Sign upLogin

Katello/katello

View on GitHub
Star

Showing 1,760 of 2,737 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const ContentViewFiltersRoutes = ({ cvId, details }) => (
  <>
    <Route exact path="/filters">
      <ContentViewFilters cvId={cvId} details={details} />
    </Route>
Severity: Major
Found in webpack/scenes/ContentViews/Details/Filters/index.js and 1 other location - About 3 hrs to fix
webpack/scenes/ContentViews/Details/Versions/index.js on lines 7..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        {importOnly &&
          <>
            <TextListItem component={TextListItemVariants.dt}>
              {LabelImportOnly()}
            </TextListItem>
Severity: Major
Found in webpack/scenes/ContentViews/Details/ContentViewInfo.js and 1 other location - About 3 hrs to fix
webpack/scenes/ContentViews/Details/ContentViewInfo.js on lines 130..145

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const ContentViewVersionsRoutes = ({ cvId, details }) => (
  <>
    <Route exact path="/versions">
      <ContentViewVersions cvId={cvId} details={details} />
    </Route>
Severity: Major
Found in webpack/scenes/ContentViews/Details/Versions/index.js and 1 other location - About 3 hrs to fix
webpack/scenes/ContentViews/Details/Filters/index.js on lines 7..16

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $scope.verifyChecksumProducts = function () {
            var success;

            success = function (task) {
                var message = translate("Product verify checksum has been initiated in the background.");
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/products/products.controller.js and 1 other location - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/products/products.controller.js on lines 93..106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        {generatedContentView &&
          <>
            <TextListItem component={TextListItemVariants.dt}>
              {LabelGenerated()}
            </TextListItem>
Severity: Major
Found in webpack/scenes/ContentViews/Details/ContentViewInfo.js and 1 other location - About 3 hrs to fix
webpack/scenes/ContentViews/Details/ContentViewInfo.js on lines 114..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 111.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/debs/deb.factory.js and 4 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/ansible-collections/ansible-collections.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/files/file.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/module-streams/module-stream.factory.js on lines 1..27
engines/bastion_katello/app/assets/javascripts/bastion_katello/package-groups/package-group.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/package-groups/package-group.factory.js and 4 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/ansible-collections/ansible-collections.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/debs/deb.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/files/file.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/module-streams/module-stream.factory.js on lines 1..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/ansible-collections/ansible-collections.factory.js and 4 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/debs/deb.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/files/file.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/module-streams/module-stream.factory.js on lines 1..27
engines/bastion_katello/app/assets/javascripts/bastion_katello/package-groups/package-group.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/files/file.factory.js and 4 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/ansible-collections/ansible-collections.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/debs/deb.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/module-streams/module-stream.factory.js on lines 1..27
engines/bastion_katello/app/assets/javascripts/bastion_katello/package-groups/package-group.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/module-streams/module-stream.factory.js and 4 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/ansible-collections/ansible-collections.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/debs/deb.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/files/file.factory.js on lines 1..28
engines/bastion_katello/app/assets/javascripts/bastion_katello/package-groups/package-group.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        <ActionGroup>
          <Button
            ouiaId="edit-acs-smart-proxies-submit"
            aria-label="edit-acs-smart-proxies"
            variant="primary"
Severity: Major
Found in webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditSmartProxies.js and 2 other locations - About 3 hrs to fix
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditCredentials.js on lines 315..334
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditProducts.js on lines 89..108

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        <ActionGroup>
          <Button
            ouiaId="edit-acs-products-submit"
            aria-label="edit-acs-products"
            variant="primary"
Severity: Major
Found in webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditProducts.js and 2 other locations - About 3 hrs to fix
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditCredentials.js on lines 315..334
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditSmartProxies.js on lines 119..138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    $stateProvider.state('product.tasks', {
        abstract: true,
        template: '<div ui-view></div>'
    })
    .state('product.tasks.index', {
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/products/products.routes.js and 2 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/content-hosts/content-hosts.routes.js on lines 78..100
engines/bastion_katello/app/assets/javascripts/bastion_katello/products/details/repositories/repositories.routes.js on lines 166..188

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    $stateProvider.state('content-host.tasks', {
        abstract: true,
        template: '<div ui-view></div>'
    })
    .state('content-host.tasks.index', {
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/content-hosts/content-hosts.routes.js and 2 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/products/details/repositories/repositories.routes.js on lines 166..188
engines/bastion_katello/app/assets/javascripts/bastion_katello/products/products.routes.js on lines 90..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        $stateProvider.state('product.repository.tasks', {
            abstract: true,
            template: '<div ui-view></div>'
        })
        .state('product.repository.tasks.index', {
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/products/details/repositories/repositories.routes.js and 2 other locations - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/content-hosts/content-hosts.routes.js on lines 78..100
engines/bastion_katello/app/assets/javascripts/bastion_katello/products/products.routes.js on lines 90..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/docker-manifests/docker-manifest.factory.js and 1 other location - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/docker-manifest-lists/docker-manifest-list.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        <ActionGroup>
          <Button
            ouiaId="edit-acs-credentials-submit"
            aria-label="edit_acs_credentials"
            variant="primary"
Severity: Major
Found in webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditCredentials.js and 2 other locations - About 3 hrs to fix
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditProducts.js on lines 89..108
webpack/scenes/AlternateContentSources/Details/EditModals/ACSEditSmartProxies.js on lines 119..138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

(function () {
    'use strict';

    /**
     * @ngdoc factory
Severity: Major
Found in engines/bastion_katello/app/assets/javascripts/bastion_katello/docker-manifest-lists/docker-manifest-list.factory.js and 1 other location - About 3 hrs to fix
engines/bastion_katello/app/assets/javascripts/bastion_katello/docker-manifests/docker-manifest.factory.js on lines 1..26

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 110.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

export const addCVFilterRule = (filterId, params, handleSuccess) => post({
  type: API_OPERATIONS.POST,
  key: ADD_CONTENT_VIEW_FILTER_RULE,
  url: api.getApiUrl(`/content_view_filters/${filterId}/rules`),
  params,
Severity: Major
Found in webpack/scenes/ContentViews/Details/ContentViewDetailActions.js and 1 other location - About 3 hrs to fix
webpack/scenes/ContentViews/Details/ContentViewDetailActions.js on lines 267..275

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      <TableIndexPage
        columns={columns}
        showCheckboxes
        apiUrl={ERRATA_URL}
        apiOptions={apiOptions}
Severity: Major
Found in webpack/components/extensions/Hosts/BulkActions/BulkErrataWizard/02_BulkErrataTable.js and 1 other location - About 3 hrs to fix
webpack/components/extensions/Hosts/BulkActions/BulkPackagesWizard/02_BulkPackagesTable.js on lines 131..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language