Sign upLogin

Naimikan/angular-mapboxgl-directive

View on GitHub
Star

Showing 62 of 98 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function checkLayersToBeRemoved (layers) {
      var defer = $q.defer();

      var layersIds = [];
Severity: Major
Found in src/directives/glLayers.js and 1 other location - About 1 day to fix
src/directives/glSources.js on lines 17..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 334.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function checkSourcesToBeRemoved (sources) {
      var defer = $q.defer();

      var sourcesIds = [];
Severity: Major
Found in src/directives/glSources.js and 1 other location - About 1 day to fix
src/directives/glLayers.js on lines 121..155

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 334.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').factory('mapboxglImageUtils', ['Utils', 'mapboxglConstants', function (Utils, mapboxglConstants) {
    function createImageByObject (map, object) {
        Utils.checkObjects([
      {
        name: 'Map',
Severity: Major
Found in src/factories/mapboxglImageUtils.js and 1 other location - About 1 day to fix
src/factories/mapboxglVideoUtils.js on lines 1..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 302.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').factory('mapboxglVideoUtils', ['Utils', 'mapboxglConstants', function (Utils, mapboxglConstants) {
  function createVideoByObject (map, object) {
    Utils.checkObjects([
      {
        name: 'Map',
Severity: Major
Found in src/factories/mapboxglVideoUtils.js and 1 other location - About 1 day to fix
src/factories/mapboxglImageUtils.js on lines 1..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 302.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').directive('glPitch', [function () {
    function mapboxGlPitchDirectiveLink (scope, element, attrs, controller) {
        if (!controller) {
            throw new Error('Invalid angular-mapboxgl-directive controller');
        }
Severity: Major
Found in src/directives/glPitch.js and 1 other location - About 1 day to fix
src/directives/glZoom.js on lines 1..31

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 237.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').directive('glZoom', [function () {
    function mapboxGlZoomDirectiveLink (scope, element, attrs, controller) {
        if (!controller) {
            throw new Error('Invalid angular-mapboxgl-directive controller');
        }
Severity: Major
Found in src/directives/glZoom.js and 1 other location - About 1 day to fix
src/directives/glPitch.js on lines 1..31

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 237.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').directive('glMinZoom', [function () {
    function mapboxGlMinZoomDirectiveLink (scope, element, attrs, controller) {
        if (!controller) {
            throw new Error('Invalid angular-mapboxgl-directive controller');
        }
Severity: Major
Found in src/directives/glMinZoom.js and 1 other location - About 1 day to fix
src/directives/glMaxZoom.js on lines 1..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 201.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

angular.module('mapboxgl-directive').directive('glMaxZoom', [function () {
    function mapboxGlMaxZoomDirectiveLink (scope, element, attrs, controller) {
        if (!controller) {
            throw new Error('Invalid angular-mapboxgl-directive controller');
        }
Severity: Major
Found in src/directives/glMaxZoom.js and 1 other location - About 1 day to fix
src/directives/glMinZoom.js on lines 1..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 201.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        var imagenWatched = function (map, controller, image) {
      if (angular.isDefined(image)) {
        if (Object.prototype.toString.call(image) === Object.prototype.toString.call({})) {
          mapboxglImageUtils.createImageByObject(map, image);
          controller.addImageObject(image);
Severity: Major
Found in src/directives/glImage.js and 1 other location - About 7 hrs to fix
src/directives/glVideo.js on lines 11..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        var videoWatched = function (map, controller, video) {
      if (angular.isDefined(video)) {
        if (Object.prototype.toString.call(video) === Object.prototype.toString.call({})) {
          mapboxglVideoUtils.createVideoByObject(map, video);
          controller.addVideoObject(video);
Severity: Major
Found in src/directives/glVideo.js and 1 other location - About 7 hrs to fix
src/directives/glImage.js on lines 9..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    } else if (angular.isDefined(currentSource._data) && angular.isDefined(currentSource._data.properties) && angular.isDefined(currentSource._data.properties.animation) && angular.isDefined(currentSource._data.properties.animation.enabled) && currentSource._data.properties.animation.enabled && angular.isDefined(currentSource._data.properties.animation.animationFunction) && angular.isFunction(currentSource._data.properties.animation.animationFunction)) {
      if (self.animationManager.existAnimationByFeatureId(currentSource._data.properties.featureId)) {
        self.animationManager.updateAnimationFunction(currentSource._data.properties.featureId, currentSource._data.properties.animation.animationFunction, currentSource._data.properties.animation.animationData);
      } else {
        self.createAnimationFunction(sourceObject.id, currentSource._data.properties.featureId, currentSource._data);
Severity: Major
Found in src/factories/sourcesManager.js and 1 other location - About 6 hrs to fix
src/factories/sourcesManager.js on lines 112..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    } else if (angular.isDefined(sourceCreated._data) && angular.isDefined(sourceCreated._data.properties) && angular.isDefined(sourceCreated._data.properties.animation) && angular.isDefined(sourceCreated._data.properties.animation.enabled) && sourceCreated._data.properties.animation.enabled && angular.isDefined(sourceCreated._data.properties.animation.animationFunction) && angular.isFunction(sourceCreated._data.properties.animation.animationFunction)) {
      self.createAnimationFunction(sourceObject.id, sourceCreated._data.properties.featureId, sourceCreated._data);
    }
Severity: Major
Found in src/factories/sourcesManager.js and 1 other location - About 6 hrs to fix
src/factories/sourcesManager.js on lines 189..197

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (angular.isDefined(eachFeature.properties) && angular.isDefined(eachFeature.properties.animation) && angular.isDefined(eachFeature.properties.animation.enabled) && eachFeature.properties.animation.enabled && angular.isDefined(eachFeature.properties.animation.animationFunction) && angular.isFunction(eachFeature.properties.animation.animationFunction)) {
          self.createAnimationFunction(sourceObject.id, eachFeature.properties.featureId, eachFeature);
        }
Severity: Major
Found in src/factories/sourcesManager.js and 1 other location - About 4 hrs to fix
src/factories/sourcesManager.js on lines 179..187

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 122.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        if (angular.isDefined(eachFeature.properties) && angular.isDefined(eachFeature.properties.animation) && angular.isDefined(eachFeature.properties.animation.enabled) && eachFeature.properties.animation.enabled && angular.isDefined(eachFeature.properties.animation.animationFunction) && angular.isFunction(eachFeature.properties.animation.animationFunction)) {
          if (self.animationManager.existAnimationByFeatureId(eachFeature.properties.featureId)) {
            self.animationManager.updateAnimationFunction(eachFeature.properties.featureId, eachFeature.properties.animation.animationFunction, eachFeature.properties.animation.animationData);
          } else {
            self.createAnimationFunction(sourceObject.id, eachFeature.properties.featureId, eachFeature);
Severity: Major
Found in src/factories/sourcesManager.js and 1 other location - About 4 hrs to fix
src/factories/sourcesManager.js on lines 108..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 122.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (angular.isDefined(layerObject.layout) && layerObject.layout !== null) {
      for (var eachLayoutProperty in layerObject.layout) {
        if (layerObject.layout.hasOwnProperty(eachLayoutProperty)) {
          var layerLayoutProperty = this.mapInstance.getLayoutProperty(layerObject.id, eachLayoutProperty);
Severity: Major
Found in src/factories/layersManager.js and 1 other location - About 3 hrs to fix
src/factories/layersManager.js on lines 192..202

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if (angular.isDefined(layerObject.paint) && layerObject.paint !== null) {
      for (var eachPaintProperty in layerObject.paint) {
        if (layerObject.paint.hasOwnProperty(eachPaintProperty)) {
          var layerPaintProperty = this.mapInstance.getPaintProperty(layerObject.id, eachPaintProperty);
Severity: Major
Found in src/factories/layersManager.js and 1 other location - About 3 hrs to fix
src/factories/layersManager.js on lines 205..215

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  LayersManager.prototype.getPopupRelationByLayerId = function (layerId) {
    var relationArray = this.relationLayersPopups.filter(function (each) {
      return each.layerId === layerId;
    });
Severity: Major
Found in src/factories/layersManager.js and 1 other location - About 2 hrs to fix
src/factories/layersManager.js on lines 53..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  LayersManager.prototype.getEventRelationByLayerId = function (layerId) {
    var relationArray = this.relationLayersEvents.filter(function (each) {
      return each.layerId === layerId;
    });
Severity: Major
Found in src/factories/layersManager.js and 1 other location - About 2 hrs to fix
src/factories/layersManager.js on lines 31..41

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                    if (Object.prototype.toString.call(filter) === Object.prototype.toString.call({})) {
                        if (angular.isDefined(filter.layerId) && angular.isDefined(filter.filter) && angular.isArray(filter.filter)) {
                            map.setFilter(filter.layerId, filter.filter);
                        } else {
                            throw new Error('Invalid filter parameter');
Severity: Major
Found in src/directives/glFilter.js and 1 other location - About 2 hrs to fix
src/directives/glFilter.js on lines 19..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                        filter.map(function (eachFilter) {
                            if (angular.isDefined(eachFilter.layerId) && angular.isDefined(eachFilter.filter) && angular.isArray(eachFilter.filter)) {
                                map.setFilter(eachFilter.layerId, eachFilter.filter);
                            } else {
                                throw new Error('Invalid filter parameter');
Severity: Major
Found in src/directives/glFilter.js and 1 other location - About 2 hrs to fix
src/directives/glFilter.js on lines 12..18

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 85.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language