Sign upLogin

RR0/uDb

View on GitHub
Star

Showing 21 of 39 total issues

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static apparentUfoOccupantActivitiesLabels = {
    OBS: {
      name: 'Observation',
      description: 'Observation: Surveillance.  Chasing/pacing vehicles.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 201..234
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static evidenceAndSpecialEffectsLabels = {
    PHT: {
      name: 'Photos',
      description: 'Photos, movies or videos taken of UFO and related phenomena.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 201..234

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static aliensMonstersLabels = {
    OID: {
      name: 'Humanoid',
      description: 'Smallish alien figure, often "grey".'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 201..234
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static typeOfUfoCraftFlagsLabels = {
    SCR: {
      name: 'Saucer',
      description: 'Classic Saucer, Disk, Ovoid or Sphere.  Not just some light.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 201..234
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static miscellaneousFlagsLabels = {
    SCI: {
      name: 'Scientist',
      description: 'A scientist was involved, as an observer or investigator. Also, Scientific testing of traces or effects of sighting.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 201..234
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static locationFlagsLabels = {
    MAP: {
      name: 'Map',
      description: 'Coordinates are known.  OK to place event on screen maps.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 201..234
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

  public static placesVisitedAndThingsAffectedLabels = {
    NUC: {
      name: 'Nuclear',
      description: 'Any nuclear facility: Power plant.  Military.  Research facility.'
    },
Severity: Major
Found in src/output/db/udb/flags.ts and 6 other locations - About 5 hrs to fix
src/output/db/udb/flags.ts on lines 6..39
src/output/db/udb/flags.ts on lines 45..78
src/output/db/udb/flags.ts on lines 84..117
src/output/db/udb/flags.ts on lines 123..156
src/output/db/udb/flags.ts on lines 162..195
src/output/db/udb/flags.ts on lines 240..273

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 138.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    let sortedRecord: UdbOutputRecord = <UdbOutputRecord>Util.sortProps(record, (prop1, prop2) => {
      let index1 = expectedKeysOrder.indexOf(prop1);
      if (index1 < 0) index1 = 1000;
      let index2 = expectedKeysOrder.indexOf(prop2);
      if (index2 < 0) index2 = 1000;
Severity: Major
Found in src/output/db/udb/UdbRecordFormatter.ts and 1 other location - About 4 hrs to fix
src/output/db/nuforc/NuforcRecordFormatter.ts on lines 16..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 120.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    const sortedRecord: NuforcOutputRecord = <NuforcOutputRecord>Util.sortProps(record, (prop1, prop2) => {
      let index1 = expectedKeysOrder.indexOf(prop1)
      if (index1 < 0) index1 = 1000
      let index2 = expectedKeysOrder.indexOf(prop2)
      if (index2 < 0) index2 = 1000
Severity: Major
Found in src/output/db/nuforc/NuforcRecordFormatter.ts and 1 other location - About 4 hrs to fix
src/output/db/udb/UdbRecordFormatter.ts on lines 43..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 120.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        1: {
          name: 'Canada',
          statesOrProvinces: {
            ALB: 'Alberta',
            ALT: 'Alta',
Severity: Major
Found in src/output/db/udb/geo.test.ts and 1 other location - About 2 hrs to fix
src/output/db/udb/geo.ts on lines 119..136

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        1: {
          name: 'Canada',
          statesOrProvinces: {
            ALB: 'Alberta',
            ALT: 'Alta',
Severity: Major
Found in src/output/db/udb/geo.ts and 1 other location - About 2 hrs to fix
src/output/db/udb/geo.test.ts on lines 57..74

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 82.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class EqualMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 22..30
src/match.ts on lines 31..39
src/match.ts on lines 40..48
src/match.ts on lines 49..57
src/match.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class AboveMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 13..21
src/match.ts on lines 22..30
src/match.ts on lines 40..48
src/match.ts on lines 49..57
src/match.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class AboveOrEqualMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 13..21
src/match.ts on lines 22..30
src/match.ts on lines 31..39
src/match.ts on lines 40..48
src/match.ts on lines 49..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class BelowOrEqualMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 13..21
src/match.ts on lines 22..30
src/match.ts on lines 31..39
src/match.ts on lines 40..48
src/match.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class NotEqualMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 13..21
src/match.ts on lines 31..39
src/match.ts on lines 40..48
src/match.ts on lines 49..57
src/match.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 6 locations. Consider refactoring.
Open

class BelowMatcher extends CriterionMatcher {
  constructor(type: string, prop: string, value: any) {
    super(type, prop, value);
  }
Severity: Major
Found in src/match.ts and 5 other locations - About 2 hrs to fix
src/match.ts on lines 13..21
src/match.ts on lines 22..30
src/match.ts on lines 31..39
src/match.ts on lines 49..57
src/match.ts on lines 58..66

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 78.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        1: {
          name: 'Australia',
          statesOrProvinces: {
            ACT: 'Australian Capital Territory',
            VCT: 'Victoria',
Severity: Minor
Found in src/output/db/udb/geo.ts and 1 other location - About 35 mins to fix
src/output/db/udb/geo.ts on lines 526..536

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        5: {
          name: 'Romania',
          statesOrProvinces: {
            BCU: 'Bacău',
            BHR: 'Bihor',
Severity: Minor
Found in src/output/db/udb/geo.ts and 1 other location - About 35 mins to fix
src/output/db/udb/geo.ts on lines 278..288

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 47.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      case OutputFormat.memory:
        const {MemoryRecordOutput} = await import("./MemoryRecordOutput")
        recordOutput = new MemoryRecordOutput(output, sortedRecord, formatSpec.params)
        break
Severity: Minor
Found in src/output/RecordOutputFactory.ts and 1 other location - About 30 mins to fix
src/output/RecordOutputFactory.ts on lines 27..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 45.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language