ytti/oxidized

---
init_prompt:
commands:
  /system resource print: |-
    \x20                  uptime: 58m18s
    \x20                 version: 7.10.1 (stable)
    \x20              build-time: Jun/27/2023 09:03:02
    \x20        factory-software: 7.1
    \x20             free-memory: 244.1MiB
    \x20            total-memory: 320.0MiB
    \x20                     cpu: QEMU
    \x20               cpu-count: 1
    \x20           cpu-frequency: 2611MHz
    \x20                cpu-load: 2%
    \x20          free-hdd-space: 71.0MiB
    \x20         total-hdd-space: 89.2MiB
    \x20 write-sect-since-reboot: 1544
    \x20        write-sect-total: 1544
    \x20       architecture-name: x86_64
    \x20              board-name: CHR
    \x20                platform: MikroTik
    
  /system package update print: |-
    \x20           channel: stable
    \x20 installed-version: 7.10.1
    
  /system history print without-paging: |-
    
  /export show-sensitive: |-
    # 2024-10-25 06:08:35 by RouterOS 7.10.1
    # software id =\x20
    #
    /interface ethernet
    set [ find default-name=ether1 ] disable-running-check=no
    set [ find default-name=ether2 ] disable-running-check=no
    set [ find default-name=ether3 ] disable-running-check=no
    set [ find default-name=ether4 ] disable-running-check=no
    set [ find default-name=ether5 ] disable-running-check=no
    set [ find default-name=ether6 ] disable-running-check=no
    set [ find default-name=ether7 ] disable-running-check=no
    set [ find default-name=ether8 ] disable-running-check=no
    /disk
    set slot1 slot=slot1 type=hardware
    set slot2 slot=slot2 type=hardware
    set slot3 slot=slot3 type=hardware
    set slot4 slot=slot4 type=hardware
    set slot5 slot=slot5 type=hardware
    set slot6 slot=slot6 type=hardware
    set slot7 slot=slot7 type=hardware
    set slot8 slot=slot8 type=hardware
    set slot9 slot=slot9 type=hardware
    set slot10 slot=slot10 type=hardware
    set slot11 slot=slot11 type=hardware
    set slot12 slot=slot12 type=hardware
    set slot13 slot=slot13 type=hardware
    set slot14 slot=slot14 type=hardware
    set slot15 slot=slot15 type=hardware
    set slot16 slot=slot16 type=hardware
    set slot17 slot=slot17 type=hardware
    set slot18 slot=slot18 type=hardware
    set slot19 slot=slot19 type=hardware
    set slot20 slot=slot20 type=hardware
    set slot21 slot=slot21 type=hardware
    set slot22 slot=slot22 type=hardware
    set slot23 slot=slot23 type=hardware
    set slot24 slot=slot24 type=hardware
    set slot25 slot=slot25 type=hardware
    set slot26 slot=slot26 type=hardware
    set slot27 slot=slot27 type=hardware
    set slot28 slot=slot28 type=hardware
    /interface wireless security-profiles
    set [ find default=yes ] supplicant-identity=MikroTik
    /port
    set 0 name=serial0
    /ip address
    add address=192.168.129.7/24 interface=ether1 network=192.168.129.0
    /ip dhcp-client
    add interface=ether1
    /ip ssh
    set always-allow-password-login=yes
    /system note
    set show-at-login=no
  quit: |-
    interrupted
oxidized_output: |
  #                   version: 7.10.1 (stable)
  #          factory-software: 7.1
  #              total-memory: 320.0MiB
  #                       cpu: QEMU
  #                 cpu-count: 1
  #           total-hdd-space: 89.2MiB
  #         architecture-name: x86_64
  #                board-name: CHR
  #                  platform: MikroTik#   installed-version: 7.10.1# software id =\x20
  #
  /interface ethernet
  set [ find default-name=ether1 ] disable-running-check=no
  set [ find default-name=ether2 ] disable-running-check=no
  set [ find default-name=ether3 ] disable-running-check=no
  set [ find default-name=ether4 ] disable-running-check=no
  set [ find default-name=ether5 ] disable-running-check=no
  set [ find default-name=ether6 ] disable-running-check=no
  set [ find default-name=ether7 ] disable-running-check=no
  set [ find default-name=ether8 ] disable-running-check=no
  /disk
  set slot1 slot=slot1 type=hardware
  set slot2 slot=slot2 type=hardware
  set slot3 slot=slot3 type=hardware
  set slot4 slot=slot4 type=hardware
  set slot5 slot=slot5 type=hardware
  set slot6 slot=slot6 type=hardware
  set slot7 slot=slot7 type=hardware
  set slot8 slot=slot8 type=hardware
  set slot9 slot=slot9 type=hardware
  set slot10 slot=slot10 type=hardware
  set slot11 slot=slot11 type=hardware
  set slot12 slot=slot12 type=hardware
  set slot13 slot=slot13 type=hardware
  set slot14 slot=slot14 type=hardware
  set slot15 slot=slot15 type=hardware
  set slot16 slot=slot16 type=hardware
  set slot17 slot=slot17 type=hardware
  set slot18 slot=slot18 type=hardware
  set slot19 slot=slot19 type=hardware
  set slot20 slot=slot20 type=hardware
  set slot21 slot=slot21 type=hardware
  set slot22 slot=slot22 type=hardware
  set slot23 slot=slot23 type=hardware
  set slot24 slot=slot24 type=hardware
  set slot25 slot=slot25 type=hardware
  set slot26 slot=slot26 type=hardware
  set slot27 slot=slot27 type=hardware
  set slot28 slot=slot28 type=hardware
  /interface wireless security-profiles
  set [ find default=yes ] supplicant-identity=MikroTik
  /port
  set 0 name=serial0
  /ip address
  add address=192.168.129.7/24 interface=ether1 network=192.168.129.0
  /ip dhcp-client
  add interface=ether1
  /ip ssh
  set always-allow-password-login=yes
  /system note
  set show-at-login=no