Sign upLogin

SquirrelJME/SquirrelJME

View on GitHub
Star

Showing 63 of 203 total issues

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 7 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ByteArrayList.java and 6 other locations - About 3 hrs to fix
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/BooleanArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/CharacterArrayList.java on lines 1..147
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/DoubleArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/FloatArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/LongArrayList.java on lines 1..148
modules/cldc-compact/src/main/java/cc/squirreljme/runtime/cldc/util/ShortArrayList.java on lines 1..148

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 312.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Api
    public static int parseInt(String __v, int __r)
        throws NumberFormatException
    {
        /* {@squirreljme.error ZZ19 The radix is out of bounds. (The radix)} */
Severity: Major
Found in modules/cldc-compact/src/main/java/java/lang/Integer.java and 1 other location - About 3 hrs to fix
modules/cldc-compact/src/main/java/java/lang/Long.java on lines 256..308

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 305.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    @Api
    public static long parseLong(String __v, int __radix)
        throws NumberFormatException
    {
        /* {@squirreljme.error ZZ25 The radix is out of bounds. (The radix)} */
Severity: Major
Found in modules/cldc-compact/src/main/java/java/lang/Long.java and 1 other location - About 3 hrs to fix
modules/cldc-compact/src/main/java/java/lang/Integer.java on lines 481..533

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 305.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// Multi-Phasic Applications: SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ClassCsvEntry.java and 2 other locations - About 2 hrs to fix
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ModuleCsvEntry.java on lines 1..101
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/SharedCsvEntry.java on lines 1..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 225.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// Multi-Phasic Applications: SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ModuleCsvEntry.java and 2 other locations - About 2 hrs to fix
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ClassCsvEntry.java on lines 1..102
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/SharedCsvEntry.java on lines 1..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 225.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// Multi-Phasic Applications: SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/SharedCsvEntry.java and 2 other locations - About 2 hrs to fix
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ClassCsvEntry.java on lines 1..102
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/ModuleCsvEntry.java on lines 1..101

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 225.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    LINE_BLEND_DOT
    {
        /**
         * {@inheritDoc}
         * @since 2019/03/24
Severity: Major
Found in modules/midp-lcdui/src/main/java/cc/squirreljme/runtime/lcdui/gfx/AdvancedFunction.java and 1 other location - About 2 hrs to fix
modules/midp-lcdui/src/main/java/cc/squirreljme/runtime/lcdui/gfx/AdvancedFunction.java on lines 307..345

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 220.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    LINE_BLEND_NODOT
    {
        /**
         * {@inheritDoc}
         * @since 2019/03/24
Severity: Major
Found in modules/midp-lcdui/src/main/java/cc/squirreljme/runtime/lcdui/gfx/AdvancedFunction.java and 1 other location - About 2 hrs to fix
modules/midp-lcdui/src/main/java/cc/squirreljme/runtime/lcdui/gfx/AdvancedFunction.java on lines 348..386

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 220.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    public void rawData(int __jarOffset, byte[] __b, int __o, int __l)
        throws IllegalStateException, IndexOutOfBoundsException,
        NullPointerException
    {
Severity: Major
Found in modules/common-vm/src/main/java/cc/squirreljme/vm/DataContainerLibrary.java and 1 other location - About 2 hrs to fix
modules/common-vm/src/main/java/cc/squirreljme/vm/JarClassLibrary.java on lines 93..125

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 213.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    public void rawData(int __jarOffset, byte[] __b, int __o, int __l)
        throws IndexOutOfBoundsException, NullPointerException
    {
        if (__b == null)
Severity: Major
Found in modules/common-vm/src/main/java/cc/squirreljme/vm/JarClassLibrary.java and 1 other location - About 2 hrs to fix
modules/common-vm/src/main/java/cc/squirreljme/vm/DataContainerLibrary.java on lines 100..133

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 213.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/ShortBuffer.java and 2 other locations - About 2 hrs to fix
modules/cldc/src/main/java/java/nio/FloatBuffer.java on lines 1..131
modules/cldc/src/main/java/java/nio/IntBuffer.java on lines 1..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 212.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/IntBuffer.java and 2 other locations - About 2 hrs to fix
modules/cldc/src/main/java/java/nio/FloatBuffer.java on lines 1..131
modules/cldc/src/main/java/java/nio/ShortBuffer.java on lines 1..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 212.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

// -*- Mode: Java; indent-tabs-mode: t; tab-width: 4 -*-
// ---------------------------------------------------------------------------
// SquirrelJME
//     Copyright (C) Stephanie Gawroriski <xer@multiphasicapps.net>
// ---------------------------------------------------------------------------
Severity: Major
Found in modules/cldc/src/main/java/java/nio/FloatBuffer.java and 2 other locations - About 2 hrs to fix
modules/cldc/src/main/java/java/nio/IntBuffer.java on lines 1..130
modules/cldc/src/main/java/java/nio/ShortBuffer.java on lines 1..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 212.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    MODULE("modules.csv", ModuleCsvEntry.class)
    {
        /**
         * {@inheritDoc}
         * @since 2023/09/25
Severity: Major
Found in modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/CsvType.java and 1 other location - About 1 hr to fix
modules/aot-nanocoat/src/main/java/cc/squirreljme/jvm/aot/nanocoat/csv/CsvType.java on lines 164..225

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 193.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language