Sign upLogin

ClusterLabs/hawk

View on GitHub
Star

Showing 238 of 2,363 total issues

Similar blocks of code found in 6 locations. Consider refactoring.
Open

  rescue ArgumentError => e
    respond_to do |format|
      format.json do
        render json: { errors: [e.message] }, status: :not_found
      end
Severity: Minor
Found in hawk/app/controllers/cib_controller.rb and 5 other locations - About 20 mins to fix
hawk/app/controllers/cib_controller.rb on lines 25..39
hawk/app/controllers/cib_controller.rb on lines 32..39
hawk/app/controllers/configs_controller.rb on lines 39..60
hawk/app/controllers/configs_controller.rb on lines 46..60
hawk/app/controllers/configs_controller.rb on lines 53..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 27.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with blank score' do
      record = Order.new
      record.score = ""
      record.valid? #run validation
      record.errors[:score].should include("Score is required")
Severity: Minor
Found in hawk/spec/models/order_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 5..10
hawk/spec/models/colocation_spec.rb on lines 12..17
hawk/spec/models/colocation_spec.rb on lines 56..61
hawk/spec/models/order_spec.rb on lines 12..17
hawk/spec/models/order_spec.rb on lines 53..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  def normalize_params!(current)
    if params[:order][:resources].nil?
      params[:order][:resources] = []
    else
      params[:order][:resources] = params[:order][:resources].values
Severity: Minor
Found in hawk/app/controllers/orders_controller.rb and 2 other locations - About 15 mins to fix
hawk/app/controllers/colocations_controller.rb on lines 158..162
hawk/app/controllers/tickets_controller.rb on lines 209..213

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      m[param.id] = {
        type: param.attrlist_type,
        default: param.example,
        longdesc: param.longdesc.blank? ? param.shortdesc : param.longdesc,
        name: param.name,
Severity: Minor
Found in hawk/app/models/step.rb and 1 other location - About 15 mins to fix
hawk/app/models/step.rb on lines 102..108

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with blank score' do
      record = Colocation.new
      record.score = ""
      record.valid? #run validation
      record.errors[:score].should include("Score is required")
Severity: Minor
Found in hawk/spec/models/colocation_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 12..17
hawk/spec/models/colocation_spec.rb on lines 56..61
hawk/spec/models/order_spec.rb on lines 5..10
hawk/spec/models/order_spec.rb on lines 12..17
hawk/spec/models/order_spec.rb on lines 53..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if res[:attributes].key?("maintenance")
      # A resource on maintenance is also flagged as unmanaged
      res[:maintenance] = Util.unstring(res[:attributes]["maintenance"], false)
      res[:is_managed] = false if res[:maintenance]
Severity: Minor
Found in hawk/app/models/cib.rb and 1 other location - About 15 mins to fix
hawk/app/models/cib.rb on lines 750..753

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def new
    # redirect depending on type of resource
    constraint = Constraint.find params[:id]
    new_url = "new_cib_#{constraint.object_type}_url".to_sym
    redirect_to send(new_url, cib_id: @cib.id, id: params[:id])
Severity: Minor
Found in hawk/app/controllers/constraints_controller.rb and 1 other location - About 15 mins to fix
hawk/app/controllers/constraints_controller.rb on lines 47..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with invalid score' do
      record = Order.new
      record.score = "lol"
      record.valid?
      record.errors[:score].should include("Invalid score value")
Severity: Minor
Found in hawk/spec/models/order_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 5..10
hawk/spec/models/colocation_spec.rb on lines 12..17
hawk/spec/models/colocation_spec.rb on lines 56..61
hawk/spec/models/order_spec.rb on lines 5..10
hawk/spec/models/order_spec.rb on lines 53..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with ID' do
      record = Order.new
      record.id = "foo"
      record.valid?
      record.errors[:id].should_not include("ID is required")
Severity: Minor
Found in hawk/spec/models/order_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 5..10
hawk/spec/models/colocation_spec.rb on lines 12..17
hawk/spec/models/colocation_spec.rb on lines 56..61
hawk/spec/models/order_spec.rb on lines 5..10
hawk/spec/models/order_spec.rb on lines 12..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  def normalize_params!(current)
    if params[:ticket][:resources].nil?
      params[:ticket][:resources] = []
    else
      params[:ticket][:resources] = params[:ticket][:resources].values
Severity: Minor
Found in hawk/app/controllers/tickets_controller.rb and 2 other locations - About 15 mins to fix
hawk/app/controllers/colocations_controller.rb on lines 158..162
hawk/app/controllers/orders_controller.rb on lines 160..164

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  def normalize_params!(current)
    if params[:colocation][:resources].nil?
      params[:colocation][:resources] = []
    else
      params[:colocation][:resources] = params[:colocation][:resources].values
Severity: Minor
Found in hawk/app/controllers/colocations_controller.rb and 2 other locations - About 15 mins to fix
hawk/app/controllers/orders_controller.rb on lines 160..164
hawk/app/controllers/tickets_controller.rb on lines 209..213

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with invalid score' do
      record = Colocation.new
      record.score = "lol"
      record.valid?
      record.errors[:score].should include("Invalid score value")
Severity: Minor
Found in hawk/spec/models/colocation_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 5..10
hawk/spec/models/colocation_spec.rb on lines 56..61
hawk/spec/models/order_spec.rb on lines 5..10
hawk/spec/models/order_spec.rb on lines 12..17
hawk/spec/models/order_spec.rb on lines 53..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      m[param.id] = {
        type: param.attrlist_type,
        default: param.example,
        longdesc: param.longdesc.blank? ? param.shortdesc : param.longdesc,
        name: param.name,
Severity: Minor
Found in hawk/app/models/step.rb and 1 other location - About 15 mins to fix
hawk/app/models/step.rb on lines 88..94

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def edit
    # redirect depending on type of resource
    constraint = Constraint.find params[:id]
    edit_url = "edit_cib_#{constraint.object_type}_url".to_sym
    redirect_to send(edit_url, cib_id: @cib.id, id: params[:id])
Severity: Minor
Found in hawk/app/controllers/constraints_controller.rb and 1 other location - About 15 mins to fix
hawk/app/controllers/constraints_controller.rb on lines 40..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if bundle[:attributes].key?("maintenance")
        # A resource on maintenance is also flagged as unmanaged
        bundle[:maintenance] = Util.unstring(bundle[:attributes]["maintenance"], false)
        bundle[:is_managed] = false if bundle[:maintenance]
Severity: Minor
Found in hawk/app/models/cib.rb and 1 other location - About 15 mins to fix
hawk/app/models/cib.rb on lines 239..242

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

    it 'with ID' do
      record = Colocation.new
      record.id = "foo"
      record.valid?
      record.errors[:id].should_not include("ID is required")
Severity: Minor
Found in hawk/spec/models/colocation_spec.rb and 5 other locations - About 15 mins to fix
hawk/spec/models/colocation_spec.rb on lines 5..10
hawk/spec/models/colocation_spec.rb on lines 12..17
hawk/spec/models/order_spec.rb on lines 5..10
hawk/spec/models/order_spec.rb on lines 12..17
hawk/spec/models/order_spec.rb on lines 53..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 26.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def template_clazz_options(selected)
    options = [].tap do |result|
      ::Template.options.each do |clazz, providers|
        next if clazz.empty?
Severity: Minor
Found in hawk/app/helpers/template_helper.rb and 1 other location - About 15 mins to fix
hawk/app/helpers/primitive_helper.rb on lines 24..38

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 25.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def primitive_clazz_options(selected)
    options = [].tap do |result|
      ::Primitive.options.each do |clazz, providers|
        next if clazz.empty?
Severity: Minor
Found in hawk/app/helpers/primitive_helper.rb and 1 other location - About 15 mins to fix
hawk/app/helpers/template_helper.rb on lines 5..19

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 25.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language