ForestAdmin/forest-rails

View on GitHub

Showing 27 of 140 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def bank_accounts
      params[:object] = 'bank_account'
      getter = StripeSourcesGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform
Severity: Minor
Found in app/controllers/forest_liana/stripe_controller.rb and 1 other location - About 50 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 39..50

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if creator.errors
          render serializer: nil, json: ForestAdmin::JSONAPI::Serializer.serialize_errors(
            creator.errors), status: 400
        elsif creator.record.valid?
          render serializer: nil, json: render_record_jsonapi(creator.record)
Severity: Minor
Found in app/controllers/forest_liana/resources_controller.rb and 1 other location - About 50 mins to fix
app/controllers/forest_liana/resources_controller.rb on lines 139..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if updater.errors
          render serializer: nil, json: ForestAdmin::JSONAPI::Serializer.serialize_errors(
            updater.errors), status: 400
        elsif updater.record.valid?
          render serializer: nil, json: render_record_jsonapi(updater.record)
Severity: Minor
Found in app/controllers/forest_liana/resources_controller.rb and 1 other location - About 50 mins to fix
app/controllers/forest_liana/resources_controller.rb on lines 115..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    def cards
      params[:object] = 'card'
      getter = StripeSourcesGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform
Severity: Minor
Found in app/controllers/forest_liana/stripe_controller.rb and 1 other location - About 50 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 112..123

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 42.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def payments
      getter = StripePaymentsGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 2 other locations - About 40 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 64..74
app/controllers/forest_liana/stripe_controller.rb on lines 88..98

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def invoices
      getter = StripeInvoicesGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 2 other locations - About 40 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 4..14
app/controllers/forest_liana/stripe_controller.rb on lines 88..98

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    def subscriptions
      getter = StripeSubscriptionsGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 2 other locations - About 40 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 4..14
app/controllers/forest_liana/stripe_controller.rb on lines 64..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 38.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    def subscription
      getter = StripeSubscriptionGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 4 other locations - About 35 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 16..26
app/controllers/forest_liana/stripe_controller.rb on lines 52..62
app/controllers/forest_liana/stripe_controller.rb on lines 76..86
app/controllers/forest_liana/stripe_controller.rb on lines 125..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    def invoice
      getter = StripeInvoiceGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 4 other locations - About 35 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 16..26
app/controllers/forest_liana/stripe_controller.rb on lines 52..62
app/controllers/forest_liana/stripe_controller.rb on lines 100..110
app/controllers/forest_liana/stripe_controller.rb on lines 125..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    def payment
      getter = StripePaymentGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 4 other locations - About 35 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 52..62
app/controllers/forest_liana/stripe_controller.rb on lines 76..86
app/controllers/forest_liana/stripe_controller.rb on lines 100..110
app/controllers/forest_liana/stripe_controller.rb on lines 125..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    def card
      getter = StripeSourceGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 4 other locations - About 35 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 16..26
app/controllers/forest_liana/stripe_controller.rb on lines 76..86
app/controllers/forest_liana/stripe_controller.rb on lines 100..110
app/controllers/forest_liana/stripe_controller.rb on lines 125..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    def bank_account
      getter = StripeSourceGetter.new(params, request.headers['Stripe-Secret-Key'],
        request.headers['Stripe-Reference'])
      getter.perform

Severity: Major
Found in app/controllers/forest_liana/stripe_controller.rb and 4 other locations - About 35 mins to fix
app/controllers/forest_liana/stripe_controller.rb on lines 16..26
app/controllers/forest_liana/stripe_controller.rb on lines 52..62
app/controllers/forest_liana/stripe_controller.rb on lines 76..86
app/controllers/forest_liana/stripe_controller.rb on lines 100..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 35.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      rescue ForestLiana::Errors::ExpectedError => error
        error.display_error
        error_data = ForestAdmin::JSONAPI::Serializer.serialize_errors([{
          status: error.error_code,
          detail: error.message
Severity: Minor
Found in app/controllers/forest_liana/resources_controller.rb and 1 other location - About 25 mins to fix
app/controllers/forest_liana/resources_controller.rb on lines 42..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

      rescue ForestLiana::Errors::ExpectedError => error
        error.display_error
        error_data = ForestAdmin::JSONAPI::Serializer.serialize_errors([{
          status: error.error_code,
          detail: error.message
Severity: Minor
Found in app/controllers/forest_liana/resources_controller.rb and 1 other location - About 25 mins to fix
app/controllers/forest_liana/resources_controller.rb on lines 75..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 31.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def mixpanel_integration?
          mapping = ForestLiana.integrations
            .try(:[], :mixpanel)
            .try(:[], :mapping)

Severity: Minor
Found in app/serializers/forest_liana/serializer_factory.rb and 1 other location - About 25 mins to fix
app/serializers/forest_liana/serializer_factory.rb on lines 147..158

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        def stripe_integration?
          mapping = ForestLiana.integrations
            .try(:[], :stripe)
            .try(:[], :mapping)

Severity: Minor
Found in app/serializers/forest_liana/serializer_factory.rb and 1 other location - About 25 mins to fix
app/serializers/forest_liana/serializer_factory.rb on lines 162..173

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        value.each do |segment|
          segment_id = define_child_id(collection_serialized[:id], segment['name'])
          collection_serialized[:relationships][:segments][:data] << format_child_pointer('segments', segment_id)
          @included << format_child_content('segments', segment_id, segment)
Severity: Minor
Found in app/serializers/forest_liana/schema_serializer.rb and 1 other location - About 25 mins to fix
app/serializers/forest_liana/schema_serializer.rb on lines 43..46

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        value.each do |action|
          action_id = define_child_id(collection_serialized[:id], action['name'])
          collection_serialized[:relationships][:actions][:data] << format_child_pointer('actions', action_id)
          @included << format_child_content('actions', action_id, action)
Severity: Minor
Found in app/serializers/forest_liana/schema_serializer.rb and 1 other location - About 25 mins to fix
app/serializers/forest_liana/schema_serializer.rb on lines 49..52

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 30.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

              if object['attributes']['fields']
                object['attributes']['fields'] = sort_array_of_fields(object['attributes']['fields'])
                object['attributes']['fields'].map! { |field| reorder_action_fields(field)  }
Severity: Minor
Found in app/services/forest_liana/apimap_sorter.rb and 1 other location - About 20 mins to fix
app/services/forest_liana/apimap_sorter.rb on lines 70..72

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          if collection['attributes']['fields']
            collection['attributes']['fields'] = sort_array_of_fields(collection['attributes']['fields'])
            collection['attributes']['fields'].map! { |field| reorder_collection_fields(field) }
Severity: Minor
Found in app/services/forest_liana/apimap_sorter.rb and 1 other location - About 20 mins to fix
app/services/forest_liana/apimap_sorter.rb on lines 84..86

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 28.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language