The method addVote() has an NPath complexity of 768. The configured NPath complexity threshold is 200. Open
public function addVote(Request $request)
{
$object = $this->getObject($request->get('id'), $request->get('type'));
if (!$object) {
- Read upRead up
- Exclude checks
NPathComplexity
Since: 0.1
The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.
Example
class Foo {
function bar() {
// lots of complicated code
}
}
Source https://phpmd.org/rules/codesize.html#npathcomplexity
The method addVote() has a Cyclomatic Complexity of 13. The configured cyclomatic complexity threshold is 10. Open
public function addVote(Request $request)
{
$object = $this->getObject($request->get('id'), $request->get('type'));
if (!$object) {
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Avoid using undefined variables such as '$result' which will lead to PHP notices. Open
$result['time_ago'] = $vote->created_at->diffForHumans();
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$result' which will lead to PHP notices. Open
$results[] = $result;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$result' which will lead to PHP notices. Open
$result['time'] = $vote->created_at->format('d/m/Y H:i:s');
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$result' which will lead to PHP notices. Open
$result['up'] = $vote->up;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$result' which will lead to PHP notices. Open
$result['username'] = $vote->user->name;
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
The class VoteController has a coupling between objects value of 13. Consider to reduce the number of dependencies under 13. Open
class VoteController extends BaseController
{
public function __construct(private readonly \Illuminate\Contracts\Routing\ResponseFactory $responseFactory, private readonly \Illuminate\Auth\AuthManager $authManager, private readonly \Illuminate\Database\DatabaseManager $databaseManager, private readonly \Illuminate\Contracts\Config\Repository $configRepository)
{
}
- Read upRead up
- Exclude checks
CouplingBetweenObjects
Since: 1.1.0
A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability
Example
class Foo {
/**
* @var \foo\bar\X
*/
private $x = null;
/**
* @var \foo\bar\Y
*/
private $y = null;
/**
* @var \foo\bar\Z
*/
private $z = null;
public function setFoo(\Foo $foo) {}
public function setBar(\Bar $bar) {}
public function setBaz(\Baz $baz) {}
/**
* @return \SplObjectStorage
* @throws \OutOfRangeException
* @throws \InvalidArgumentException
* @throws \ErrorException
*/
public function process(\Iterator $it) {}
// ...
}
Source https://phpmd.org/rules/design.html#couplingbetweenobjects
Avoid using static access to class '\Carbon\Carbon' in method 'addVote'. Open
$object->frontpage_at = Carbon::now();
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Strimoid\Models\Entry' in method 'getObject'. Open
'entry' => Entry::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method removeVote uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$object->decrement('dv');
$object->increment('score');
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class '\Strimoid\Models\CommentReply' in method 'getObject'. Open
'comment_reply' => CommentReply::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Strimoid\Models\ContentRelated' in method 'getObject'. Open
'related' => ContentRelated::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Strimoid\Models\Content' in method 'getObject'. Open
'content' => Content::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Strimoid\Models\Comment' in method 'getObject'. Open
'comment' => Comment::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
The method addVote uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dv++;
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method removeVote uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$dv--;
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method addVote uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$group = $object->group;
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method addVote uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$object->increment('dv');
$object->decrement('score');
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Avoid using static access to class '\Carbon\Carbon' in method 'addVote'. Open
'created_at' => Carbon::now(),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Strimoid\Models\EntryReply' in method 'getObject'. Open
'entry_reply' => EntryReply::findOrFail($id),
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid variables with short names like $dv. Configured minimum length is 3. Open
$dv = $object->dv;
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $up. Configured minimum length is 3. Open
$up = $request->input('up') === 'true';
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $dv. Configured minimum length is 3. Open
$dv = $object->dv;
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $uv. Configured minimum length is 3. Open
$uv = $object->uv;
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
private function getObject(string $id, string $type)
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $uv. Configured minimum length is 3. Open
$uv = $object->uv;
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $up. Configured minimum length is 3. Open
$up = $request->input('filter') === 'up';
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}