Sign upLogin

LearnPAd/learnpad

View on GitHub
Star

Showing 1,823 of 4,261 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        while (idx--) {
            var key = keys[idx],
                val = schema.properties[key];
            report.path.push("properties");
            report.path.push(key);
Severity: Major
Found in lp-simulation-environment/simulator/src/main/resources/static/deps/opt/ZSchema-browser.js and 1 other location - About 3 hrs to fix
lp-simulation-environment/simulator/src/main/resources/static/deps/opt/ZSchema-browser.js on lines 1734..1742

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            while (idx--) {
                var key = keys[idx],
                    val = schema.definitions[key];
                report.path.push("definitions");
                report.path.push(key);
Severity: Major
Found in lp-simulation-environment/simulator/src/main/resources/static/deps/opt/ZSchema-browser.js and 1 other location - About 3 hrs to fix
lp-simulation-environment/simulator/src/main/resources/static/deps/opt/ZSchema-browser.js on lines 1507..1515

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 103.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Override
    public void eSet(int featureID, Object newValue) {
        switch (featureID) {
            case XwikiPackage.ATTACHMENT__ID:
                setId((String)newValue);
Severity: Major
Found in lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/AttachmentImpl.java and 2 other locations - About 3 hrs to fix
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/HistorySummaryImpl.java on lines 659..700
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/ObjectSummaryImpl.java on lines 623..664

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 211.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Override
    public void eSet(int featureID, Object newValue) {
        switch (featureID) {
            case XwikiPackage.OBJECT_SUMMARY__ID:
                setId((String)newValue);
Severity: Major
Found in lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/ObjectSummaryImpl.java and 2 other locations - About 3 hrs to fix
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/AttachmentImpl.java on lines 625..666
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/HistorySummaryImpl.java on lines 659..700

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 211.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    @Override
    public void eSet(int featureID, Object newValue) {
        switch (featureID) {
            case XwikiPackage.HISTORY_SUMMARY__PAGE_ID:
                setPageId((String)newValue);
Severity: Major
Found in lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/HistorySummaryImpl.java and 2 other locations - About 3 hrs to fix
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/AttachmentImpl.java on lines 625..666
lp-model-transformer/src/main/java/eu/learnpad/transformations/metamodel_corpus/xwiki/impl/ObjectSummaryImpl.java on lines 623..664

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 211.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                        if(by = args.points.by){
                            var xy = e.getXY();
                            pts = e.translatePoints([xy[0]+by[0], xy[1]+by[1]]);
                        }else{
                            pts = e.translatePoints(args.points.to);
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/jquery/ext-jquery-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js on lines 1704..1709

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        FLOAT: {
            convert: function(v){
                return v !== undefined && v !== null && v !== '' ?
                    parseFloat(String(v).replace(Ext.data.Types.stripRe, ''), 10) : (this.useNull ? null : 0);
            },
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/pkgs/data-foundation-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/pkgs/data-foundation-debug.js on lines 4715..4722

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                        if(by = args.points.by){
                            var xy = e.getXY();
                            pts = e.translatePoints([xy[0]+by[0], xy[1]+by[1]]);
                        }else{
                            pts = e.translatePoints(args.points.to);
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/jquery/ext-jquery-adapter-debug.js on lines 1657..1662

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        INT: {
            convert: function(v){
                return v !== undefined && v !== null && v !== '' ?
                    parseInt(String(v).replace(Ext.data.Types.stripRe, ''), 10) : (this.useNull ? null : 0);
            },
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/pkgs/data-foundation-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/pkgs/data-foundation-debug.js on lines 4730..4737

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                for (FlowElement fe : process.getFlowElements()) {
                    if(fe instanceof SubProcess){
                        SubProcess sub = (SubProcess) fe;
                        //System.out.format("Found a SubProcess: %s\n", sub.getName());
                        i = this.searchSubProcess(sub, ret, i);
Severity: Major
Found in lp-model-verification/verification-component-understandability-plugin/src/main/java/eu/learnpad/verification/plugin/bpmn/guideline/impl/notationusage/SplitAndJoinFlows.java and 1 other location - About 3 hrs to fix
lp-model-verification/verification-component-understandability-plugin/src/main/java/eu/learnpad/verification/plugin/bpmn/guideline/impl/notationusage/SplitAndJoinFlows.java on lines 73..93

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 210.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        for ( FlowElement fe : sub.getFlowElements()) {
            if(fe instanceof SubProcess){
                SubProcess ssub = (SubProcess) fe;
                //System.out.format("Found a SubProcess: %s\n", ssub.getName());
                i = this.searchSubProcess(ssub, ret, i);
Severity: Major
Found in lp-model-verification/verification-component-understandability-plugin/src/main/java/eu/learnpad/verification/plugin/bpmn/guideline/impl/notationusage/SplitAndJoinFlows.java and 1 other location - About 3 hrs to fix
lp-model-verification/verification-component-understandability-plugin/src/main/java/eu/learnpad/verification/plugin/bpmn/guideline/impl/notationusage/SplitAndJoinFlows.java on lines 39..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 210.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static byte[] toByteArrayEfficient(InputStream is) throws Exception{
        
        int totEstimatedLength = is.available();
        int DEFAULT_BUFFER_SIZE = totEstimatedLength;
        if(DEFAULT_BUFFER_SIZE == 0)
Severity: Major
Found in lp-model-verification/verification-component/src/main/java/eu/learnpad/verification/utils/IOUtils.java and 1 other location - About 3 hrs to fix
lp-model-verification/verification-component-deadlock-plugin/src/main/java/eu/learnpad/verification/plugin/utils/IOUtils.java on lines 83..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static byte[] toByteArrayEfficient(InputStream is) throws Exception{
        
        int totEstimatedLength = is.available();
        int DEFAULT_BUFFER_SIZE = totEstimatedLength;
        if(DEFAULT_BUFFER_SIZE == 0)
Severity: Major
Found in lp-model-verification/verification-component-deadlock-plugin/src/main/java/eu/learnpad/verification/plugin/utils/IOUtils.java and 1 other location - About 3 hrs to fix
lp-model-verification/verification-component/src/main/java/eu/learnpad/verification/utils/IOUtils.java on lines 69..96

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

if(Ext.isIE) {
    function fnCleanUp() {
        var p = Function.prototype;
        delete p.createSequence;
        delete p.defer;
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/jquery/ext-jquery-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js on lines 1833..1845

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

if(Ext.isIE) {
    function fnCleanUp() {
        var p = Function.prototype;
        delete p.createSequence;
        delete p.defer;
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/jquery/ext-jquery-adapter-debug.js on lines 1804..1816

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

/**
 * 
 */
package gate.creole.ontology.impl;
Severity: Major
Found in lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MaxCardinalityRestrictionImpl.java and 2 other locations - About 3 hrs to fix
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/CardinalityRestrictionImpl.java on lines 1..88
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MinCardinalityRestrictionImpl.java on lines 1..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

/**
 * 
 */
package gate.creole.ontology.impl;
Severity: Major
Found in lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/CardinalityRestrictionImpl.java and 2 other locations - About 3 hrs to fix
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MaxCardinalityRestrictionImpl.java on lines 1..85
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MinCardinalityRestrictionImpl.java on lines 1..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

/**
 * 
 */
package gate.creole.ontology.impl;
Severity: Major
Found in lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MinCardinalityRestrictionImpl.java and 2 other locations - About 3 hrs to fix
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/CardinalityRestrictionImpl.java on lines 1..88
lp-ontology-recommender/src/main/resources/gate/plugins/Ontology/src/gate/creole/ontology/impl/MaxCardinalityRestrictionImpl.java on lines 1..85

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if((eventName == 'mouseenter' || eventName == 'mouseleave') && !mouseEnterSupported){
            var item = mouseCache[el.id] || (mouseCache[el.id] = {});
            item[eventName] = fn;
            fn = fn.createInterceptor(checkRelatedTarget);
            eventName = (eventName == 'mouseenter') ? 'mouseover' : 'mouseout';
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/yui/ext-yui-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js on lines 1480..1485

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if((eventName == 'mouseenter' || eventName == 'mouseleave') && !mouseEnterSupported){
            var item = mouseCache[el.id] || (mouseCache[el.id] = {});
            item[eventName] = fn;
            fn = fn.createInterceptor(checkRelatedTarget);
            eventName = (eventName == 'mouseenter') ? 'mouseover' : 'mouseout';
Severity: Major
Found in lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/prototype/ext-prototype-adapter-debug.js and 1 other location - About 3 hrs to fix
lp-dashboard-kpi/lp-dash-adoxx-cockpit/src/main/webapp/ext-3.4.0/adapter/yui/ext-yui-adapter-debug.js on lines 1416..1421

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language