge.org/BashFAQ/082

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.