Sign upLogin

KarrLab/datanator_frontend

View on GitHub
Star

Showing 238 of 403 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  formatResults(data, organism) {
    const results = data["sabio_reaction_entries"];
    const numResults = data["sabio_reaction_entries_total"]["value"];

    const formattedResults = [];
Severity: Major
Found in src/scenes/SearchResults/ReactionSearchResultsList.js and 1 other location - About 3 days to fix
src/scenes/BiochemicalEntityDetails/Metabolite/ReactionSearchResultsList.js on lines 22..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 569.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  formatResults(data, organism) {
    const results = data["sabio_reaction_entries"];
    const numResults = data["sabio_reaction_entries_total"]["value"];

    const formattedResults = [];
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Metabolite/ReactionSearchResultsList.js and 1 other location - About 3 days to fix
src/scenes/SearchResults/ReactionSearchResultsList.js on lines 30..105

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 569.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (this.props.filtered.values != null) {
      let measurements = this.props.filtered.values || [];
      let dataForBoxPlot = measurements;
      let dataForScatterPlot = [];
      for (const measurement of measurements) {
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/MeasurementsBoxScatterPlot/MeasurementsBoxScatterPlot.js and 1 other location - About 1 day to fix
src/scenes/BiochemicalEntityDetails/MeasurementsBoxScatterPlot/MeasurementsBoxScatterPlot.js on lines 185..210

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 255.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (this.props.selected.values != null) {
      let measurements = this.props.selected.values || [];
      let dataForBoxPlot = measurements;
      let dataForScatterPlot = [];
      for (const measurement of measurements) {
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/MeasurementsBoxScatterPlot/MeasurementsBoxScatterPlot.js and 1 other location - About 1 day to fix
src/scenes/BiochemicalEntityDetails/MeasurementsBoxScatterPlot/MeasurementsBoxScatterPlot.js on lines 157..182

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 255.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  fetchResults() {
    const url = this.props["get-results-url"](
      this.query,
      this.pageCount,
      this.props["page-size"]
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Metabolite/SearchResultsList.js and 1 other location - About 1 day to fix
src/scenes/SearchResults/SearchResultsList.js on lines 74..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 227.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

  fetchResults() {
    const url = this.props["get-results-url"](
      this.query,
      this.pageCount,
      this.props["page-size"]
Severity: Major
Found in src/scenes/SearchResults/SearchResultsList.js and 1 other location - About 1 day to fix
src/scenes/BiochemicalEntityDetails/Metabolite/SearchResultsList.js on lines 74..105

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 227.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for (const kiMet of kiMets) {
      colDefs.push({
        headerName: "K_I " + kiMet + " value",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js and 1 other location - About 1 day to fix
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 323..354

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 213.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    for (const kmMet of kmMets) {
      colDefs.push({
        headerName: "K_M " + kmMet + " value",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js and 1 other location - About 1 day to fix
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 366..397

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 213.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        <div className="content-block-content">
          {results == null && <div className="loader"></div>}

          {results != null && (
            <div>
Severity: Major
Found in src/scenes/SearchResults/SearchResultsList.js and 1 other location - About 7 hrs to fix
src/scenes/BiochemicalEntityDetails/Metabolite/SearchResultsList.js on lines 141..170

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      <div
        className="content-container-search-results-scene content-block section"
        id={this.props["html-anchor-id"]}
      >
        {results == null && <div className="loader"></div>}
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Metabolite/SearchResultsList.js and 1 other location - About 7 hrs to fix
src/scenes/SearchResults/SearchResultsList.js on lines 149..175

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            <div className="section-columns section-2-columns">
              <div className="section section-column" id="immediate-source">
                <h2 className="content-block-heading">
                  Immediate sources of the measurements
                </h2>
Severity: Major
Found in src/scenes/Stats/Stats.js and 1 other location - About 7 hrs to fix
src/scenes/Stats/Stats.js on lines 333..357

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 191.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            <div className="section-columns section-2-columns">
              <div className="section section-column" id="data-type">
                <h2 className="content-block-heading">
                  Distribution of the types of the measurements
                </h2>
Severity: Major
Found in src/scenes/Stats/Stats.js and 1 other location - About 7 hrs to fix
src/scenes/Stats/Stats.js on lines 393..417

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 191.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

              <div className="vertical-workflow-el">
                <div className="vertical-workflow-el-line"></div>
                <div className="vertical-workflow-el-icon-container">
                  <LazyLoad>
                    <object
Severity: Major
Found in src/scenes/Home/Home.js and 2 other locations - About 6 hrs to fix
src/scenes/Home/Home.js on lines 658..680
src/scenes/Home/Home.js on lines 682..705

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

              <div className="vertical-workflow-el">
                <div className="vertical-workflow-el-line"></div>
                <div className="vertical-workflow-el-icon-container">
                  <LazyLoad>
                    <object
Severity: Major
Found in src/scenes/Home/Home.js and 2 other locations - About 6 hrs to fix
src/scenes/Home/Home.js on lines 632..656
src/scenes/Home/Home.js on lines 658..680

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

              <div className="vertical-workflow-el vertical-workflow-el-analyze">
                <div className="vertical-workflow-el-line"></div>
                <div className="vertical-workflow-el-icon-container">
                  <LazyLoad>
                    <object
Severity: Major
Found in src/scenes/Home/Home.js and 2 other locations - About 6 hrs to fix
src/scenes/Home/Home.js on lines 632..656
src/scenes/Home/Home.js on lines 682..705

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 170.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      {
        headerName: "Taxonomic similarity",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
          name: (
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Gene/ProteinModificationDataTable.js and 4 other locations - About 6 hrs to fix
src/scenes/BiochemicalEntityDetails/Gene/ProteinAbundanceDataTable.js on lines 225..254
src/scenes/BiochemicalEntityDetails/Gene/RnaHalfLifeDataTable.js on lines 277..306
src/scenes/BiochemicalEntityDetails/Gene/RnaModificationDataTable.js on lines 149..178
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 488..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 168.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      {
        headerName: "Taxonomic similarity",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
          name: (
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Gene/RnaHalfLifeDataTable.js and 4 other locations - About 6 hrs to fix
src/scenes/BiochemicalEntityDetails/Gene/ProteinAbundanceDataTable.js on lines 225..254
src/scenes/BiochemicalEntityDetails/Gene/ProteinModificationDataTable.js on lines 240..269
src/scenes/BiochemicalEntityDetails/Gene/RnaModificationDataTable.js on lines 149..178
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 488..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 168.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    colDefs.push({
      headerName: "Taxonomic similarity",
      headerComponentFramework: HtmlColumnHeader,
      headerComponentParams: {
        name: (
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js and 4 other locations - About 6 hrs to fix
src/scenes/BiochemicalEntityDetails/Gene/ProteinAbundanceDataTable.js on lines 225..254
src/scenes/BiochemicalEntityDetails/Gene/ProteinModificationDataTable.js on lines 240..269
src/scenes/BiochemicalEntityDetails/Gene/RnaHalfLifeDataTable.js on lines 277..306
src/scenes/BiochemicalEntityDetails/Gene/RnaModificationDataTable.js on lines 149..178

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 168.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      {
        headerName: "Taxonomic similarity",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
          name: (
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Gene/ProteinAbundanceDataTable.js and 4 other locations - About 6 hrs to fix
src/scenes/BiochemicalEntityDetails/Gene/ProteinModificationDataTable.js on lines 240..269
src/scenes/BiochemicalEntityDetails/Gene/RnaHalfLifeDataTable.js on lines 277..306
src/scenes/BiochemicalEntityDetails/Gene/RnaModificationDataTable.js on lines 149..178
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 488..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 168.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

      {
        headerName: "Taxonomic similarity",
        headerComponentFramework: HtmlColumnHeader,
        headerComponentParams: {
          name: (
Severity: Major
Found in src/scenes/BiochemicalEntityDetails/Gene/RnaModificationDataTable.js and 4 other locations - About 6 hrs to fix
src/scenes/BiochemicalEntityDetails/Gene/ProteinAbundanceDataTable.js on lines 225..254
src/scenes/BiochemicalEntityDetails/Gene/ProteinModificationDataTable.js on lines 240..269
src/scenes/BiochemicalEntityDetails/Gene/RnaHalfLifeDataTable.js on lines 277..306
src/scenes/BiochemicalEntityDetails/Reaction/RateConstantsDataTable.js on lines 488..517

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 168.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language