module.exports = function(config) {

    // Use ENV vars on Travis and sauce.json locally to get credentials
    if (process.env.SAUCE_USERNAME) {
        console.log('使用全局的sauce key')

Close

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

• Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
• Code is considered more complex for each "break in the linear flow of the code"
• Code is considered more complex when "flow breaking structures are nested"

Further reading

• Cognitive Complexity docs
• Cognitive Complexity: A new way of measuring understandability

            process.exit(1);

Close

Disallow process.exit() (no-process-exit)

The process.exit() method in Node.js is used to immediately stop the Node.js process and exit. This is a dangerous operation because it can occur in any method at any point in time, potentially stopping a Node.js application completely when an error occurs. For example:

if (somethingBadHappened) {
    console.error("Something bad happened!");
    process.exit(1);
}

This code could appear in any module and will stop the entire application when somethingBadHappened is truthy. This doesn't give the application any chance to respond to the error. It's usually better to throw an error and allow the application to handle it appropriately:

if (somethingBadHappened) {
    throw new Error("Something bad happened!");
}

By throwing an error in this way, other parts of the application have an opportunity to handle the error rather than stopping the application altogether. If the error bubbles all the way up to the process without being handled, then the process will exit and a non-zero exit code will returned, so the end result is the same.

Rule Details

This rule aims to prevent the use of process.exit() in Node.js JavaScript. As such, it warns whenever process.exit() is found in code.

Examples of incorrect code for this rule:

/*eslint no-process-exit: "error"*/

process.exit(1);
process.exit(0);

Examples of correct code for this rule:

/*eslint no-process-exit: "error"*/

Process.exit();
var exit = process.exit;

When Not To Use It

There may be a part of a Node.js application that is responsible for determining the correct exit code to return upon exiting. In that case, you should turn this rule off to allow proper handling of the exit code. Source: http://eslint.org/docs/rules/

        },

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

            version: '8.4',

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

            version: '9.2',

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

            process.env.SAUCE_USERNAME = require('./sauce').username;

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

            process.env.SAUCE_ACCESS_KEY = require('./sauce').accessKey;

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/