Showing 1,938 of 7,504 total issues
Identical blocks of code found in 2 locations. Consider refactoring. Open
function paged_walk( $elements, $max_depth, $page_num, $per_page ) {
/* sanity check */
if ( empty($elements) || $max_depth < -1 )
return '';
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 771.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function get_contributors()
{
$contributors = array();
foreach ((array) $this->get_source_tags(SIMPLEPIE_NAMESPACE_ATOM_10, 'contributor') as $contributor)
{
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 756.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public function get_contributors()
{
$contributors = array();
foreach ((array) $this->get_item_tags(SIMPLEPIE_NAMESPACE_ATOM_10, 'contributor') as $contributor)
{
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 756.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Object.extend(Array.prototype, {
_each: function(iterator) {
for (var i = 0, length = this.length; i < length; i++)
iterator(this[i]);
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 666.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Object.extend(Array.prototype, {
_each: function(iterator) {
for (var i = 0, length = this.length; i < length; i++)
iterator(this[i]);
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 666.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Ajax.Response = Class.create({
initialize: function(request){
this.request = request;
var transport = this.transport = request.transport,
readyState = this.readyState = transport.readyState;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 651.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Ajax.Response = Class.create({
initialize: function(request){
this.request = request;
var transport = this.transport = request.transport,
readyState = this.readyState = transport.readyState;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 651.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Object.extend(Object, {
inspect: function(object) {
try {
if (object === undefined) return 'undefined';
if (object === null) return 'null';
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 619.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Object.extend(Object, {
inspect: function(object) {
try {
if (object === undefined) return 'undefined';
if (object === null) return 'null';
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 619.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Event.Methods = (function() {
var isButton;
if (Prototype.Browser.IE) {
var buttonMap = { 0: 1, 1: 4, 2: 2 };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 607.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Event.Methods = (function() {
var isButton;
if (Prototype.Browser.IE) {
var buttonMap = { 0: 1, 1: 4, 2: 2 };
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 607.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public static function windows_1252_to_utf8($string)
{
static $convert_table = array("\x80" => "\xE2\x82\xAC", "\x81" => "\xEF\xBF\xBD", "\x82" => "\xE2\x80\x9A", "\x83" => "\xC6\x92", "\x84" => "\xE2\x80\x9E", "\x85" => "\xE2\x80\xA6", "\x86" => "\xE2\x80\xA0", "\x87" => "\xE2\x80\xA1", "\x88" => "\xCB\x86", "\x89" => "\xE2\x80\xB0", "\x8A" => "\xC5\xA0", "\x8B" => "\xE2\x80\xB9", "\x8C" => "\xC5\x92", "\x8D" => "\xEF\xBF\xBD", "\x8E" => "\xC5\xBD", "\x8F" => "\xEF\xBF\xBD", "\x90" => "\xEF\xBF\xBD", "\x91" => "\xE2\x80\x98", "\x92" => "\xE2\x80\x99", "\x93" => "\xE2\x80\x9C", "\x94" => "\xE2\x80\x9D", "\x95" => "\xE2\x80\xA2", "\x96" => "\xE2\x80\x93", "\x97" => "\xE2\x80\x94", "\x98" => "\xCB\x9C", "\x99" => "\xE2\x84\xA2", "\x9A" => "\xC5\xA1", "\x9B" => "\xE2\x80\xBA", "\x9C" => "\xC5\x93", "\x9D" => "\xEF\xBF\xBD", "\x9E" => "\xC5\xBE", "\x9F" => "\xC5\xB8", "\xA0" => "\xC2\xA0", "\xA1" => "\xC2\xA1", "\xA2" => "\xC2\xA2", "\xA3" => "\xC2\xA3", "\xA4" => "\xC2\xA4", "\xA5" => "\xC2\xA5", "\xA6" => "\xC2\xA6", "\xA7" => "\xC2\xA7", "\xA8" => "\xC2\xA8", "\xA9" => "\xC2\xA9", "\xAA" => "\xC2\xAA", "\xAB" => "\xC2\xAB", "\xAC" => "\xC2\xAC", "\xAD" => "\xC2\xAD", "\xAE" => "\xC2\xAE", "\xAF" => "\xC2\xAF", "\xB0" => "\xC2\xB0", "\xB1" => "\xC2\xB1", "\xB2" => "\xC2\xB2", "\xB3" => "\xC2\xB3", "\xB4" => "\xC2\xB4", "\xB5" => "\xC2\xB5", "\xB6" => "\xC2\xB6", "\xB7" => "\xC2\xB7", "\xB8" => "\xC2\xB8", "\xB9" => "\xC2\xB9", "\xBA" => "\xC2\xBA", "\xBB" => "\xC2\xBB", "\xBC" => "\xC2\xBC", "\xBD" => "\xC2\xBD", "\xBE" => "\xC2\xBE", "\xBF" => "\xC2\xBF", "\xC0" => "\xC3\x80", "\xC1" => "\xC3\x81", "\xC2" => "\xC3\x82", "\xC3" => "\xC3\x83", "\xC4" => "\xC3\x84", "\xC5" => "\xC3\x85", "\xC6" => "\xC3\x86", "\xC7" => "\xC3\x87", "\xC8" => "\xC3\x88", "\xC9" => "\xC3\x89", "\xCA" => "\xC3\x8A", "\xCB" => "\xC3\x8B", "\xCC" => "\xC3\x8C", "\xCD" => "\xC3\x8D", "\xCE" => "\xC3\x8E", "\xCF" => "\xC3\x8F", "\xD0" => "\xC3\x90", "\xD1" => "\xC3\x91", "\xD2" => "\xC3\x92", "\xD3" => "\xC3\x93", "\xD4" => "\xC3\x94", "\xD5" => "\xC3\x95", "\xD6" => "\xC3\x96", "\xD7" => "\xC3\x97", "\xD8" => "\xC3\x98", "\xD9" => "\xC3\x99", "\xDA" => "\xC3\x9A", "\xDB" => "\xC3\x9B", "\xDC" => "\xC3\x9C", "\xDD" => "\xC3\x9D", "\xDE" => "\xC3\x9E", "\xDF" => "\xC3\x9F", "\xE0" => "\xC3\xA0", "\xE1" => "\xC3\xA1", "\xE2" => "\xC3\xA2", "\xE3" => "\xC3\xA3", "\xE4" => "\xC3\xA4", "\xE5" => "\xC3\xA5", "\xE6" => "\xC3\xA6", "\xE7" => "\xC3\xA7", "\xE8" => "\xC3\xA8", "\xE9" => "\xC3\xA9", "\xEA" => "\xC3\xAA", "\xEB" => "\xC3\xAB", "\xEC" => "\xC3\xAC", "\xED" => "\xC3\xAD", "\xEE" => "\xC3\xAE", "\xEF" => "\xC3\xAF", "\xF0" => "\xC3\xB0", "\xF1" => "\xC3\xB1", "\xF2" => "\xC3\xB2", "\xF3" => "\xC3\xB3", "\xF4" => "\xC3\xB4", "\xF5" => "\xC3\xB5", "\xF6" => "\xC3\xB6", "\xF7" => "\xC3\xB7", "\xF8" => "\xC3\xB8", "\xF9" => "\xC3\xB9", "\xFA" => "\xC3\xBA", "\xFB" => "\xC3\xBB", "\xFC" => "\xC3\xBC", "\xFD" => "\xC3\xBD", "\xFE" => "\xC3\xBE", "\xFF" => "\xC3\xBF");
return strtr($string, $convert_table);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 669.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
function windows_1252_to_utf8($string)
{
static $convert_table = array("\x80" => "\xE2\x82\xAC", "\x81" => "\xEF\xBF\xBD", "\x82" => "\xE2\x80\x9A", "\x83" => "\xC6\x92", "\x84" => "\xE2\x80\x9E", "\x85" => "\xE2\x80\xA6", "\x86" => "\xE2\x80\xA0", "\x87" => "\xE2\x80\xA1", "\x88" => "\xCB\x86", "\x89" => "\xE2\x80\xB0", "\x8A" => "\xC5\xA0", "\x8B" => "\xE2\x80\xB9", "\x8C" => "\xC5\x92", "\x8D" => "\xEF\xBF\xBD", "\x8E" => "\xC5\xBD", "\x8F" => "\xEF\xBF\xBD", "\x90" => "\xEF\xBF\xBD", "\x91" => "\xE2\x80\x98", "\x92" => "\xE2\x80\x99", "\x93" => "\xE2\x80\x9C", "\x94" => "\xE2\x80\x9D", "\x95" => "\xE2\x80\xA2", "\x96" => "\xE2\x80\x93", "\x97" => "\xE2\x80\x94", "\x98" => "\xCB\x9C", "\x99" => "\xE2\x84\xA2", "\x9A" => "\xC5\xA1", "\x9B" => "\xE2\x80\xBA", "\x9C" => "\xC5\x93", "\x9D" => "\xEF\xBF\xBD", "\x9E" => "\xC5\xBE", "\x9F" => "\xC5\xB8", "\xA0" => "\xC2\xA0", "\xA1" => "\xC2\xA1", "\xA2" => "\xC2\xA2", "\xA3" => "\xC2\xA3", "\xA4" => "\xC2\xA4", "\xA5" => "\xC2\xA5", "\xA6" => "\xC2\xA6", "\xA7" => "\xC2\xA7", "\xA8" => "\xC2\xA8", "\xA9" => "\xC2\xA9", "\xAA" => "\xC2\xAA", "\xAB" => "\xC2\xAB", "\xAC" => "\xC2\xAC", "\xAD" => "\xC2\xAD", "\xAE" => "\xC2\xAE", "\xAF" => "\xC2\xAF", "\xB0" => "\xC2\xB0", "\xB1" => "\xC2\xB1", "\xB2" => "\xC2\xB2", "\xB3" => "\xC2\xB3", "\xB4" => "\xC2\xB4", "\xB5" => "\xC2\xB5", "\xB6" => "\xC2\xB6", "\xB7" => "\xC2\xB7", "\xB8" => "\xC2\xB8", "\xB9" => "\xC2\xB9", "\xBA" => "\xC2\xBA", "\xBB" => "\xC2\xBB", "\xBC" => "\xC2\xBC", "\xBD" => "\xC2\xBD", "\xBE" => "\xC2\xBE", "\xBF" => "\xC2\xBF", "\xC0" => "\xC3\x80", "\xC1" => "\xC3\x81", "\xC2" => "\xC3\x82", "\xC3" => "\xC3\x83", "\xC4" => "\xC3\x84", "\xC5" => "\xC3\x85", "\xC6" => "\xC3\x86", "\xC7" => "\xC3\x87", "\xC8" => "\xC3\x88", "\xC9" => "\xC3\x89", "\xCA" => "\xC3\x8A", "\xCB" => "\xC3\x8B", "\xCC" => "\xC3\x8C", "\xCD" => "\xC3\x8D", "\xCE" => "\xC3\x8E", "\xCF" => "\xC3\x8F", "\xD0" => "\xC3\x90", "\xD1" => "\xC3\x91", "\xD2" => "\xC3\x92", "\xD3" => "\xC3\x93", "\xD4" => "\xC3\x94", "\xD5" => "\xC3\x95", "\xD6" => "\xC3\x96", "\xD7" => "\xC3\x97", "\xD8" => "\xC3\x98", "\xD9" => "\xC3\x99", "\xDA" => "\xC3\x9A", "\xDB" => "\xC3\x9B", "\xDC" => "\xC3\x9C", "\xDD" => "\xC3\x9D", "\xDE" => "\xC3\x9E", "\xDF" => "\xC3\x9F", "\xE0" => "\xC3\xA0", "\xE1" => "\xC3\xA1", "\xE2" => "\xC3\xA2", "\xE3" => "\xC3\xA3", "\xE4" => "\xC3\xA4", "\xE5" => "\xC3\xA5", "\xE6" => "\xC3\xA6", "\xE7" => "\xC3\xA7", "\xE8" => "\xC3\xA8", "\xE9" => "\xC3\xA9", "\xEA" => "\xC3\xAA", "\xEB" => "\xC3\xAB", "\xEC" => "\xC3\xAC", "\xED" => "\xC3\xAD", "\xEE" => "\xC3\xAE", "\xEF" => "\xC3\xAF", "\xF0" => "\xC3\xB0", "\xF1" => "\xC3\xB1", "\xF2" => "\xC3\xB2", "\xF3" => "\xC3\xB3", "\xF4" => "\xC3\xB4", "\xF5" => "\xC3\xB5", "\xF6" => "\xC3\xB6", "\xF7" => "\xC3\xB7", "\xF8" => "\xC3\xB8", "\xF9" => "\xC3\xB9", "\xFA" => "\xC3\xBA", "\xFB" => "\xC3\xBB", "\xFC" => "\xC3\xBC", "\xFD" => "\xC3\xBD", "\xFE" => "\xC3\xBE", "\xFF" => "\xC3\xBF");
return strtr($string, $convert_table);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 669.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
abstract class SimplePie_Cache_DB implements SimplePie_Cache_Base
{
/**
* Helper for database conversion
*
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 660.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
class SimplePie_Cache_DB
{
function prepare_simplepie_object_for_cache($data)
{
$items = $data->get_items();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 660.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Form.Element.Serializers = {
input: function(element, value) {
switch (element.type.toLowerCase()) {
case 'checkbox':
case 'radio':
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 578.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Form.Element.Serializers = {
input: function(element, value) {
switch (element.type.toLowerCase()) {
case 'checkbox':
case 'radio':
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 578.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
var $month = array(
// English
'jan' => 1,
'january' => 1,
'feb' => 2,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 637.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
var $month = array(
// English
'jan' => 1,
'january' => 1,
'feb' => 2,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 637.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
Object.extend(Function.prototype, {
argumentNames: function() {
var names = this.toString().match(/^[\s\(]*function[^(]*\((.*?)\)/)[1].split(",").invoke("strip");
return names.length == 1 && !names[0] ? [] : names;
},
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 547.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76