Sign upLogin

HuasoFoundries/jpgraph

View on GitHub
Star

Showing 188 of 6,805 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ($adj > 1) {
                $m = ($adj - 1.0) * (255 - min(255, min($r, min($g, $b))));

                return [min(255, $r + $m), min(255, $g + $m), min(255, $b + $m), $alpha];
            }
Severity: Major
Found in src/image/RGB.php and 1 other location - About 1 hr to fix
src/util/RGB.php on lines 531..535

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($start > $i * M_PI / 2 && $y < $yStart) {
                        $diffColor2 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error2);
                        $x2         = $_x2;
                        if (!$aaStartX) {
                            imagesetpixel($img, $cx + $xp * ($x2 + 1) + $xa, $cy + $yp * ($y) + $ya, $diffColor2);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2412..2427

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($stop < ($i + 1) * (M_PI / 2) && $y <= $yStop) {
                        $diffColor1 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error1);
                        $x1         = $_x1;
                        if (!$aaStopX) {
                            imagesetpixel($img, $cx + $xp * ($x1 - 1) + $xa, $cy + $yp * ($y) + $ya, $diffColor1);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2405..2411

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($stop < ($i + 1) * M_PI / 2 && $y <= $yStop) {
                        $diffColor1 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error1);
                        $x2         = $_x1;
                        if (!$aaStopX) {
                            imagesetpixel($img, $cx + $xp * ($x2 + 1) + $xa, $cy + $yp * $y + $ya, $diffColor1);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2372..2387

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            case CONSTRAIN_STARTEND:
                                if ($c1[1] < $c2[1]) {
                                    $link = new Image\GanttLink($c1[0], $c1[3], $c2[2], $c2[1]);
                                } else {
                                    $link = new Image\GanttLink($c1[0], $c1[1], $c2[2], $c2[3]);
Severity: Major
Found in src/graph/GanttGraph.php and 3 other locations - About 1 hr to fix
src/graph/GanttGraph.php on lines 856..864
src/graph/GanttGraph.php on lines 874..882
src/graph/GanttGraph.php on lines 883..891

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($sa < $ea) {
            while ($a <= 2 * M_PI) {
                $xp = floor($radius * cos($a) + $xc);
                $yp = floor($yc - $radius * sin($a));
                $coords .= ", ${xp}, ${yp}";
Severity: Major
Found in src/plot/PiePlotC.php and 1 other location - About 1 hr to fix
src/plot/PiePlot.php on lines 193..201

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            case CONSTRAIN_ENDEND:
                                if ($c1[1] < $c2[1]) {
                                    $link = new Image\GanttLink($c1[2], $c1[3], $c2[2], $c2[1]);
                                } else {
                                    $link = new Image\GanttLink($c1[2], $c1[1], $c2[2], $c2[3]);
Severity: Major
Found in src/graph/GanttGraph.php and 3 other locations - About 1 hr to fix
src/graph/GanttGraph.php on lines 856..864
src/graph/GanttGraph.php on lines 865..873
src/graph/GanttGraph.php on lines 883..891

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            case CONSTRAIN_STARTSTART:
                                if ($c1[1] < $c2[1]) {
                                    $link = new Image\GanttLink($c1[0], $c1[3], $c2[0], $c2[1]);
                                } else {
                                    $link = new Image\GanttLink($c1[0], $c1[1], $c2[0], $c2[3]);
Severity: Major
Found in src/graph/GanttGraph.php and 3 other locations - About 1 hr to fix
src/graph/GanttGraph.php on lines 856..864
src/graph/GanttGraph.php on lines 865..873
src/graph/GanttGraph.php on lines 874..882

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($sa < $ea) {
            while ($a <= 2 * M_PI) {
                $xp = floor($radius * cos($a) + $xc);
                $yp = floor($yc - $radius * sin($a));
                $coords .= ", ${xp}, ${yp}";
Severity: Major
Found in src/plot/PiePlot.php and 1 other location - About 1 hr to fix
src/plot/PiePlotC.php on lines 93..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

                            case CONSTRAIN_ENDSTART:
                                if ($c1[1] < $c2[1]) {
                                    $link = new Image\GanttLink($c1[2], $c1[3], $c2[0], $c2[1]);
                                } else {
                                    $link = new Image\GanttLink($c1[2], $c1[1], $c2[0], $c2[3]);
Severity: Major
Found in src/graph/GanttGraph.php and 3 other locations - About 1 hr to fix
src/graph/GanttGraph.php on lines 865..873
src/graph/GanttGraph.php on lines 874..882
src/graph/GanttGraph.php on lines 883..891

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($start > $i * M_PI / 2 && $x <= $xStart) {
                        $diffColor2 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error2);
                        $y2         = $_y2;
                        if ($aaStartX) {
                            imagesetpixel($img, $cx + $xp * $x + $xa, $cy + $yp * ($y2 - 1) + $ya, $diffColor2);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2305..2313

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 114.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($stop < ($i + 1) * M_PI / 2 && $x <= $xStop) {
                        $diffColor1 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error1);
                        $y2         = $_y1;
                        if ($aaStopX) {
                            imagesetpixel($img, $cx + $xp * $x + $xa, $cy + $yp * ($y2 - 1) + $ya, $diffColor1);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2260..2268

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 114.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

if (!\defined('MBTTF_DIR')) {
    if (\mb_strstr(\PHP_OS, 'WIN')) {
        if (empty(SYSTEMROOT)) {
            $t = new ErrMsgText();
            $msg = $t->Get(12, $file, $lineno);
Severity: Major
Found in src/config.inc.php and 1 other location - About 1 hr to fix
src/config.inc.php on lines 527..539

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this->iBuiltinIcon[11][1] =
            'iVBORw0KGgoAAAANSUhEUgAAACIAAAAiCAYAAAA6RwvCAAAABGdBTUEAALGPC/xhBQAAAAZiS0dEAAAAAAAA+UO7fwAAAAlwSFlz' .
            'AAALEAAACxABrSO9dQAAAAd0SU1FB9ECAQgFFyd9cRUAAAadSURBVHiczdhvbBP3Hcfx9/2xfefEOA5JoCNNnIT8AdtZmYBETJsI' .
            '6+jQOlQihT1AYgytqzZpD1atfyYqlT1h0lRpT7aRJ4NQpRvZGELVuo5Ua9jEJDIETQsNQyPBsUJMWGPnj//e+e72wNg4xElMR6ed' .
            'ZNln3933dZ/f93f6yfB/sgmrHdDV1WXlPg8NDZUDScD8LFFFEZZlWYZhWMFg0Orq6sq/gDJAfFy1iiZy9OjrVnj4JzQ1rMWqfxm/' .
Severity: Major
Found in src/image/PredefIcons.php and 1 other location - About 1 hr to fix
src/image/ImgData_Balls.php on lines 289..314

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

if (!\defined('TTF_DIR')) {
    if (\mb_strstr(\PHP_OS, 'WIN')) {
        if (empty(SYSTEMROOT)) {
            $t = new ErrMsgText();
            $msg = $t->Get(12, $file, $lineno);
Severity: Major
Found in src/config.inc.php and 1 other location - About 1 hr to fix
src/config.inc.php on lines 544..556

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this->imgdata_large[5][1] =
            'iVBORw0KGgoAAAANSUhEUgAAABoAAAAaCAMAAACelLz8AAABO1' .
            'BMVEX////////3///39/fv7+/e5+fW3t7Wzs7WxsbG1tbGzsbG' .
            'xsbDxMS/v7++wMC+v7+9zsa9xsa9vb29tbW9ra29pa24uLi1xs' .
            'a1vb21tbWxtrattbWmpqalra2cra2cpaWcnJycjIyUpaWUnJyU' .
Severity: Major
Found in src/image/ImgData_Balls.php and 1 other location - About 1 hr to fix
src/image/PredefIcons.php on lines 256..281

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 113.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ($adj < 1) {
                $m = ($adj - 1.0) * max(255, max($r, max($g, $b)));

                return [max(0, $r + $m), max(0, $g + $m), max(0, $b + $m), $alpha];
            }
Severity: Major
Found in src/util/RGB.php and 1 other location - About 1 hr to fix
src/image/RGB.php on lines 546..550

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            if ($adj < 1) {
                $m = ($adj - 1.0) * max(255, max($r, max($g, $b)));

                return [max(0, $r + $m), max(0, $g + $m), max(0, $b + $m), $alpha];
            }
Severity: Major
Found in src/image/RGB.php and 1 other location - About 1 hr to fix
src/util/RGB.php on lines 536..540

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public function __get($name)
    {
        if (strpos($name, 'raw_') !== false) {
            // if $name == 'raw_left_margin' , return $this->_left_margin;
            $variable_name = '_' . str_replace('raw_', '', $name);
Severity: Major
Found in src/text/Text.php and 1 other location - About 1 hr to fix
src/image/Image.php on lines 2129..2144

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public function __get($name)
    {
        if (strpos($name, 'raw_') !== false) {
            // if $name == 'raw_left_margin' , return $this->_left_margin;
            $variable_name = '_' . str_replace('raw_', '', $name);
Severity: Major
Found in src/image/Image.php and 1 other location - About 1 hr to fix
src/text/Text.php on lines 393..408

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language