Sign upLogin

MPOS/php-mpos

View on GitHub
Star

Showing 200 of 1,089 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function yy_r42(){
    $tag = trim(substr($this->yystack[$this->yyidx + -1]->minor,$this->lex->ldel_length)); 
    $this->_retvalue = $this->compiler->compileTag(($tag == 'else if')? 'elseif' : $tag,array(),array('if condition'=>$this->yystack[$this->yyidx + 0]->minor));
    }
Severity: Major
Found in include/smarty/libs/sysplugins/smarty_internal_templateparser.php and 1 other location - About 1 hr to fix
include/smarty/libs/sysplugins/smarty_internal_templateparser.php on lines 2421..2424

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function yy_r44(){
    $tag = trim(substr($this->yystack[$this->yyidx + -1]->minor,$this->lex->ldel_length));
    $this->_retvalue = $this->compiler->compileTag(($tag == 'else if')? 'elseif' : $tag,array(),array('if condition'=>$this->yystack[$this->yyidx + 0]->minor));
    }
Severity: Major
Found in include/smarty/libs/sysplugins/smarty_internal_templateparser.php and 1 other location - About 1 hr to fix
include/smarty/libs/sysplugins/smarty_internal_templateparser.php on lines 2409..2412

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  public function getAllActive() {
    $this->debug->append("STA " . __METHOD__, 4);
    $stmt = $this->mysqli->prepare("SELECT n.*, a.username AS author FROM $this->table AS n LEFT JOIN " . $this->user->getTableName() . " AS a ON a.id = n.account_id WHERE active = 1 ORDER BY time DESC");
    if ($stmt && $stmt->execute() && $result = $stmt->get_result())
      return $result->fetch_all(MYSQLI_ASSOC);
Severity: Minor
Found in include/classes/news.class.php and 1 other location - About 1 hr to fix
include/classes/news.class.php on lines 53..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  public function getAll() {
    $this->debug->append("STA " . __METHOD__, 4);
    $stmt = $this->mysqli->prepare("SELECT n.*, a.username AS author FROM $this->table AS n LEFT JOIN " . $this->user->getTableName() . " AS a ON a.id = n.account_id ORDER BY time DESC");
    if ($stmt && $stmt->execute() && $result = $stmt->get_result())
      return $result->fetch_all(MYSQLI_ASSOC);
Severity: Minor
Found in include/classes/news.class.php and 1 other location - About 1 hr to fix
include/classes/news.class.php on lines 42..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if (substr($code, -1) == '?') {
                $subtree = $this->subtrees[$key]->to_smarty_php();
                if (substr($subtree, 0, 1) == '>') {
                    $code = substr($code, 0, strlen($code) - 1) . '?<?php ?>>' . substr($subtree, 1);
                } else {
Severity: Minor
Found in include/smarty/libs/sysplugins/smarty_internal_parsetree.php and 1 other location - About 55 mins to fix
include/smarty/libs/sysplugins/smarty_internal_parsetree.php on lines 303..311

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 99.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($this->parser->asp_tags && substr($code, -1) == '%') {
                $subtree = $this->subtrees[$key]->to_smarty_php();
                if (substr($subtree, 0, 1) == '>') {
                    $code = substr($code, 0, strlen($code) - 1) . '%<?php ?>>' . substr($subtree, 1);
                } else {
Severity: Minor
Found in include/smarty/libs/sysplugins/smarty_internal_parsetree.php and 1 other location - About 55 mins to fix
include/smarty/libs/sysplugins/smarty_internal_parsetree.php on lines 312..320

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 99.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            foreach (array('H' => 'Hour',  'i' => 'Minute', 's' => 'Second') as $_elementKey => $_elementName) {
                $_variableName = '_' . strtolower($_elementName);
                $$_variableName = isset($params['time'][$field_array][$prefix . $_elementName])
                    ? $params['time'][$field_array][$prefix . $_elementName]
                    : date($_elementKey);
Severity: Minor
Found in include/smarty/libs/plugins/function.html_select_time.php and 1 other location - About 55 mins to fix
include/smarty/libs/plugins/function.html_select_date.php on lines 193..198

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            foreach (array('Y' => 'Year',  'm' => 'Month', 'd' => 'Day') as $_elementKey => $_elementName) {
                $_variableName = '_' . strtolower($_elementName);
                $$_variableName = isset($params['time'][$field_array][$prefix . $_elementName])
                    ? $params['time'][$field_array][$prefix . $_elementName]
                    : date($_elementKey);
Severity: Minor
Found in include/smarty/libs/plugins/function.html_select_date.php and 1 other location - About 55 mins to fix
include/smarty/libs/plugins/function.html_select_time.php on lines 167..172

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 98.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        switch ($mode) {
            case self::MODE_WRITE:
                $fp = $this->_getHandle($nsKey, $itemKey, self::POSITION_START);
                break;
            case self::MODE_APPEND:
Severity: Minor
Found in include/lib/swiftmailer/classes/Swift/KeyCache/DiskKeyCache.php and 1 other location - About 50 mins to fix
include/lib/swiftmailer/classes/Swift/KeyCache/DiskKeyCache.php on lines 89..102

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        switch ($mode) {
            case self::MODE_WRITE:
                $fp = $this->_getHandle($nsKey, $itemKey, self::POSITION_START);
                break;
            case self::MODE_APPEND:
Severity: Minor
Found in include/lib/swiftmailer/classes/Swift/KeyCache/DiskKeyCache.php and 1 other location - About 50 mins to fix
include/lib/swiftmailer/classes/Swift/KeyCache/DiskKeyCache.php on lines 122..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_graphs_statistics', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/statistics/graphs.inc.php and 5 other locations - About 45 mins to fix
include/pages/about/pool.inc.php on lines 5..18
include/pages/statistics/blockfinder.inc.php on lines 18..31
include/pages/statistics/blocks.inc.php on lines 94..107
include/pages/statistics/pool.inc.php on lines 84..97
include/pages/statistics/round.inc.php on lines 51..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($listHeaders as $hName) {
            // Check if we need to ignore Header
            if (! isset($this->_ignoredHeaders[strtolower($hName)])) {
                if ($headers->has($hName)) {
                    $tmp = $headers->getAll($hName);
Severity: Minor
Found in include/lib/swiftmailer/classes/Swift/Signers/DKIMSigner.php and 1 other location - About 45 mins to fix
include/lib/swiftmailer/classes/Swift/Signers/DomainKeySigner.php on lines 368..381

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_about_page', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/about/pool.inc.php and 5 other locations - About 45 mins to fix
include/pages/statistics/blockfinder.inc.php on lines 18..31
include/pages/statistics/blocks.inc.php on lines 94..107
include/pages/statistics/graphs.inc.php on lines 14..27
include/pages/statistics/pool.inc.php on lines 84..97
include/pages/statistics/round.inc.php on lines 51..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_pool_statistics', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/statistics/pool.inc.php and 5 other locations - About 45 mins to fix
include/pages/about/pool.inc.php on lines 5..18
include/pages/statistics/blockfinder.inc.php on lines 18..31
include/pages/statistics/blocks.inc.php on lines 94..107
include/pages/statistics/graphs.inc.php on lines 14..27
include/pages/statistics/round.inc.php on lines 51..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_block_statistics', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/statistics/blocks.inc.php and 5 other locations - About 45 mins to fix
include/pages/about/pool.inc.php on lines 5..18
include/pages/statistics/blockfinder.inc.php on lines 18..31
include/pages/statistics/graphs.inc.php on lines 14..27
include/pages/statistics/pool.inc.php on lines 84..97
include/pages/statistics/round.inc.php on lines 51..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_round_statistics', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/statistics/round.inc.php and 5 other locations - About 45 mins to fix
include/pages/about/pool.inc.php on lines 5..18
include/pages/statistics/blockfinder.inc.php on lines 18..31
include/pages/statistics/blocks.inc.php on lines 94..107
include/pages/statistics/graphs.inc.php on lines 14..27
include/pages/statistics/pool.inc.php on lines 84..97

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

switch($setting->getValue('acl_blockfinder_statistics', 1)) {
case '0':
  if ($user->isAuthenticated()) {
    $smarty->assign("CONTENT", "default.tpl");
  }
Severity: Major
Found in include/pages/statistics/blockfinder.inc.php and 5 other locations - About 45 mins to fix
include/pages/about/pool.inc.php on lines 5..18
include/pages/statistics/blocks.inc.php on lines 94..107
include/pages/statistics/graphs.inc.php on lines 14..27
include/pages/statistics/pool.inc.php on lines 84..97
include/pages/statistics/round.inc.php on lines 51..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($listHeaders as $hName) {
            // Check if we need to ignore Header
            if (! isset($this->_ignoredHeaders[strtolower($hName)])) {
                if ($headers->has($hName)) {
                    $tmp = $headers->getAll($hName);
Severity: Minor
Found in include/lib/swiftmailer/classes/Swift/Signers/DomainKeySigner.php and 1 other location - About 45 mins to fix
include/lib/swiftmailer/classes/Swift/Signers/DKIMSigner.php on lines 491..504

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

          $(this._element).find('li.' + this._config.activeClass).has('ul').children('ul').attr('aria-expanded', true).addClass(this._config.collapseClass + ' ' + this._config.collapseInClass);
Severity: Minor
Found in public/site_assets/bootstrap/js/plugins/metisMenu/jquery.metisMenu.js and 1 other location - About 45 mins to fix
public/site_assets/bootstrap/js/plugins/metisMenu/jquery.metisMenu.js on lines 187..187

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            $(this._element).find('li.' + this._config.activeClass).has('ul').children('a').addClass('doubleTapToGo');
Severity: Minor
Found in public/site_assets/bootstrap/js/plugins/metisMenu/jquery.metisMenu.js and 1 other location - About 45 mins to fix
public/site_assets/bootstrap/js/plugins/metisMenu/jquery.metisMenu.js on lines 181..181

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language