Sign upLogin

AuthorizeNet/sdk-dotnet

View on GitHub
Star

Showing 471 of 545 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 2 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 2974..2992
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3051..3069

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 2 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 2953..2971
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3051..3069

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 2 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 2953..2971
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 2974..2992

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4979..4997

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 179.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 5870..5888

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 179.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 3 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3712..3733
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 2960..2981
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 3028..3049

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 3 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3644..3665
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3712..3733
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 3028..3049

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 3 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3644..3665
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3712..3733
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 2960..2981

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 3 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 3644..3665
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 2960..2981
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 3028..3049

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 175.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        [System.Xml.Serialization.XmlElementAttribute("bankAccount", typeof(bankAccountType))]
        [System.Xml.Serialization.XmlElementAttribute("creditCard", typeof(creditCardType))]
        [System.Xml.Serialization.XmlElementAttribute("emv", typeof(paymentEmvType))]
        [System.Xml.Serialization.XmlElementAttribute("encryptedTrackData", typeof(encryptedTrackDataType))]
        [System.Xml.Serialization.XmlElementAttribute("opaqueData", typeof(opaqueDataType))]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 2314..2321

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        [System.Xml.Serialization.XmlElementAttribute("bankAccount", typeof(bankAccountType))]
        [System.Xml.Serialization.XmlElementAttribute("creditCard", typeof(creditCardType))]
        [System.Xml.Serialization.XmlElementAttribute("emv", typeof(paymentEmvType))]
        [System.Xml.Serialization.XmlElementAttribute("encryptedTrackData", typeof(encryptedTrackDataType))]
        [System.Xml.Serialization.XmlElementAttribute("opaqueData", typeof(opaqueDataType))]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 2800..2807

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4872..4889

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 5763..5780

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4722..4736

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 5613..5627

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4788..4802

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 5679..5693

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4121..4135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Utility/AnetApiSchema.generated.cs and 1 other location - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 5012..5026

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 164.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    [System.CodeDom.Compiler.GeneratedCodeAttribute("xsd", "4.6.1055.0")]
    [System.SerializableAttribute()]
    [System.Diagnostics.DebuggerStepThroughAttribute()]
    [System.ComponentModel.DesignerCategoryAttribute("code")]
    [System.Xml.Serialization.XmlTypeAttribute(AnonymousType=true, Namespace="AnetApi/xml/v1/schema/AnetApiSchema.xsd")]
Severity: Major
Found in Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs and 3 other locations - About 2 hrs to fix
Authorize.NET/Api/Contracts/V1/AnetApiSchema.generated.cs on lines 4900..4920
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4009..4029
Authorize.NET/Utility/AnetApiSchema.generated.cs on lines 4280..4300

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language